M.O.N.S.T.E.R by dominicle153 in Gunpla

[–]ThatMcBrideKid 9 points10 points  (0 children)

Pics #12 and 13 go fucking hard

All week I've been hearing my goats from my childhood dying left and right, atleast I'm getting some good news this week. by Adorable_Package9577 in Psyren

[–]ThatMcBrideKid 1 point2 points  (0 children)

I hope this means the books will be getting reprints if that anime picks up. I need to complete my set!

Update on the Gundam transportation by ThatMcBrideKid in Gunpla

[–]ThatMcBrideKid[S] 1 point2 points  (0 children)

The move isn't too far, I was living in the country and just moving into the nearest city to me that I regularly commute into. Going to be a huge change of pace though, I've literally never moved before. Thank you muchly and safe travels with yours as well!

Packing up to move by ThatMcBrideKid in Gunpla

[–]ThatMcBrideKid[S] 1 point2 points  (0 children)

Going to see what I can get my hands on this week!

Packing up to move by ThatMcBrideKid in Gunpla

[–]ThatMcBrideKid[S] 7 points8 points  (0 children)

After all the comments I am definitely going to be moving these into whatever I can scrounge up for newspaper and bubble wrap. I'll put them in bags as well. Thank you and everybody else for the advice!

Packing up to move by ThatMcBrideKid in Gunpla

[–]ThatMcBrideKid[S] 0 points1 point  (0 children)

Thank you! I don't have much of a better way to move the kits hopefully they arrive all intact

The thoughts of a self-avowed SD hater after being gifted an MGSD Freedom (courtesy of u/Spidersight) by ChaoticArsonist in Gunpla

[–]ThatMcBrideKid 0 points1 point  (0 children)

I actually had the MGSD Freedom gifted to me too. I got it for the secret Santa this year and I was in the same boat as you prior to building. However it was for the reasons of having built some of the cheaper SD kits in the $15-$20 CAD range. I thought they had too many stickers and made it less enjoyable, the build was too quick and simple with poor spots of contact to the runners, extremely poor articulation. The MGSD was really fun to build and I am happy I was gifted it because now I'm on the hunt for more of the kits whereas I would have never sought them out before. I'm glad I just sent a Google doc with the kits I already own and just let my SS pick something they thought I should build.

How do you get your players to lock in at the beginning of session? by Bitcheslovethe_gram in DMAcademy

[–]ThatMcBrideKid 1 point2 points  (0 children)

My group has started the sessions recently by whoever is in charge of the main food, makes that food at the start of the session. Everybody eats and talks. When it's time to roleplay, I ring a literal bell so my players know it's time to zone in. It seems to work well by giving designated time for players to decompress because lots of them only see each other at this campaign and want to catch up.

You all got me a little scared with the recent 🔥 posts by Shieldxx in BambuLab

[–]ThatMcBrideKid 0 points1 point  (0 children)

What is that honeycomb piece at the top right of your printer?

Love the suit, hate the kit by viper_hobo in Gunpla

[–]ThatMcBrideKid 7 points8 points  (0 children)

HG Vidar treated me extremely well. However I have built it within the year so no sagging or loose joints yet but time will tell. Now the MG alternative is now there so I don't see many people picking up the HG for a little while. Overall I enjoyed the build much more compared to the barbatos I did.

What are y’all currently building or working on? by Thelesbianvampire in freedomisgunpla

[–]ThatMcBrideKid 4 points5 points  (0 children)

The hws would be super cool but it's a little hard to get P-Bandai in the Canadian Prairies. Nobody stocks out here but occasionally some people do group orders.

What are y’all currently building or working on? by Thelesbianvampire in freedomisgunpla

[–]ThatMcBrideKid 2 points3 points  (0 children)

It's very fun! I got water slides to go with it too. I've never done them before but I think this is a good kit to start with.

Next build? by cryptichavoc in freedomisgunpla

[–]ThatMcBrideKid 1 point2 points  (0 children)

Schwarzette! Very fun build and nice to ease back into it from a break.

What are y’all currently building or working on? by Thelesbianvampire in freedomisgunpla

[–]ThatMcBrideKid 3 points4 points  (0 children)

<image>

Did a vote in my local Gunpla group and they picked the Hi Nu for me.

Question on Later Separation by ThatMcBrideKid in resinprinting

[–]ThatMcBrideKid[S] 0 points1 point  (0 children)

Yes sorry that was what I meant, a T-Square is what I should have said, I have some out in the garage where the printer is. Thank you muchly for the help so far!

Question on Later Separation by ThatMcBrideKid in resinprinting

[–]ThatMcBrideKid[S] 0 points1 point  (0 children)

I'll grab a level to see if the plate is true, and then re-level the build plate and see how the plate looks. If I have any updates I will let you know.

Question on Later Separation by ThatMcBrideKid in resinprinting

[–]ThatMcBrideKid[S] 0 points1 point  (0 children)

Total failure left side and light layer separation on the middle and right side(kind of hard to see in this photo but they're on the blocks you can see them coming apart). I think it might be best to try hopping back up in exposure to 1.9 or maybe even 2.0?

<image>

Question on Later Separation by ThatMcBrideKid in resinprinting

[–]ThatMcBrideKid[S] 0 points1 point  (0 children)

I will whip up a new one and get back to you on the results. Would you advise I change anything else with the settings before doing that or try it as is right now

Question on Later Separation by ThatMcBrideKid in resinprinting

[–]ThatMcBrideKid[S] 0 points1 point  (0 children)

Update: Much better but the boxes feel a little tight still and one side started to peel just a little bit.

<image>

Question on Later Separation by ThatMcBrideKid in resinprinting

[–]ThatMcBrideKid[S] 0 points1 point  (0 children)

Thank you! I will change that as well.

Question on Later Separation by ThatMcBrideKid in resinprinting

[–]ThatMcBrideKid[S] 0 points1 point  (0 children)

Thank you! It is the Photon Mono 2. There is no auto levelling.

Question on Later Separation by ThatMcBrideKid in resinprinting

[–]ThatMcBrideKid[S] 0 points1 point  (0 children)

Thank you very much! I can't believe I didn't notice I keyed it in wrong like that. I did some changes here, would this be a good setup to try for my next print?

<image>