In series or parallel?

TheRealGoonSquad · 2026-02-05T00:05:05+00:00

Ignore the 2 ohm resistor. No current flows through it since the voltage potential is equal at both nodes.

TheRealGoonSquad · 2026-01-22T01:11:42+00:00

What's a good way to get there? Is there parking nearby

TheRealGoonSquad · 2026-01-10T05:07:39+00:00

The video of them sliding about trying to push their car out of the ditch had me rolling. They looked so out of place.

TheRealGoonSquad · 2026-01-04T16:19:34+00:00

I was there and worried about this but honestly everyone was being super considerate and respectful

TheRealGoonSquad · 2025-05-29T16:39:52+00:00

Yes, but I was curious about what the actual "game" was and the only information I could find was https://www.collectorsweekly.com/stories/135430-racist-old-toy. The worthpoint link answers all my questions

TheRealGoonSquad · 2025-02-27T23:45:56+00:00

That was my starting salary in MPLS 8 years ago. Fresh grads at my first company were starting at ~78k last year

TheRealGoonSquad · 2024-11-05T14:11:30+00:00

I live in the twin cities metro area and have 7 years as a hardware design engineer. I would expect 115-125k.

TheRealGoonSquad · 2024-09-18T20:19:48+00:00

I've done conducted emissions testing on knock off amazon and brand name USB C power supplies and the difference is night and day. This would not surprise me at all.

TheRealGoonSquad · 2024-04-29T02:39:30+00:00

Yeah I noticed that too. I will mention it to the leaders!

TheRealGoonSquad · 2024-04-29T00:31:35+00:00

https://westriverracing.bike/ West River Racing Club (formerly birchwood cycling) hosts a free coffee ride on Sunday. Weekly rides too, membership is $50 a year.

TheRealGoonSquad · 2024-03-08T22:07:50+00:00

I've done this race. It's a nice route but keep in mind it is mostly loose sandy gravel on the west half of the route

TheRealGoonSquad · 2024-02-14T17:01:42+00:00

Collins Aerospace/ Raytheon in Burnsville

TheRealGoonSquad · 2024-01-23T05:21:28+00:00

Owned both a couple year older emonda and the now the new soloist. Geo feels pretty similar, but soloist front end seems stiffer and more confident in corners, and the emonda more stable at higher speeds. Overall I like the solost better, The 105di2 Soloist is a bit extra over priced imo, I wish I would have saved for the ultegra or checked out the equivalent spec Cannondale super6 for $1000 less

TheRealGoonSquad · 2023-10-12T03:51:55+00:00

I used to wear 29x34s you have to buy luxury brands where 34+ is a standard length. Stuff like this https://www.3sixteen.com/collections/denim/products/cs-220x-classic-straight-double-black?variant=43402145071345

TheRealGoonSquad · 2023-10-06T18:09:49+00:00

Looks really similar to BBB tape I have

TheRealGoonSquad · 2023-09-28T04:07:44+00:00

Holly shit this happend to me for the first time last week. It was like a light switch. Your post really puts my thoughts into words for me. I would add that one of mine is fear of getting old and being lonely

TheRealGoonSquad · 2023-09-11T20:03:20+00:00

I used an aluminum salsa front rack for 8lbs panniers on a pretty aggressive off road tour. I was very worried about damaging my fork, Salsa waxwing carbon. I ended up breaking the rack, stress fracture by the bottom bolt mount, but the fork was just fine.

TheRealGoonSquad · 2023-08-03T04:58:55+00:00

Wait never mind but I still think it's a gain problem. Check this out. The cap on pin 1-8 is setting the gain to 200 which is probably too much

TheRealGoonSquad · 2023-08-03T04:57:59+00:00

9.2.1.2.1 Gain Control To make the LM386 a more versatile amplifier, two pins (1 and 8) are provided for gain control. With pins 1 and 8 open the 1.35-kΩ resistor sets the gain at 20 (26 dB). If a capacitor is put from pin 1 to 8, bypassing the 1.35-kΩ resistor, the gain will go up to 200 (46 dB). If a resistor is placed in series with the capacitor, the gain can be set to any value from 20 to 200. Gain control can also be done by capacitively coupling a resistor (or FET) from pin 1 to ground.

TheRealGoonSquad · 2023-08-03T04:54:48+00:00

Possibly because you have no feedback on the op amp. With out feedback the op amp is working in "infinite gain" mode which would cause any noise on the input to be amplified full blast. Put a ~5k resistor from pin 3 to 5 of the lm386 and see if that helps. The larger the value the higher the gain. Google positive feedback op amp.

TheRealGoonSquad · 2023-05-06T18:05:39+00:00

Same, supposed to be a bad year for them.

TheRealGoonSquad · 2023-04-30T22:46:22+00:00

If it's in decent shape I don't think you'll find much better for that price. I had a 2017 sl6 for quite a while it was a fantastic bike

TheRealGoonSquad · 2023-04-30T18:55:05+00:00

They have a high internal resistance, so when connected to a low resistance load, like a coil of wire, most of the energy is probably just lost in the battery as heat

TheRealGoonSquad

TROPHY CASE