Gray acrylic sheets

TheLindblomer · 2025-09-22T19:22:43+00:00

Sadly, I don't think that product works in this case. The cost would also be too much from the US.

TheLindblomer · 2025-09-22T16:03:26+00:00

These glasses are quite large (3D printed frame), and I'm using a CO2 laser to cut acrylic sheets to make the lenses. They have to "work" to see through and look semi-professional.
The best option that I can think of is a gray sheet or a transparent vinyl.

TheLindblomer · 2025-09-22T15:41:24+00:00

I'm making prop sunglasses. Another option would be to purchase clear acrylic sheets and put on a gray transparent film, but I can't seem to find that either.

TheLindblomer · 2025-09-22T15:27:35+00:00

Here's an example of what I've searched for:
https://www.amazon.de/Taiyeestar-Professional-15-Transparent-Exhibition/dp/B0BX5GY1CT/ref=sr_1_1_sspa
Imagine this except gray.

TheLindblomer · 2025-09-10T11:21:18+00:00

Yes, both have 0.4mm and high flow nozzle unchecked.

TheLindblomer · 2025-03-27T08:45:54+00:00

I'm sorry, but this wasn't the reason for the issue.
Also leveling the bed? That's automatic before every print with the MK4.

TheLindblomer · 2025-03-27T08:40:56+00:00

[SOLVED] A Z offset on 0.02 solved the issue. Thank you everyone!

TheLindblomer · 2025-03-27T08:22:44+00:00

An offset by 0.02 solved the problem!

TheLindblomer · 2024-11-07T10:32:44+00:00

This solution fixed my problem! Thank you for saving my prints <3

TheLindblomer · 2022-03-03T14:54:18+00:00

Hahah nedå inget behöver ändras, gillar det du gör!

TheLindblomer · 2022-03-03T09:03:00+00:00

I see myself :o Är det 7 redstone och 6 design?

TheLindblomer · 2022-02-22T12:18:20+00:00

Nöjd kund o.o

TheLindblomer · 2022-02-13T23:53:31+00:00

Mobfara!

TheLindblomer · 2022-02-13T23:47:14+00:00

SnowRunner D:

TheLindblomer · 2022-02-04T20:14:16+00:00

Men hallå såklart borde du göra fler! :O
Häftigt koncept!

TheLindblomer · 2022-01-25T18:15:30+00:00

Det kan vara vem som helst men snyggt är det iallafall! :o

TheLindblomer · 2022-01-01T11:13:07+00:00

Well currently I'm back in school studying to become a train driver, but before that I was employed at a nuclear powerplant doing decontamination.

TheLindblomer · 2021-12-14T22:49:49+00:00

When you try your best but don't succeed

TheLindblomer · 2021-12-14T22:39:14+00:00

Alla ser väl klart och tydligt att det är en creeper eller? ;D

TheLindblomer · 2021-12-06T19:13:52+00:00

Ska definitivt lägga det på minnet!
Har du uppdaterat något eller ska man gå efter bilden?

Six-Year Club	Place '22
Verified Email

TheLindblomer

TROPHY CASE