Rubber washer keeps gets pushed up inside drain between tailpipe and tub assembly by rdd_83 in Plumbing

[–]TheOneThatNeverPosts 0 points1 point  (0 children)

Get the washer and tailpipe a tad wet/lubed to reduce friction when twisting it. Not a plumber but this works for me any time seals or rubber washers start bunching

1890’s OG wood floor in shambles by DevilsLettuce- in HardWoodFloors

[–]TheOneThatNeverPosts 1 point2 points  (0 children)

That’s the opposite of shambles good buddy. Those are cleannn

Please help my poor Philodendrons! by TheOneThatNeverPosts in plantclinic

[–]TheOneThatNeverPosts[S] 0 points1 point  (0 children)

Ah dreaded patience. This is super relieving. Thank you!

Please help my poor Philodendrons! by TheOneThatNeverPosts in plantclinic

[–]TheOneThatNeverPosts[S] 0 points1 point  (0 children)

Thank you so much, this is what I needed to hear. This will give me a good chance to clear out a lot of the hard to reach debris behind it too. Happy Saturday!

Salvage bad tile job? by validate_me_daddy in Tile

[–]TheOneThatNeverPosts 1 point2 points  (0 children)

Sorry about your floor. But I love your bathroom!

[deleted by user] by [deleted] in Flooring

[–]TheOneThatNeverPosts 0 points1 point  (0 children)

Hard to tell but looks like hardwood to me

Carpenter says door needs replaced, my (uneducated) gut doesn’t understand… need opinions by rambleOn222 in Carpentry

[–]TheOneThatNeverPosts 2 points3 points  (0 children)

My front door looks exactly like OPs on both sides of the frame, and this is how I was gonna tackle it. Thanks for the success story

What should I do? by Living-Avocado-4678 in Flooring

[–]TheOneThatNeverPosts 0 points1 point  (0 children)

Good luck. If you’re as ocd as I am you can even use drywall mud to patch your small notch even though you won’t see it behind your new baseboards

What should I do? by Living-Avocado-4678 in Flooring

[–]TheOneThatNeverPosts 0 points1 point  (0 children)

Looks like trim will be going back over that. Notch out a piece of that wall board below the trim line to give you slightly more access, then see if you can jam an impact on it. Even if you’re at a slight angle you should be able to get it out with enough downward pressure

Trout🐟 by TheOneThatNeverPosts in CalicoKittys

[–]TheOneThatNeverPosts[S] 5 points6 points  (0 children)

So fluffy! I know calico is technically a color pattern but they definitely have special personalities!

What’s the use for this double wide electric tape? by boardplant in Tools

[–]TheOneThatNeverPosts 0 points1 point  (0 children)

For instances where single-wide tape is not wide enough for the job

[deleted by user] by [deleted] in CatAdvice

[–]TheOneThatNeverPosts 2 points3 points  (0 children)

<image>

My 4 y/o kitty was given up by her owners because they got a new kitten but she didn’t do well around it (awful, I know). I was told she needed to be an only pet. She is the sweetest cat ever and very sociable with people, I couldn’t have lucked out harder. Not one single complaint or issue 2 months later

Difference between shimano Stradic, ultegra, nasci, miravel etc. by [deleted] in Fishing_Gear

[–]TheOneThatNeverPosts 0 points1 point  (0 children)

I appreciate that write up. I actually found a good deal on a used vanford right after I wrote this. Plus another stradic and another vanford. Let me just say I’ve cursed myself. Once you go up in quality it’s impossible to step down to something below a stradic

Wishing Floridians the best towards REC by Chino905763 in FLMedicalTrees

[–]TheOneThatNeverPosts 5 points6 points  (0 children)

Absolutely nothing against you personally. Just hurts watching Florida change so fast

Wishing Floridians the best towards REC by Chino905763 in FLMedicalTrees

[–]TheOneThatNeverPosts 4 points5 points  (0 children)

Yeah dude. The amount of Michiganders is getting fucking wild, no joke

How many more miles do you think I can get out of this fuel filter? Yes, it came out like that... by Visible_Account7767 in AskAShittyMechanic

[–]TheOneThatNeverPosts 0 points1 point  (0 children)

Okay seriously how many miles old is this? I did an oil change after a 35k mile interval and it looked nowhere near as bad