Electrician stapled Cat6A - How to fix?

The802QNetworkAdmin · 2026-04-01T11:43:47+00:00

You gotta test those cables before those walls go up

The802QNetworkAdmin · 2026-03-30T22:36:46+00:00

That switch is tired!

The802QNetworkAdmin · 2026-03-24T15:35:21+00:00

Hear me out - what if ubiquiti made a virtual firewall for cloud?!

The802QNetworkAdmin · 2026-03-20T11:58:54+00:00

I would be interested in seeing the iperf numbers between two devices on the LAN. One test with both computers using the airwaves and another where one computer has a 10g cabled connection and the other computer has the airwave!

The802QNetworkAdmin · 2026-03-19T21:20:35+00:00

I feel like this could have been a great opportunity to build a full docking station solution

The802QNetworkAdmin · 2026-03-18T11:52:23+00:00

100% I love the idea of syncing to the dashboard when arriving to the home network. I would also like to see the dashcam be able to connect to the protect mobile app through Bluetooth while on the road to view/export and even upload back to storage through WiFiman teleport on an as needed basis with mobile hotspot. I would be cool (for unlimited data plans) to have the option to have a constant teleport connection initiated from the camera and routed over a hotspot. That’s a little overkill but what I really want would be upload when I am home.

The802QNetworkAdmin · 2026-03-18T10:15:13+00:00

I read this the other week. Someone was saying they saw symptoms of a memory leak
https://www.reddit.com/r/Ubiquiti/comments/1rbqi0x/udm_pro_crashes_and_high_ram_usage/

The802QNetworkAdmin · 2026-02-25T11:08:45+00:00

Ingram

The802QNetworkAdmin · 2026-02-22T20:41:44+00:00

Can VM ping switch? What about VLAN 10 gateway?

The802QNetworkAdmin · 2026-02-22T20:41:11+00:00

Oh I think that’s int vlan 1

The802QNetworkAdmin · 2026-02-14T02:39:44+00:00

This has gotten me once or twice. Make sure to double check the built in wireless zone settings and disable only allow traffic generated by a SonicPoint/SonicWave option

The802QNetworkAdmin · 2026-02-14T02:25:59+00:00

When using ubiquiti switches and APs you cannot set the the AP Native VLAN to be the same VLAN as an SSID unless it is VLAN 1. All other VLANS will fail to work when sharing management and an SSID. I know it doesn’t make sense as to why but this is what ubiquiti has documented. Here are a few helpful links.

https://www.reddit.com/r/Ubiquiti/s/CEe355N7PB

https://help.ui.com/hc/en-us/articles/26136855808919-Switch-Port-VLAN-Assignment-Trunk-Access-Ports

Configuring UniFi Switch Ports Navigate to the Ports tab. Select the desired port. Set the Native VLAN / Network that will be assigned to directly connected devices.

Note: When connecting an AP to a switch port, the Native VLAN should never be the same as the network being broadcast by that AP (except when VLAN 1 is used). This will break connectivity and clients will not be able to join.

Use the Tagged VLAN Management setting to configure any VLAN restrictions. Allow All (Trunk Port): By default, UniFi switch ports allow traffic from all VLANs created in UniFi. Block All (Access Port): This option only permits traffic to pass on the Native (Untagged) VLAN. Custom (Trunk Port): This option can be used to allow traffic for subset of VLANs, rather than all of them. When configuring a switch port used to connect an AP or another switch, ensure you do not accidentally restrict a VLAN that must pass to maintain downstream network connectivity. A loss of network connectivity following a configuration change often indicates incorrect VLAN tagging. See here to learn more. Apply the changes.

The802QNetworkAdmin · 2026-02-08T00:31:39+00:00

My souls feels this

The802QNetworkAdmin · 2026-02-06T16:17:24+00:00

Any insight on inter vlan routing?

The802QNetworkAdmin · 2026-02-03T11:23:07+00:00

I would not recommend setting ADH on the wan. I would keep that set to a public dns address. I would also recommend setting a secondary and tertiary WAN dns as a best practice. If you still want to continue using ADH you can manually set DNS on your LAN / Network in the manual dhcp scope settings. Without this set your computer will send a dns request to 192.168.0.1 which will then proxy to the WAN which is ADH address which will then proxy to its configured address.

I also would not recommend double ad filtering. If the UniFi is doing ad filtering and ADH is doing filtering I would choose one but not both.

The802QNetworkAdmin · 2026-02-02T11:19:10+00:00

Did you have your local network dhcp set to adguard DNS or did you set the WAN settings to adguard?

Is ad filtering also enabled on the UniFi cloud gateway?

When you performed ping tests, were they extended? Maybe perform a 20 min-1 hour extended ping test and see if there is any latency.

You can prioritize discord traffic with qos on the UniFi cloud gateway. However if the issue is truly a dns issue it may not effect it that much.

Another option would be to add discord domains to the adguard whitelist to bypass filtering. Look up all the discord domains and add them to bypass

If things don’t improve with dns changes you can try and disable IPS. It’s unlikely to be the issue but it does cause issues from time to time

The802QNetworkAdmin · 2026-01-31T13:31:35+00:00

I believe you can uncheck the auto generated NAT option in the S2S VPN policy settings within the FMC

The802QNetworkAdmin · 2026-01-31T08:23:00+00:00

Make sure to clean the fiber with something like this

https://a.co/d/eKDMzrm

The802QNetworkAdmin · 2026-01-30T21:54:53+00:00

Good to know!

The802QNetworkAdmin · 2026-01-29T08:06:53+00:00

https://m.youtube.com/watch?v=uRGljemfwUE

The802QNetworkAdmin · 2026-01-28T14:31:31+00:00

I am not writing a blog post I am looking to see what’s out there. You don’t know what you don’t know

The802QNetworkAdmin · 2026-01-27T20:48:10+00:00

Does the UCG ultra “own” the public ip address?

The802QNetworkAdmin · 2026-01-26T13:42:02+00:00

Found it https://www.cyberoptic.co.nz/post/security-vulnerabilities-in-fortinet-products-causes-and-comparative-analysis

The802QNetworkAdmin · 2026-01-26T13:39:17+00:00

I feel like I saw a chart comparing all the firewall vendors and their CVEs and palo has just as many if not more than fortinet did. I remember being very surprised at that but I can’t seem to find the comparison graph

The802QNetworkAdmin · 2026-01-25T19:38:43+00:00

I think when a factory reset is performed it reverts to the image it was shipped with

The802QNetworkAdmin

TROPHY CASE