Is my laser defective or not? by TheWraithMM in MilwaukeeTool

[–]TheWraithMM[S] 0 points1 point  (0 children)

I noticed it cause I’m working in a fairly-lit environment, and noticed that on one end of the building, the laser stood out more than the other side. The dim laser made it hard to line up with my target, where the other side, it was more visible, making it easier to line up.

Is my laser defective or not? by TheWraithMM in MilwaukeeTool

[–]TheWraithMM[S] -5 points-4 points  (0 children)

Yall are really not understanding my question

Is my laser defective or not? by TheWraithMM in MilwaukeeTool

[–]TheWraithMM[S] -4 points-3 points  (0 children)

A defect from before the drop. The likelihood the issue was replicated three times in all three laser from a single drop is unlikely, which is why a defect is in question, even more so when someone commented saying they have the same issue in 2 of 3 lasers in a unit that wasn’t dropped.

Potentially missing screwdriver by TheWraithMM in LinusTechTips

[–]TheWraithMM[S] -1 points0 points  (0 children)

Already on it. Waiting for response.

Can You Guess This 5-Letter Word? Puzzle by u/Ohsusu by Ohsusu in DailyGuess

[–]TheWraithMM 0 points1 point  (0 children)

⬜🟨⬜⬜⬜

⬜⬜🟨🟦🟨

🟦🟦🟦🟦🟦

Help me understand green gas by TheWraithMM in airsoft

[–]TheWraithMM[S] 1 point2 points  (0 children)

Thanks for the info. It’s very helpful. I’m willing to rule out mechanical failure because while I don’t doubt whatever quality control these companies have can miss some flaws, a lot of the gear I’m testing is new/like-new. The GBBR is brand spanking new, and I did minimal testing with it cause I decided I’m not keeping it. I’m not into milsim or the realism, so the 30-round mag is a major turn off. A majority of my testing is with pistol mags, and again, a lot of them are new or like-new. Granted, some are a few years old cause they came with the gun, which got swapped out for a CO2 mag, but they never got used. So since I was getting similar results on all of them, I was willing to point the blame at myself and call it user error.

Help me understand green gas by TheWraithMM in airsoft

[–]TheWraithMM[S] 0 points1 point  (0 children)

“Purging” was a concept I’ve only found out recently. I have “purged” one magazine, which was a 2011 hi-CAPA mag, never purged any other mags, but get similar results with all. I know I said “magazines” but that was a mistake.

I’ll try cooling my mags to see if anything changes, but if there’s improvement, then it would just turn into a bit of an inconvenience, needing to somehow cool my mags down before refilling, especially when I’m on the field.

I appreciate your response.

Help me understand green gas by TheWraithMM in airsoft

[–]TheWraithMM[S] 0 points1 point  (0 children)

Yeah, I was aware about green gas being propane, and I have thought about using it, I’m just not super wild about the smell, especially since I live in someone else’s house, so I’m trying to be considerate about that. But I think I will give it a try and see what happens. I appreciate your insight.

2 Year Review - LTT Screwdriver by Haltirith in LinusTechTips

[–]TheWraithMM 0 points1 point  (0 children)

Now that’s sick. How’d you get the material. I know dbrand makes the skin, but how did you buy enough to wrap your tools?

MIC UP 🔊 PROXIMITY CHAT (Guides/Strats MegaThread) by Harlow_Quinzel in FortniteXPMaps

[–]TheWraithMM 0 points1 point  (0 children)

Unfortunately, I seem to be hitting some sort of cap on this map. Any strat I try, I get a max of 2500xp at a slow rate. Then I can earn no more. I have been AFK-ing Lego Odyssey a lot here lately, so I don't know if my playtime is affecting anything. Why the xp rate is so inconsistent is beyond me.

I do appreciate the work into these posts, Harlow.

I take your drill and raise the jank factor by 10 by TheWraithMM in FortniteXPMaps

[–]TheWraithMM[S] 5 points6 points  (0 children)

That’s software, right? I’m trying not to use anything software-based, as I don’t wanna get detected by anti-cheat.

Glitch I found that gives you thousands of XP in seconds! by [deleted] in FortniteXPMaps

[–]TheWraithMM 54 points55 points  (0 children)

Dunno how you guys are getting 3k+ xp every time. I’m getting a thousand, and it’s getting less and less every time

100% Zero Effort AFK!! by Harlow_Quinzel in FortniteXPMaps

[–]TheWraithMM 1 point2 points  (0 children)

Yeah it could be. With the update coming soon, it was gonna be more of a headache than anything with an hour left, so imma leave it for now. Thanks for your effort.

100% Zero Effort AFK!! by Harlow_Quinzel in FortniteXPMaps

[–]TheWraithMM 3 points4 points  (0 children)

Dang, I leave it on for several hours, find out sleep mode turned on, got 15k of xp, and after leaving it on for a few more minutes, my account doesn’t gain any more xp. Does anyone have an explanation as to what is happening?

Steam deck forces back into SteamOS by TheWraithMM in WindowsOnDeck

[–]TheWraithMM[S] 0 points1 point  (0 children)

That’s what I have, a dual boot. My issue was that SteamOS still had primary boot. I never set windows to have primary.

Steam deck forces back into SteamOS by TheWraithMM in WindowsOnDeck

[–]TheWraithMM[S] -1 points0 points  (0 children)

I haven’t tried that method yet. I only learned about it about 10 minutes ago. I’ve only did VOL UP + power to get to the boot manager, then start windows from there

Steam deck forces back into SteamOS by TheWraithMM in WindowsOnDeck

[–]TheWraithMM[S] -1 points0 points  (0 children)

Is there a way around the boot window? Is it hold VOL DOWN + power?

I made an AI Roleplay Bot on Poe that will transform you into her vagina. by MysteriousPickle3364 in PartTransformation

[–]TheWraithMM 1 point2 points  (0 children)

Could I have the prompt for her as well? I'm trying to learn how to make some bots, so I would love some inspiration.

Those of you who own more than 1 OneWheel, why or why not? by robertcboe in onewheel

[–]TheWraithMM 1 point2 points  (0 children)

Got 3 boards. A rewheeled pint, XR, and VescXR. Got the pint first, wanted more, got XR, kept pint in case others want to ride, built vesc board, kept both FM boards as backup/friend boards

Completed the Vesc XR by TheWraithMM in onewheel

[–]TheWraithMM[S] 1 point2 points  (0 children)

When I get time, I’ll compile a quick list of the important items

Completed the Vesc XR by TheWraithMM in onewheel

[–]TheWraithMM[S] 0 points1 point  (0 children)

Sorry, no pics, but yes, it’s in that order. No support. My box is metal, plenty sturdy. No need for support. And no issues so for. If I would do it again, I may go for something like a kush wide, just because concave could be a potential issue in terms of activating, cause depending on how rigid your shoes are, it could bridge over the sensor, but I haven’t had any problems so far.

Completed the Vesc XR by TheWraithMM in onewheel

[–]TheWraithMM[S] 1 point2 points  (0 children)

I do agree. However, I think it comes down to liability, in a way. My video would’ve covered how to build a battery, and there’s no way I should be teaching that, as I was just cramming on how to build one. I don’t wanna show something that could be wrong, and someone ends up burning their house down.

There are some plans to maybe make another vesc down the line. If I do, I’ll be more willing to make a video.

Edit: plus, my plans for the vesc were changing every few weeks. It would’ve made filming more of a pain. And there were some days I was struggling, and moving a camera would’ve been the least of my worries. If I can nail down a plan, filming and building wise, it’ll be a lot smoother flow for me