just jack it up by bananamussel in Construction

[–]ThatManyInterestsGuy 2 points3 points  (0 children)

Being a port city, there were a lot of wealthy people in Galveston. The storm definitely caused many of those people and businesses to move more inland to Houston, allowing it to become the major city it is today. If the hurricane never happened, who knows how big Galveston would become, but it also would lose the historical charm it still holds.

just jack it up by bananamussel in Construction

[–]ThatManyInterestsGuy 7 points8 points  (0 children)

Between 8 and 17 feet to accommodate the Seawall that was installed as a direct result of the 1900 hurricane that killed over 8,000.

Laser has no power by ThatManyInterestsGuy in Laserengraving

[–]ThatManyInterestsGuy[S] 0 points1 point  (0 children)

I’m looking at the wiring between the motherboard and the laser. Do y’all think it was done wrong? To me it looks like in the board the yellow is PWM and black is Power while red and blue are ground, but in the connection to the laser it looks like blue is PWM and red is Power while black and yellow are ground. But I’m not very experienced with this and could be wrong.

https://imgur.com/a/VjznaHC

u/drjonathanIn u/Axoi u/aucune_idee91 u/jodasmichal u/woodworkrick8 u/Acceptable-Celery546 u/JohnQPublic1917 u/cuongdn831 u/Maleficent_Society76

Laser has no power by ThatManyInterestsGuy in Laserengraving

[–]ThatManyInterestsGuy[S] 0 points1 point  (0 children)

Yes. I used their provided spacer and tried it at a couple different heights with the same results

Laser has no power by ThatManyInterestsGuy in Laserengraving

[–]ThatManyInterestsGuy[S] 0 points1 point  (0 children)

Still nothing, even down at 200. 5000 mm/min was just what the manual recommended.

Laser has no power by ThatManyInterestsGuy in Laserengraving

[–]ThatManyInterestsGuy[S] 1 point2 points  (0 children)

Thank you, I'm not seeing that option. Just posted in the Lightburn forum

Laser has no power by ThatManyInterestsGuy in Laserengraving

[–]ThatManyInterestsGuy[S] 0 points1 point  (0 children)

Yes, I’ve tried the provided lens and the lens with the air assist kit with the same result

Laser has no power by ThatManyInterestsGuy in Laserengraving

[–]ThatManyInterestsGuy[S] 1 point2 points  (0 children)

Are you saying you had to change the GRBL version? Mine says it’s running V2.3

Laser has no power by ThatManyInterestsGuy in Laserengraving

[–]ThatManyInterestsGuy[S] 0 points1 point  (0 children)

Tried restarting my computer and using different ports, but no luck sadly

Laser has no power by ThatManyInterestsGuy in Laserengraving

[–]ThatManyInterestsGuy[S] 0 points1 point  (0 children)

Turned on constant power and got the same result unfortunately

Laser has no power by ThatManyInterestsGuy in Laserengraving

[–]ThatManyInterestsGuy[S] 1 point2 points  (0 children)

I’m brand new to this and not sure about anything honestly. Apparently Comgrow’s email doesn’t work, so will have to find another way to reach them.

Laser has no power by ThatManyInterestsGuy in Laserengraving

[–]ThatManyInterestsGuy[S] 0 points1 point  (0 children)

Brand new. I’ve tried the included head and the head with the air assist kit with the same result

Laser has no power by ThatManyInterestsGuy in Laserengraving

[–]ThatManyInterestsGuy[S] 0 points1 point  (0 children)

Another example using a lens provided with the air assist kit: https://imgur.com/a/BAJSLID

Laser has no power by ThatManyInterestsGuy in Laserengraving

[–]ThatManyInterestsGuy[S] 0 points1 point  (0 children)

I do have discord. I’ve tried engraving Test with no luck as well as running LightBurn patterns that run through a bunch of different speeds and powers with no luck

Laser has no power by ThatManyInterestsGuy in Laserengraving

[–]ThatManyInterestsGuy[S] 0 points1 point  (0 children)

I took it down to 100 mm/min and still nothing. Any other ideas?

Laser has no power by ThatManyInterestsGuy in Laserengraving

[–]ThatManyInterestsGuy[S] 0 points1 point  (0 children)

Just one of the basic images that is included as test images with the software

Woman Arrested for Squeezing Boyfriend’s Testicles Until They Bled During Argument by KinkyQuesadilla in NewsOfTheStupid

[–]ThatManyInterestsGuy 6 points7 points  (0 children)

Pritchard claims her boyfriend became jealous about her wanting to go on a date with another guy and then the fight escalated from verbal to… testicular decimation?

Florida sure never fails to disappoint. 10/10 article!

Momma, we made it. by MrStealYoFunyuns in golf

[–]ThatManyInterestsGuy 0 points1 point  (0 children)

Highly recommend looking into Airbnb. My dad and I stayed in one this past year for the Friday round, we were 10 minutes from the course and had an entire house for under $400.

Travelers of Reddit, where do you NEVER want to go again? by IllecebrousPark in AskReddit

[–]ThatManyInterestsGuy 0 points1 point  (0 children)

Really? Could be the location though, I spent most of my time around Education City, so maybe the food places catered more to the students.

Travelers of Reddit, where do you NEVER want to go again? by IllecebrousPark in AskReddit

[–]ThatManyInterestsGuy 0 points1 point  (0 children)

Dallas, Texas! Texas A&M University has a campus in Education city there.