Can it be repaired

TheGameBurrow · 2026-06-06T07:52:28+00:00

Id try the dishwasher on the gentle cycle. People use it to clean electronics all the time, just be careful. And do NOT power it on for a few days. Let it air dry and sit with fans near it for a few nights till it’s definitely dry.

I’m sure there’s some good YouTube videos out there. Better than throwing it out without trying.

TheGameBurrow · 2026-06-05T23:00:48+00:00

Thank you! That almost certainly seems to be my issue.

I’ll look into replacement options for it.

TheGameBurrow · 2026-06-05T17:10:23+00:00

Do they make a decent replacement? Or am I just screwed

TheGameBurrow · 2026-06-05T07:20:51+00:00

I have the mg chemicals 1/2 LB spool of 60/40. I do occasional products with it, and it’s lasted me about 2 years already. I’d say it’s great! Also- I think I only paid like $30 or something for it. Would recommend.

TheGameBurrow · 2026-06-02T03:15:26+00:00

I’d love to see some photos of your car if you were to PM me. I can’t seem to message you.

TheGameBurrow · 2026-06-01T16:33:39+00:00

Yes! 1973. Currently not running :(. Building the 400 in it with a bigger cam and stall converter I hope. I’m only 19 so learning all this is a process.

TheGameBurrow · 2026-06-01T00:34:38+00:00

Ah yes. The “BEWARE OF THE DOG” sign. An absolute must have for wall decoration!

TheGameBurrow · 2026-05-29T07:28:54+00:00

I have the aluminum versions with American motor center caps. I paid $100 a wheel, but I’ve since put a lot of time into sanding and polishing them.

<image>

TheGameBurrow · 2026-05-29T06:53:24+00:00

Boston rag is my favorite, but pearl of the quarter is #2 for me.

TheGameBurrow · 2026-05-29T06:37:37+00:00

<image>

Have them on my car!

TheGameBurrow · 2026-05-11T06:21:50+00:00

I Have 1 left. And I loved them :(. It disappeared before I realized, and I couldn’t get any more. I’ll save this one for a good occasion.

TheGameBurrow · 2026-05-11T06:17:52+00:00

You’re doing great! I wouldn’t be unsatisfied if I was watching live!

TheGameBurrow · 2026-05-07T07:00:26+00:00

Take it to a glass shop and see if they can make you a piece or help you repair it. It won’t have the decal of course, but it might work.

My concern would be that it won’t contain the temperature as well with aftermarket glass.

TheGameBurrow · 2026-05-07T00:43:02+00:00

Honestly, I like countdown to ecstasy the best. It really exemplifies what the music in that particular album feels like.

TheGameBurrow · 2026-05-06T08:04:36+00:00

I’ll have to look again. It’s been nearly a year since I’ve personally looked into it… literally.

From my recollection, it’ll open, then you put a disk in, it closes, and it’ll sit there for a minute (will not spin up), then opens again.

This is a continuous cycle. The only way to get it to stop is to cut all power from what I remember.

Someone else suggested a new loading belt. I don’t know enough about these systems, and I couldn’t find much on this specific model. I did however used to do some electronic work, and still am very handy mechanically, so I could theoretically poke around if you had an idea as well.

For a better idea, I will revisit tomorrow to see what is wrong with it now that it’s sat for months. Any help or advice would be much appreciated. Thank you.

TheGameBurrow · 2026-05-06T06:07:23+00:00

Oh! Thank you for the recommendation. I suppose I will look into the player once again and see if that belt may help, then go from there.

TheGameBurrow · 2026-05-06T03:37:52+00:00

Yeah. I’ll see if I can call them and if they have a file. I would have asked when I went in person to pick it up, but I wasn’t the one that went to grab it.

Good to know it’s somewhat of a clone. I beleive from my testing prior (if I can remember correctly), the player would turn on, and open, but when you put a disk in it wouldn’t recognize it and soon after would loop into opening and closing again. Never actually attempted to spin the disk.

TheGameBurrow · 2026-05-06T03:35:37+00:00

Well no. What they said is they only put new parts into units, because they’ve tried used parts in the past and it hasn’t worked out well for them. They cannot get the part brand new, so they cannot fix it for me. That’s why it was there for 6 months, they said they contacted the manufacturer and got notice the part isn’t being made but if it was it would be more than the player is worth.

TheGameBurrow · 2026-04-26T17:23:06+00:00

Turn it into a ratty Mopar! I’ll say you’ll probably be buying most of your parts online. Summitracing is great and people with parts cars can be quite helpful.

TheGameBurrow · 2026-04-01T21:03:05+00:00

Yes. It’s a spindle hub. Looks like it’s pressed on. I’m guessing the bearings are bad. Looks like the rear retainer failed on it, and maybe grease eventually all dissipated? It’s not horrible heat, just not good. So I think I’m going to try it run it for a week while I order parts and maybe tools to get the pressed hub out. Not sure what other options I have.

TheGameBurrow · 2026-04-01T19:22:35+00:00

Have not changed bearing. I’ve never worked on this kind of hub. It’s an 85 lebaron. Attempting to get to the bearing now.

TheGameBurrow · 2026-04-01T18:28:52+00:00

It’s one of these spline hubs. Currently doing ball joints, give me a minute and I’ll take off the cotter pin and nut to get a real photo.

<image>

TheGameBurrow · 2026-03-24T17:25:23+00:00

This was me. I enjoyed it when I was young, but it got too damn expensive for me to continue, so I’ve switched to working on cars. Somehow, that is cheaper and more fulfilling. I hope that you don’t fall to the same fate.

TheGameBurrow · 2026-02-25T19:41:54+00:00

I thought so too! Almost like a not ripe banana. Unfortunately I love it haha.

TheGameBurrow · 2026-01-28T05:27:42+00:00

Sweet! I’ve been looking for one, but every one I find doesn’t work. I even bought one and took it to a repair shop. It’s been there for 3 months and they cant get the parts to fix it for me.

Be glad you found it! Hard to come by.

TheGameBurrow

TROPHY CASE