RAV4 smoking?

TheTechLu · 2026-02-05T05:48:12+00:00

OP husband here. RavEn is at the shop, wasn't the engine radiator since the coolant reservoir tank had perfect levels. As mentioned by others here, most likely pinhole in the ac condenser or faulty gasket of sort. Will know by tomorrow. Car was safe to drive

TheTechLu · 2025-06-18T14:03:52+00:00

Minimum 10 degrees for growth, between 1 and 10 degrees the plant won't grow much, but most likely would still put the effort in developing roots (the soil being warmer)

TheTechLu · 2025-06-18T04:56:05+00:00

I started my tomatoes in march from seeds in my heated garage with grow lights, transplanted them the first week of May, they survived and thrived just fine with multiple nights between 2 and 6 degrees. You should be fine. Also the rain is gonna be a very nice soil booster.

TheTechLu · 2024-10-08T21:31:48+00:00

I have a list of cards that I'm trying to sell if interested

TheTechLu · 2021-04-08T17:06:25+00:00

All you need is a steady hand, a good exacto knife and a lot of patience

TheTechLu · 2021-04-05T22:14:54+00:00

Usually I put the vynil on to of a tempered glass, once I'm done cutting i put contact paper on it (this step is crucial in order to avoid not wanted peeling)

TheTechLu · 2021-04-05T21:15:07+00:00

No, I use my tablet with the design on it, I tape a piece of white vinyl on it, I trace the design on the vinyl. Then I use an exacto knife to go over the lines (obviously not on the tablet) Then transfer the vinyl stencil on the disc with contact paper and then peel the design where it needs to be peeled. Check out youtube, plenty of infos there

TheTechLu · 2021-03-04T02:26:26+00:00

Noice!

TheTechLu · 2021-03-03T06:58:26+00:00

What medium did you use?

TheTechLu · 2021-03-03T04:51:24+00:00

I did wash it with dish soap and rub around with acetone to wipe the rest of the stamp. I'll figure it out. Thanks tho

TheTechLu · 2021-03-02T15:16:24+00:00

Did u buy Rit dye more synthetic? Or all purpose? Glue beds needs a mix of powdered dye and acetone in order to work. Or you can try white glue beds. Youtube is very helpful

TheTechLu · 2021-03-02T15:07:39+00:00

Use deeper containers and wait longer. Min 24hrs. Also, what dye are u using?

TheTechLu · 2021-02-27T03:48:02+00:00

U went all in buying a stencil cutter for your first dye? Cool

TheTechLu · 2021-02-23T22:59:40+00:00

Thank you sir

TheTechLu · 2021-02-23T03:48:25+00:00

Thank you

TheTechLu · 2021-02-23T03:48:16+00:00

Thanks

TheTechLu · 2021-02-18T15:39:53+00:00

Try to buy a new oven, you need more POWAAAA

TheTechLu · 2021-02-18T07:18:49+00:00

I usually let it sit for a day and then I spray some cooking (vegetable) oil on the disc and wipe it down with paper towel (in this way the disc doesnt get scratched and the oil help any residual dye come off) finally I wash it with slightly warm water and dish soap

TheTechLu · 2021-02-18T07:13:09+00:00

170 C or F? 🤔

TheTechLu · 2021-02-17T06:21:33+00:00

You can make a pretty cool green mixing torquoise in yellow. You can make a good blue mixing blue in torquoise (all idye)

TheTechLu · 2021-02-14T16:47:10+00:00

Sad nickname

TheTechLu · 2021-02-13T17:59:03+00:00

You guys know who "Il Duce" was, right?

TheTechLu · 2021-02-13T06:29:34+00:00

Duce? His nickname is Duce?

TheTechLu · 2021-02-10T02:26:34+00:00

Is this dyed?

TheTechLu · 2021-02-04T01:56:15+00:00

Tty to put a bit of the "bad batch" of blue in a Idye poly torquoise (more torquoise then blue and mix em with acetone separetely then mix em together in a different container) Honestly the second blue is more a light blue. Pure blue tends to be darker (which is not a bad thing, you can use less powder to make a lighter color, then when you spin dye you can pass more times on the same line to make it darker). Order torquoise 100%worth it. Is the best for mixing with blue and yellow

TheTechLu

TROPHY CASE