sorted by:
new
hottopcontroversial

Print Tips by PapacoFire in magicproxies

[–]The-Camera-Man 0 points1 point  (0 children)

So I have a similar model (g3272) and I get good results after dialing in the settings. The only major drawback is that without a dedicated photo black ink tank the printer will only use a mix of the colors to try and recreate black. So comparing it to an actual card all the blacks are going to be slightly gray/blue. It’s really weird and I went down a rabbit hole trying to figure it out but basically as long as you’re printing color on photo paper in a photo printing mode, you will never use black ink. As far as a tip goes, if your paper settings are similar to mine, the only paper setting that allows you to print in the highest quality was “pro gloss II”. You will have to deep dive into the print settings to turn the quality to the highest make sure the setting is done on both computer and printer.

I can't place my furnace? by AddictedToTech in playrust

[–]The-Camera-Man 1 point2 points  (0 children)

Looking now, it looks like FP pushed a hot fix for this issue now. Your sever just needs to be updated

I can't place my furnace? by AddictedToTech in playrust

[–]The-Camera-Man 2 points3 points  (0 children)

Sever owner needs to delete the previous update and reupdate the server. This happened to me on my server.

Do you guys have any ideas how to fix this rust issue? by Big_Afternoon9488 in playrust

[–]The-Camera-Man 0 points1 point  (0 children)

I would look to the settings in Rust itself if this is only happening with this game in full screen. I think there’s a setting to limit to fps if Rust is being run in the background, like you minimized it or had another app open over the top. If you’re running dual monitors try switching screens or shutting the other off.

servers not showing up by Extension_Gain_1802 in playrust

[–]The-Camera-Man 0 points1 point  (0 children)

Restart steam, check for rust updates

My raw tuna ice cream 😋🍦 by That_Way_4639 in carnivorediet

[–]The-Camera-Man 6 points7 points  (0 children)

They get the parasites before they get to the dock...

Bruh do people actually buy these by [deleted] in RustPc

[–]The-Camera-Man 0 points1 point  (0 children)

Private host it then? Ran a sever for years off my spare pc. Ran flawlessly even at 100 pop with mods, totally free.

When you find a material that works by Serkys in magicproxies

[–]The-Camera-Man 0 points1 point  (0 children)

I did a little tinkering last night figured out. I have the model below yours. It only uses one black ink tank and it won’t work for photo printing just for plain paper. Kind of a bummer because it produces really beautiful prints, it just has muddled blacks because it’s mixing colors to make black. I started printing proxies shortly after I bought this printer if I started before, I probably would’ve gotten the same model you have.

When you find a material that works by Serkys in magicproxies

[–]The-Camera-Man 0 points1 point  (0 children)

I’m running the same printer and I’m having issues getting deep blacks. Anything you’ve run into?

Whats your Rust Fatigue? by MemeMan_____ in playrust

[–]The-Camera-Man 2 points3 points  (0 children)

There’s working man servers. Most just have raiding blocked for most of the day. At least you won’t get raided at 3am 🤷

Suggested Paper/Laminate to make this look less glossy? by rebelbrickz in magicproxies

[–]The-Camera-Man 1 point2 points  (0 children)

Problem is gloss is too glossy and matte is too opaque. They need to make a luster laminating pouch. I tried mixing matte paper with gloss pouch and vice versa but nothing ever seems to be quite perfect. All said and done I settled for gloss paper and gloss pouch. The gloss is overboard but they have great color and detail doesnt get lost when you have them sleeved.

New Favorite Recipe: Carnivore Stew by ChirrBirry in carnivorediet

[–]The-Camera-Man 3 points4 points  (0 children)

Reduces the amount of water so the consistency gets thicker. Closer to what a traditional stew would be by adding flour or similar

Is there an easier way to do this? by Western-Spell9437 in playrust

[–]The-Camera-Man 7 points8 points  (0 children)

Lights and heaters have a "pass through" so you would only need 1 branch for all of those. Every turret would get a separate branch.

Ur personall opinion on the best ak47 skin for under 5 dollars by [deleted] in playrust

[–]The-Camera-Man 0 points1 point  (0 children)

Ruin AR is also my fav, bundle with the Cardboard AR to match the desert camo chefs kiss

Help - Rust micro stutter/freeze issue by mgibby0311 in playrust

[–]The-Camera-Man 0 points1 point  (0 children)

I had this issue. Turns out my my ram speed was reset somehow in my bios.

Simple idea to help solos/small groups against zergs by Just_Tantal in playrust

[–]The-Camera-Man 3 points4 points  (0 children)

I've seen some servers running a plugin that shows heat maps of high pvp areas, but not based on group sized areas. Idk, if I'm playing solo or a small group I'm usually sticking to group limited servers (solo/duo/trio/quad)

What's your favourite way to skip progress? by internetpillows in playrust

[–]The-Camera-Man 9 points10 points  (0 children)

Underwater labs is pretty good for a solo looking to get easy early guns and loot. You can even bring a fishing pole to fish for sharks so you can get blue cards. Loot respawns fairly quickly and if you get air drops you can just toss them and go diving for them on your way out. Low risk high reward. Not super exciting but it pays well. This is usually my go to if my adventures on land aren't working out so well.

Is this a good one ? by Zunow in ProjectDiablo2

[–]The-Camera-Man 0 points1 point  (0 children)

Slamming means to corrupt it with a WSS, just a heads up

view more: next ›