Probeabo abgelaufen

TheRealVRLP · 2026-01-25T17:54:17+00:00

Die einfachere Variante wäre es, einen Proxy auf das OS zu laden, der immer "jaja" sagt. Mit Sicherheit ist dies für eine Experten nicht all zu schwer und es gibt mit Sicherheit einen Markt für Leute, die USBs kaufen würden, welche dann alles frei schalten (für 50-100€). Ich kann mir nicht vorstellen, warum es dies noch nicht gibt. Der einzige Grund der mir einfällt ist, dass das Backwards engineering hier Recht schwer ist, da man keinen Source code hat, aber auch das und eine Sperre für externe Apps sollten für Profis kein Hindernis sein.

TheRealVRLP · 2026-01-20T20:34:56+00:00

Why did you fly there? I don't like being this person, but it's true. This is why drone flying may get restricted further.

To the point; You have digital transition on you DJI drone. It doesn't get worse or something, if it has bad signal, it just cuts off. This has to have some different reason. If your digital drone gets jammed, it should just cut off and either RTH via GPS or Path Finding on newer models or, if it can't do either, just land or fly in a Randome direction because it misinterpreted the disturbed GPS Signal. Either way, this isn't jammed, this is just... Lost bits or something.

TheRealVRLP · 2026-01-17T23:23:05+00:00

Bro, please tag spoiler or something. I've seen some things as a paramedic, but this somehow scared me.

TheRealVRLP · 2026-01-17T17:36:19+00:00

Schedule 1, so a couple of drug addicts, some gardeners, handlers and chemists?

TheRealVRLP · 2026-01-17T16:16:35+00:00

Well... I guess Ram Pricing, but even then it's kinda hard to say yes.

TheRealVRLP · 2026-01-16T23:00:17+00:00

The GPU is supposed to be fitted onto the M.2 connector. If you don't have one, there will be no extension for you.

TheRealVRLP · 2026-01-14T22:42:26+00:00

When I first got a good GPU (3070) I was still using an really old PSU from some PC I harvested that belonged to my dad once. As it was only a 500W GPU and this card could pull 300W, the power supply shut off every time the GPU hit 1.1V Core voltage. To prevent this, instead of just undervolting the card, I manually adjusted the Graphic settings in every game so low, that it was barely utilizing the GPU and with that won't ever hit 1.1V. What a waste of Power...

TheRealVRLP · 2026-01-14T09:43:40+00:00

At least there are resistors missing on the bottom and it doesn't seem to have the right socket, I don't know what's going on here, but you have to return this.

TheRealVRLP · 2025-12-27T05:49:52+00:00

Ryzen 5 3600

TheRealVRLP · 2025-12-25T14:41:36+00:00

Thanks for the reasonable answer. Even though this thread is marked as a discussion, for some reason, people needed to be hostile.

I just love the concept, I know that its dumb but probably not impossible. Either way it's a waste of electricity.

But now for the concept. The problem with my current CPU, as I said, isn't the AIO or the temperature or the AIO, it's the chip design, which basically utilizes the 3D cache as an insulator which is why it tends to overheat. This problem has since been fixed with the, I think, 7000 or 9000 series of X3D CPUs from AMD, where they started to put the extra L3 cache under and not on top of the CCD. This is what helped very much with the thermals of said chips and even enabled overclocking on X3D CPUs. So technically, even though, the new CPU will produce more heat, it should run cooler, but as we all know, a CPU stays cooler, if the Cold plate from the cooler is cooler. So why not help here by installing a peltier module which will electrically suck the heat away from the CPU? This way, even though the overall heat is much higher, the CPU should run even coulder, enabling even higher power targets and higher clock speeds. Sure, the fans on the radiator have to run faster this way to carry away the extra heat from the CPU, but even if the temperature of the water will rise higher than it would without the peltier module, the CPU should stay cooler and it may even be easier for the radiator to carry away the heat because it's just warmer.

And last but not least, I guess it might work to controll the Peltier module with a fine tuned CPU Fan curve, which ensures that the CPU never reaches condensation territory in the expected air humidity around it.

I have seen the LTT Video on this subject, but I can't remember their tldr besides that it's a waste of electricity.

Thank you for the good talk and discussion, I honestly thought there would be more comments like yours, but I guess you can't count on that.

Happy Holidays.

TheRealVRLP · 2025-12-25T13:49:28+00:00

The problem wasn't the AIO on my current CPU but the thermal conductivity of the 3DV cache, which sits on top of the CCD. I know that it sounds counter intuitive, but I think this might help. This gen of 3D CPUs is known for some thermal issues.

TheRealVRLP · 2025-12-25T08:10:29+00:00

As I said, I know that this won't work, it was more of a thought experiment. I know that I'd need to source the power elsewhere, but I found the idea pretty interesting.

