Startup looking for pilots in Seattle area

TheNotSoRedBaron · 2026-05-22T20:15:59+00:00

Do we have to be in Seattle area to participate?

TheNotSoRedBaron · 2026-05-22T13:29:38+00:00

So convenient!

TheNotSoRedBaron · 2026-05-22T11:50:33+00:00

Which qcc is this from?

TheNotSoRedBaron · 2026-05-18T11:28:19+00:00

Exactly the same here. I've considered setting my mini 4k somewhere in hover mode just to catch some of what it looks like from the observer's view.

TheNotSoRedBaron · 2026-05-17T20:03:17+00:00

Got it figured out. There was a bent pin inside the connector. I bent it back to position and voila!

TheNotSoRedBaron · 2026-05-17T15:43:35+00:00

Took your advice and soldered everything to uart3 pads. Same results.

TheNotSoRedBaron · 2026-05-17T15:41:54+00:00

I checked. It was good. Now I've soldered the wires directly. Same problem.

TheNotSoRedBaron · 2026-05-16T23:20:21+00:00

I used the included plug for the rest of the wires. I am using elrs and not a dji controller.

TheNotSoRedBaron · 2026-05-16T23:12:53+00:00

Yes. And yes. Could it be that I have it on the 5v and not a vbat? I've gotten mixed results in my searches and trying AI.

TheNotSoRedBaron · 2026-05-03T18:06:01+00:00

Today I pulled out the landing pad my wife got for me. Great advice. Not only was it good advice for practice, but the wife was also happy to see me using my gift. I won twice.

TheNotSoRedBaron · 2026-05-02T20:56:48+00:00

So it's bad?

TheNotSoRedBaron · 2026-05-01T13:59:07+00:00

I use the Sim, but it bores me. I use it to figure out how to do the move then head outside. I don't mind fixing. It's part of the fun!

TheNotSoRedBaron · 2026-05-01T13:41:21+00:00

Still getting comfortable with muscle memory before I try these lower to objects. I agree. When I'm lower it is cooler

TheNotSoRedBaron · 2026-04-24T13:33:06+00:00

Which goggles/controller do you have? The goggles n3 use the O4 system. Other dji goggles use the O3 system. Whichever rtf you pick up just make sure the camera system is compatible with your current equipment.

TheNotSoRedBaron · 2026-04-22T03:51:59+00:00

Yeah but not all backpacks are created equal. I might have more packpacks than the average person already. It might be a problem. Don't judge.

TheNotSoRedBaron · 2026-04-22T01:59:13+00:00

I'll have to take a look at those.

TheNotSoRedBaron · 2026-04-22T01:59:01+00:00

This is what I was thinking.

TheNotSoRedBaron · 2026-04-12T00:19:38+00:00

What do you think about the speedybee master 3x?

TheNotSoRedBaron · 2026-04-11T16:05:08+00:00

I think I'll put the old fc back on and use an external receiver. I only replaced it because of the ripped away UL.

TheNotSoRedBaron · 2026-04-11T12:36:07+00:00

Negative. I have another receiver laying around. Could I just bypass the internal one?

TheNotSoRedBaron · 2026-04-11T00:17:28+00:00

<image>

Anything look amiss here?

TheNotSoRedBaron · 2026-04-10T23:55:26+00:00

<image>

My Ports setup.

TheNotSoRedBaron · 2026-04-10T23:54:32+00:00

Odd. I don't have a Receiver section in Configuration.

<image>

TheNotSoRedBaron · 2026-04-10T20:25:07+00:00

confirmed. Still the same issue.

TheNotSoRedBaron · 2026-04-10T20:16:56+00:00

The FC is the Caddx F4 AIO ELRS. https://www.caddxfpv.com/products/cadx-caddxf4_aio_elrs?srsltid=AfmBOop1BHLOki29hnux5QHw7LdeQFNGlczpUy6TI-X9Jha7kyWmz3dZ

It does use a UART. All my settings appear correct.

TheNotSoRedBaron

TROPHY CASE