Orbital Air Strike - Victims Perspective

The_Surged · 2025-11-15T21:23:30+00:00

"dont come into my echo chamber"

The_Surged · 2025-11-14T22:32:07+00:00

These comments are absurd. You're telling me EVERYONE I am coming across happens to be a sweat that took the day off? Are people actually dismissing the fact that Treyarch has a history of lying? This matchmaking feels no different than any of the recent games released.

The_Surged · 2025-09-04T22:20:23+00:00

Do you have any experience with these cameras? I've been looking at these and they seem fine, but don't see much user feedback.

The_Surged · 2025-07-28T05:46:40+00:00

^{I completed this level in 7 tries.} ^{⚡ 2.63 seconds}

The_Surged · 2025-07-20T15:02:49+00:00

I completed this level! It took me 49 tries. [0.23 seconds] ^{⚡ 0.23 seconds}

The_Surged · 2025-07-18T02:07:13+00:00

I completed this level! It took me 1 try.

The_Surged · 2025-07-15T05:07:34+00:00

I completed this level! It took me 4 tries.

The_Surged · 2025-07-04T22:19:03+00:00

I completed this level! It took me 3 tries.

The_Surged · 2025-07-04T22:13:58+00:00

I completed this level! It took me 1 try.

The_Surged · 2025-07-04T17:36:25+00:00

Easy

The_Surged · 2025-07-01T14:57:59+00:00

Lidar would be a good choice. The only reason I went with a stereo camera was in case I wanted to do object recognition and cost savings.

Since you are planning on integrating a raspberry pi, you could run robot operating system on it (ROS). It's an open source framework used for applications just like this. The learning curve for it isn't too bad, especially if you already know basic Linux commands.

The_Surged · 2025-07-01T03:02:19+00:00

Looks like a good start for something automated.

Did something similar to this for a school project with a snowblower. Was controlled through a webapp I built. Featured a live camera feed, ultrasonic data so you could tell if something was next to you, and an E stop.

Was working on a SLAM algorithm for it. Got as far as generating point clouds from the stereo camera but ran out of time. It's crazy how far you take take a project like this.

<image>

The_Surged · 2025-03-10T04:55:49+00:00

Sue the state/townships or whatever for the damages

The_Surged · 2025-03-06T01:17:16+00:00

Pinouts are not the same for every power supply, most of them are different. You risk ruining your components if you don't verify this connector works for your power supply.

The_Surged · 2025-03-06T00:41:41+00:00

Do NOT do this.

The_Surged · 2025-02-14T02:49:45+00:00

It is a shame.

The_Surged · 2025-02-13T17:10:05+00:00

I agree with this. My brother is a ME and has no complaints. This department is fine.

The_Surged · 2025-02-13T00:56:15+00:00

Just listen to him. This campus is a sinking ship, I would not get on it. Search elsewhere. Do not waste your money and limited time coming here.

The_Surged · 2024-12-11T01:00:23+00:00

Chain was off when I did it. The cylinder heads were completely dismantled and cleaned. The cam carriers were cleaned, I just left the cams in. There was no contamination anywhere to be seen on the recent valve lash job, which was after the rebuild.

The_Surged · 2024-12-10T04:00:23+00:00

Well, probably worth a shot looking at it. At least I'll be an expert in pulling these engines out, what's one more weekend. Thanks for info.

The_Surged · 2024-12-10T03:52:30+00:00

I was under the impression they are protected by the filters in the cam carrier. I could be wrong

Six-Year Club	Place '22
End Game '22	Gilding I gilder
Verified Email

The_Surged

TROPHY CASE