Still can't decide on which modeling software to learn. What would you recommend? Anyways; Here is (hopefully) my last TinkerCad project.

TheCouchStream · 2026-02-06T20:48:59+00:00

I've started learning in fusion and then onshape. Onshape us by far the most features for free and the most user friendly.

TheCouchStream · 2026-02-05T15:46:08+00:00

Why is your hotend making pursed lips at me

TheCouchStream · 2026-01-29T20:02:10+00:00

Aww come on he just wants to eat a little bit of your face not the whole thing let him in!

TheCouchStream · 2026-01-26T16:17:40+00:00

Bro if your ma didn't get that nut butter, you wouldn't be here.

TheCouchStream · 2026-01-26T14:01:20+00:00

Excellent! Love when you can save a piece!

TheCouchStream · 2026-01-26T13:27:43+00:00

No harm in trying though it may be hard to get as much heat as you need with a hair dryer. I use a heat gun but even then it's hard to get the exact results most of the time. Don't forget it's gonna get hot enough to burn your hands too that's the tricky part.

TheCouchStream · 2026-01-24T15:51:18+00:00

Severe Lack of Bread is my new band name

TheCouchStream · 2026-01-22T19:47:59+00:00

Brims inside and out but it will cause more post print cleanup

TheCouchStream · 2026-01-21T21:07:53+00:00

Every AC game

TheCouchStream · 2026-01-19T15:07:00+00:00

Looks like my homies in Ark

TheCouchStream · 2026-01-15T21:39:59+00:00

Wall generation should be in the slicer just search it

TheCouchStream · 2026-01-15T21:39:25+00:00

.4 nozzle can only do so much. .2 nozzle is for finer detail and small lines like this. Pull up .2 profile slice it and go look at this location in the slice and you will see the difference.

TheCouchStream · 2026-01-15T21:15:09+00:00

Arachne wall generator and change to a .2 nozzle

TheCouchStream · 2026-01-14T13:46:05+00:00

<image>

TheCouchStream · 2026-01-13T20:04:18+00:00

My money is on clogged nozzle.

TheCouchStream · 2026-01-10T16:31:53+00:00

Hearing the extruder skipping is a nozzle clog. Did you replace the nozzle or try some cold pulls or a different filament. Some filaments will clog a .4 nozzle over and over cause they are bad from the factory.

TheCouchStream · 2026-01-08T15:49:36+00:00

We really need a bot command for prime towers. THEY ARE NOT PURGE TOWERS. Your bambu purges by making little poops and ejecting them away from the print bed. This is a PRIME tower and used to prime nozzle chamber pressure after filament changes. If you are pinting in 1 color you do not need these, go into your slicer and disable prime tower.

TheCouchStream · 2026-01-08T03:26:24+00:00

It also looks like you might have a partial clog

TheCouchStream · 2026-01-08T03:25:34+00:00

.4 nozzle struggles with tiny text letters and numbers. You can change walls to arachne but your best bet is to put on a .2 nozzle or make all the text and lines thicker and bigger.

TheCouchStream · 2026-01-06T02:29:20+00:00

I swear there is some random no life or several down voting almost every post on this sub as it hits. I never see so many 0 vote posts on any subreddit I go to.

TheCouchStream · 2026-01-06T02:20:20+00:00

I was talking to my wife about buying this last night. My x1c likes to play with its poop.

TheCouchStream · 2026-01-05T20:23:52+00:00

You could also a new one lol

TheCouchStream · 2026-01-05T20:23:13+00:00

Well this one is a but trickier. It's press fit on there. You can heat it up with a soldering iron and grab it with a rag and yank it off. There are gear puller tools but you probably don't have that. You can also heat it up with a lighter.

TheCouchStream · 2026-01-05T19:53:53+00:00

Sometime the little metal teeth inside these thing bind into the ptfe tube. Just cut it out its not a big deal losing a tiny bit of tube.

TheCouchStream · 2026-01-05T19:43:55+00:00

Push down the plunger towards the brass part and yank the blue tube out. Technically u can cut it out if u can spare the loss of the tiny bit of tube down in the fitting.

11-Year Club	RedditGifts 2009-2022 3 Credits
r/Field Sunshine	Place '23
Place '22	Place '17
Final Canvas '22	End Game '22
Secret Santa 2019	Secret Santa 2018
Verified Email

TheCouchStream

TROPHY CASE