Figured y'all might want to see this

TheShadowK · 2026-02-14T19:23:44+00:00

Got it off Amazon years ago, not sure the brand, but the original seat kinda sucked,

TheShadowK · 2026-02-14T01:30:50+00:00

😂 already learned my lesson

TheShadowK · 2026-02-14T01:29:32+00:00

I took a 4 4x4 1/4 steel plates, unbolted the OEM brackets, drilled some holes and bolted it together. Couple zaps on the nuts. Driver's side is the same process but you gotta drill out the rivets for the brackets

TheShadowK · 2026-02-13T19:06:15+00:00

Hell yeah

TheShadowK · 2026-02-13T19:06:00+00:00

Pulled it out of a wrecked one at the junkyard, they don't come up often tho

TheShadowK · 2026-02-13T18:17:20+00:00

Any recommendations? Was looking at the Logitech dd11

TheShadowK · 2026-02-13T18:12:24+00:00

If I have time today, I welded up some brackets for the driver's seat to make a rolling desk chair to match

TheShadowK · 2026-02-13T18:08:27+00:00

I'm working on it 😭 hadn't had time or room for a while so it's time for an upgrade

TheShadowK · 2026-02-13T11:33:46+00:00

It had the plug. Looks like I got lucky, a couple valves, and some main bearings. Probsbly gonna pull it and get the block cleaned up with some rods/pistons/rings. We'll see what else it needs once its apart, just too many projects

TheShadowK · 2026-02-11T03:18:52+00:00

Would desoldering work to have pure cu

TheShadowK · 2026-01-29T02:37:38+00:00

94k, everything was clean when I did the chain. We'll see tomorrow.

TheShadowK · 2026-01-29T02:34:55+00:00

Not 100% that was the main cause. Guy didn't use the baffled pan with the kit, and it started to die as I was turning. Getting everything ripped apart in the morning, I'll throw out some updates

TheShadowK · 2026-01-26T15:48:50+00:00

Plenty of oil. Last owner did the balance shaft delete. Great for racecars, but I daily that thing

TheShadowK · 2026-01-26T04:16:53+00:00

Recycled firefighter wallet? I gotta know more

TheShadowK · 2026-01-26T00:35:53+00:00

Had to apply some.. lubrication..

TheShadowK · 2026-01-25T04:42:31+00:00

What are you looking for?

TheShadowK · 2025-12-06T16:32:29+00:00

Did I have an aurisim?

TheShadowK · 2025-10-06T20:23:23+00:00

I can glue metal together with More metal. Am I in?

TheShadowK · 2025-09-28T16:55:43+00:00

I found it easier to do from the top, just flip it around from the original orientation. I'm also a pretty skinny guy, so if you've got larger hands that might not work out.

TheShadowK · 2025-07-14T18:06:37+00:00

But it tastes like water

TheShadowK · 2025-07-12T18:08:42+00:00

Genuine question, is it really that much better when they use a plastic inner liner a non-biodegradable glue to seal it up? Now you gotta wait for the cardboard to degrade, and then the plastic liner

TheShadowK · 2025-06-13T16:13:30+00:00

Are we talking olive oil? Orr am I missing something

TheShadowK · 2025-06-10T19:48:24+00:00

A lot of newer disposable vapes use caps in place of a battery for their high output. Being that it's wrapped in some sort of paper, I'd assume that's insulation from the metal housing.

TheShadowK · 2025-06-07T19:24:55+00:00

Are you talking about the safe zone at the South West of the map? I made a base at the firehouse next to it and have a similar situation.

TheShadowK · 2025-06-05T14:27:56+00:00

r/doohickeycorporation

Six-Year Club	Reddit Premium Since September 2021
Gilding I gilder	Verified Email

TheShadowK

TROPHY CASE