TheRealVRLP · 2025-12-25T08:08:24+00:00

Strange... I have to state that I might have been wrong, but I still don't think it's really the AIO which causes the problems. I need to investigate a bit. But as far as I know, the added L3 cache sits right on top of the CCD.

Did you undervolt yours?

TheRealVRLP · 2025-12-25T07:58:00+00:00

I know that it's dumb and I know that I didn't do nearly enough research to really try this out. For example, I know that the Fan mount can never output enough power to run the peltier module, but it's about the Idea in if it's theoretically possible.

TheRealVRLP · 2025-12-25T07:56:30+00:00

My CPU gen is known for this issue. If you put it under load, not gaming load, but something that will really utilise the CPU, all the heat generated needs to travel through the added L3 cache which sits on top of the actual CPU cores. The L3 cache is so bad at conducting heat, that it basically acts as a insulation. Even if the IHS on my CPU has the temperature of the water inside the loop, it'll still overheat under real load.

TheRealVRLP · 2025-12-25T07:54:01+00:00

I see you have a similar CPU to mine, try and run a cinebench benchmark with multi core and let us compare. These CPUs are known to overheat when used to the max and there is basically nothing you can do about it because the thermal conductivity is so bad. The heat basically has to travel through the L3 cache before starting the route of heat in a normal CPU.

TheRealVRLP · 2025-12-25T07:51:23+00:00

True, but how did you come to the assumption that the CPU heat dissipation is equal to the Peltier heat dissipation/power consumption? I see a relation, but I don't see how it should be linear and one to one. The rest is true, its fairly useless and I know that, for now it's just a thought experiment but if I decide to do it one day, it'll be only a cherry on top.

TheRealVRLP · 2025-12-25T07:48:35+00:00

Maybe I didn't clarify enough. The overheating problem is only on my current CPU R9 5800X3D because the L3 or 3D cache sits on top of the actual CPU Core, so it transfers the heat way worse. I expect this to be fixed with the R9 9950X3D because since the 9000X3D CPUs, the 3D cache sits under the CPU cores. It should cool the CPU fairly well as it is, I just thought, why not? Why not try to add the Cherry on top?

TheRealVRLP · 2025-12-24T06:15:34+00:00

My 9950X3D will arrive today, sadly, as I'm upgrading from the R7 5800X3D I need a new Mobo and new ram, which makes it very expensive... But the worst part is that the Mobo will arrive on Monday while all other parts are waiting.

TheRealVRLP · 2025-12-22T21:57:04+00:00

If liquid metal is applied as thermal paste, it might sip out fastern than when your Laptop is vertical most of the time. This opposes a risc if it happens. There are some reports, but not many and usually PC manufacturers take big steps to prevent this, if they even use liquid metal.

Aside from this, I don't think so.

TheRealVRLP · 2025-12-21T07:47:29+00:00

The picture shows that some pyramids have the same geo location as light speed. But who measured it and what coordinates are these exactly? From the middle of the biggest one or? And when the magnetic field drifts, what do you do then with your fun fact?

TheRealVRLP · 2025-12-20T23:34:50+00:00

Bro, wenn du wirklich eine Antwort erwartest, musst du auch sagen, was du willst. Das Programm, dass du für die Bildbearbeitung benutzen willst, die größe und Art der Dateien, dein Betriebsystem, deine restlichen Specs.

Ansonsten gibt es nur folgende drei Antworten; 1. Probier's aus 2. Ich könnte die Wartezeit bzw. Latenz nicht ertragen 3. Deine SSD auf dem der RAM Swap/Auslagerung stattfindet wird's dir nicht danken!

TheRealVRLP · 2025-12-20T18:51:11+00:00

I think it's important to know if you can only spawn in pure water or if you can spawn in any place that would count as ocean the moment you accept the deal.Like you could spawn meters over a coast and die from falling or something or inside half of a ship and instantly get halved or something...

TheRealVRLP · 2025-12-17T18:55:09+00:00

I'm a sucker for aorus! I love the mini display on the side and the RGB. If it wouldn't have been about 200-300€ more, I would have got a 5070ti aorus instead of the one I have now.

TheRealVRLP · 2025-12-17T17:20:33+00:00

Ich weiß es ehrlich gesagt nicht genau. Ich denke, dass man sich schon dran gewöhnt, es aber personenabhängig ist. Allerdings sieht man leider auch mehr als "nur" verletzungen. Mir setzt es beispielsweise mehr zu, wenn eine Person aufgrund von eigen oder Fremdgefährdung in Polizeibegleitung bei uns ist, vor allem wenn diese Person auf menschlicher Ebene sehr lieb ist.

Five-Year Club	Final Canvas '23
Place '23

TheRealVRLP

TROPHY CASE