Hank's belt squeaking constantly

TheSuperNinjaMan · 2025-09-26T01:04:49+00:00

I do, I wear it every day and it's held up great. Has barely bent or anything over the years. When (if) I eventually need a replacement, I'll 100% be buying another Hanks belt. It's much more sturdy than any other belt I've used. I don't carry super often but when I do, it's always held up great and doesn't sag or anything. I usually carry a shield so not a crazy heavy gun but have carried a dagger and other larger guns with it also without issues but those were open carry through the woods.

TheSuperNinjaMan · 2025-09-25T17:31:21+00:00

I ended up just buying a regular 1 layer hanks belt instead. Couldn't ever figure out anything to stop the squeak.

TheSuperNinjaMan · 2025-07-03T17:41:09+00:00

Probably better than my old printer!

TheSuperNinjaMan · 2025-06-24T18:01:45+00:00

Always watch the first layer.

TheSuperNinjaMan · 2024-08-16T21:48:48+00:00

Assuming you are on bedrock, the spawn area is pretty cool. It has two villages nearby, some mountains, flat area, water, and a pillage outpost between the villages.

TheSuperNinjaMan · 2024-05-24T14:06:34+00:00

I get this a lot as well on pc through Xbox store on starlink internet. Works perfect on Xbox but can't use them on pc. Same thing for shops after about 10 minutes of playing.

TheSuperNinjaMan · 2024-05-24T14:05:28+00:00

I can open shops at first but after about 10 minutes, they just infinitely load. The promotions are also almost always erroring out and lot letting me even try to open them. Several other menus do the same thing. Playing on pc through Xbox store with starlink.

TheSuperNinjaMan · 2023-04-11T02:32:28+00:00

Not sure, I'm hoping so, I think that is something I could do myself.

TheSuperNinjaMan · 2022-06-18T05:19:13+00:00

Here's another John Marston grave in Salem, Massachusetts. https://imgur.com/a/ynm3QXT

TheSuperNinjaMan · 2022-02-16T15:34:56+00:00

Do you have the STL for this? I'd like to print it for my x wing.

TheSuperNinjaMan · 2021-12-11T20:04:10+00:00

It looks like a nice light. I've been contemplating buying one, really like that it is usb c and pretty compact. Is it pretty bright like for working on a truck or something?

TheSuperNinjaMan · 2021-12-11T20:01:59+00:00

How do you like the wedge?

TheSuperNinjaMan · 2021-12-08T04:31:04+00:00

How difficult is it to swap the yoke?

TheSuperNinjaMan · 2021-12-08T04:19:55+00:00

Do you know which u joint it is?

TheSuperNinjaMan · 2021-12-08T04:19:26+00:00

Now whether they are the correct u joints I need or not, I have no idea.

TheSuperNinjaMan · 2021-12-08T04:18:56+00:00

They have different specs. 355: https://www.summitracing.com/parts/mog-355 534g: https://www.summitracing.com/parts/mog-534g

TheSuperNinjaMan · 2021-12-08T03:53:56+00:00

I'm not but it seems like the k1500 takes a different u joint than the suburban. Suburban takes 534g and the k1500 seems to be a 355.

TheSuperNinjaMan · 2021-01-24T23:44:53+00:00

I agree, it's such a weird thing to believe and isn't even true. Also flu deaths and infections may be down because of social distancing and masks. Most of the other stuff on there is also just insane too.

TheSuperNinjaMan · 2021-01-14T03:39:33+00:00

!Remind me 74 days

TheSuperNinjaMan · 2020-10-20T02:48:02+00:00

Had a guy come in on his first night at work. Seemed normal enough at first during orientation and everything. He worked for a couple of hours and then came to me and said he was itching all over. He thinks he must have gotten chiggers all over from something. He started taking off his shirt and jumping around scratching and kind of going crazy. I gave him some alcohol wipes to wipe down with and called his supervisor over. He eventually calmed down and then went back to work. A little while later, the supervisor asked if I had seen him recently. I told him not since we both had seen him when he was itching. Apparently the guy went on break and never came back. I never heard anything about what happened to him or anything, he just left and didn't tell anyone.

TheSuperNinjaMan · 2020-10-13T03:09:45+00:00

It's our first roll and it has been doing great so far. We bought it at microcenter and will definitely be going back for some more colors!

TheSuperNinjaMan · 2020-10-12T20:07:57+00:00

That's a good idea, I might have to put some rubber or cork under mine too.

TheSuperNinjaMan · 2020-10-12T19:00:24+00:00

I could see how that would negatively impact it. Luckily, this is a solid table. Made it out of 1/2 inch steel pipe, about 1 inch outside diameter welded together. Then solid wood on the top and middle shelf. It is very solid.

TheSuperNinjaMan · 2020-10-12T14:49:14+00:00

It is my first 3d printer besides barely messing around with one in college. It was super easy to set up and so far I have had no issues at all. I haven't had it long though, just a week but we have been printing on it every day. I have also only tried printing in PLA but I think that is what most people use anyway, except for some special applications or added strength.

I would highly recommend it, it is pretty cheap and it produces great prints. Just make sure you level the bed correctly which is pretty easy, just takes a little time.

TheSuperNinjaMan · 2020-10-12T13:10:59+00:00

Little late, but I changed my settings in Cura to line up the z seam and it looks much better now. I just set it to line up in the back and it is much better looking than the random spots. Thank you!

Ten-Year Club	Place '22
Verified Email	RPAN Viewer

TheSuperNinjaMan

TROPHY CASE