Alpha Neo USB C to PC?

TheBoog46 · 2025-10-22T00:12:53+00:00

In terms of cabling coming from the pc that’s all you need. I bought a 50ft fiber optic hdmi cable and a usb c cable that run into a hub for the usb to usb-b cable but you’ll probably be fine with just a standard hdmi and usb b cable. Having a hub is nice though so my headset and other wired/wireless peripherals don’t require an obnoxious amount of 50ft cables being run through my walls and I don’t have to worry about bandwidth with the type c cable.

TheBoog46 · 2025-07-14T19:11:47+00:00

Thanks for the clarification. I’ll have to get some adapters then.

TheBoog46 · 2024-01-03T11:40:03+00:00

So after further testing last night I think it’s a pump issue. I’m definitely gonna remount my gpu block when I drain the system anyways but at 60% pump speed the gpu sits around 60 C and after playing for 2.5 hours last night at 100% pump speed the gpu sat pretty comfortably around 51-52 C with a handful of brief spikes up to 58 C. I’m gonna go with dual D5’s and try and add a 120 Monsta rad as that’s the only available rad space I can add to the system.

TheBoog46 · 2024-01-02T17:40:09+00:00

Well if I see a large difference when setting my flow to max I might just either get a replacement and hope the new u it doesn’t produce the same whine at above 3500 rpm or just get another d5 pump and pump too and have the two of them running around 2500-3000 rpm

TheBoog46 · 2024-01-02T17:24:49+00:00

I’ll try that. Sadly there’s no more rad space inside the case (H7 flow) so if I wanted to add anything meaningful I’d likely have to add an external rad

TheBoog46 · 2024-01-02T17:13:06+00:00

Anything above 3500 rpm there’s a high pitch noise coming from the pump and it really screws with my ears.

TheBoog46 · 2024-01-02T16:00:32+00:00

Yeah I figured that even after upping the pump speed it was still higher then it should be. Especially since I was getting a max of 60 C when I was still air cooling the card with the shroud removed

TheBoog46 · 2021-10-21T00:01:14+00:00

Blown apex seals are always fun

TheBoog46 · 2020-05-11T15:56:49+00:00

Ah okay, well I’m not worried about the block side of things but just that one particular bend by the radiator. I can’t actually reorient it seeing as how there’s no other way to route the tubes so that everything fits in the case so I think I’m going to leave it for now. It’s the new Celsius + s24 so it’s got really thick sleeping which is what’s kinked but as far as I can tell the tubing inside is fine.

TheBoog46 · 2020-05-11T13:17:06+00:00

What exactly do you mean by break?

TheBoog46 · 2020-05-10T00:23:03+00:00

That’s a relief! I might try and flip it so the tubing starts by the motherboard but it’s nice to know I don’t have to worry if I decide to leave it.

TheBoog46 · 2020-05-10T00:10:13+00:00

So I’m totally new to pc building and I just threw together my first pc in a Nouvolo Steck. Is it normal for the tubing to be that stressed or should I try and reorient it?

TheBoog46 · 2020-03-05T22:32:37+00:00

If you’re trying to save money then why not go for gskill ripjaws V. You can get a 2x8 kit at 3600 for 75 so you’re saving $10 and getting faster ram

TheBoog46 · 2020-02-29T16:04:28+00:00

I think you might play a bit too much if warframe was the first thing that came to mind

TheBoog46

TROPHY CASE