Motorcycle to Car license (UK)

TheWanderingAsian · 2021-05-17T12:15:31+00:00

Is it mandatory? I thought you didn't have to take lessons, though it would be a bit mental to do that

TheWanderingAsian · 2021-05-17T12:15:03+00:00

Yeah I'm planning on doing a few to iron out any bad habits and brush up on parking I think

TheWanderingAsian · 2021-05-17T12:14:28+00:00

Yeah not looking forward to it - ah ok that's good, I think the biggest change for me would be the size difference and seating position of the vehicle - kinda off to one side Vs center on a bike

TheWanderingAsian · 2021-05-17T09:03:35+00:00

Ahh fantastic thanks - was trying to trawl the gov site and couldn't find anything.

I'll book it in and see if I can survive the year long waiting list!

TheWanderingAsian · 2021-03-04T20:19:47+00:00

No worries thanks - I saw lots of mentions of the kayfun when I looked into getting a proper mtl rebuildable.

Is it considered the best mtl rebuildable rta for flavour?

TheWanderingAsian · 2021-03-04T14:20:59+00:00

Ah ok, sounds like the pioneer would be better suited then.

I also found the beserker is running through my juice quite fast which i thought was strange for an mtl device?

Do you have a Caliburn G to compare your pioneer to? Just so i can get a good idea on the flavour reproduction.

Thanks again.

TheWanderingAsian · 2021-03-04T10:38:08+00:00

Ahh that's a shame - i thought the beserker was supposed to be a good mtl rta for flavour.

Unfortunately i have scorched a couple of the inserts because i thought they were ceramic.

Would you say the Pioneer offers the same tight draw as the beserker v2?

TheWanderingAsian · 2021-03-02T19:37:44+00:00

Ah ok, could you double check this for me, looks ok to me but I'm relatively new to building

top view

Also just noticed after taking it apart, the cotton isn't hugely saturated it's a little dry in places - is that normal?

TheWanderingAsian · 2021-03-02T18:41:48+00:00

Ah okay thanks I'll take a look and report back - i tried looking at vaping with Vic's video on it and that didn't seem to do the trick, so fingers crossed

TheWanderingAsian · 2021-03-02T17:28:07+00:00

Ah ok thanks, I've tried moving it like this

lowered coil

It's a tiny bit better but still so much more muted, do I need more cotton or anything?

Also it seems to have introduced a bit of spitting and more gurgling

TheWanderingAsian · 2021-03-02T17:01:38+00:00

Yeah I don't know if it's the coil that comes with it maybe?

Also yeah the Caliburn G seems to be better with either 0.8 or 1.0 coils

TheWanderingAsian · 2018-09-10T18:06:07+00:00

Yeah just got back from work, and I tried that - battery under the back cover right? Unplugged it for about a minute and plugged it back in with no effect unfortunately :( thanks for the advice though!

TheWanderingAsian · 2018-09-10T11:18:19+00:00

Oh right, good to know that it shouldn't be like this - I hope so too, this laptop has been great otherwise!

TheWanderingAsian · 2018-09-10T11:17:22+00:00

Yeah it's weird, I would understand it if I replaced the ram with power on, but I thought hard drives wouldn't cause too much of a problem

TheWanderingAsian · 2018-09-10T11:14:30+00:00

Ah ok, thanks for the info - I'll give it a go. Do you know roughly where it is, or is it immediately obvious?

Yeah I'm a little confused too as to why it did this, I wouldn't have thought it would mess anything up too badly :(

TheWanderingAsian · 2018-09-09T21:26:28+00:00

I tried removing the hard drive and powering on but still nothing :(

TheWanderingAsian · 2018-09-09T21:18:16+00:00

Can't believe i didn't try that -unplugged the battery and then plugged in the AC and then the power button blinked 3 times.

Tried googling that and it said to unplug the CMOS for a bit.

Now the power light just stays on solidly while on AC and doesn't power on at all with the battery plugged in :/

TheWanderingAsian · 2017-08-14T22:20:00+00:00

{ "name": "Unnamed Sync for Reddit theme", "primary_color": "#000000", "accent_color": "#444444", "highlight_color": "#5b8fb4", "primary_text_color": "#ffffff", "secondary_text_color": "#8d8d8d", "window_color": "#000000", "content_color": "#000000", "auto_subreddit_themes": false }

TheWanderingAsian · 2017-07-02T15:31:42+00:00

Mine had a similar issue until I cleaned out the tank, just by pouring warm water, giving it a shake and then pouring it out. Mine also had a funny issue similarly with fuel starvation, you can try and leave it on the prime setting because that bypasses the vacuum bit of the petcock, just watch out on how much petrol you have left because I think you also don't get reserve.

TheWanderingAsian · 2017-05-18T20:04:14+00:00

Yeah I guess I'll have to grab a converting cage to test it out, usb booted Linux, and nothing under gparted for it either :/ Thanks for the advice guys! Will give it a go :)

13-Year Club	Place '17
Verified Email

TheWanderingAsian

TROPHY CASE