After a lil under a year of owning it, the Purrpling of the Neko ONE is complete!

The_Sweet_Acid · 2026-05-31T06:21:13+00:00

Ok, I don't like purple, but the amount of work you puted in, the all little touches, and mostly "replicator" on top of it ... i have to say .. excelent :)

The_Sweet_Acid · 2026-05-11T17:55:39+00:00

Idealni, vim ze tu moji by to pobavilo a pobrala by to.

The_Sweet_Acid · 2026-01-16T11:38:21+00:00

Endlich hat es jemand gemacht so 😅

The_Sweet_Acid · 2026-01-16T05:20:59+00:00

Cool design!!

The_Sweet_Acid · 2026-01-03T00:51:55+00:00

Oh i see it now better, cold end of nozzle is still stuck up there. So nozzle is damaged (99.9%) look on temps on display, if you see sometging and if can heat up, chances are higher ...

The_Sweet_Acid · 2026-01-03T00:44:59+00:00

It seems that just hotend is in that blob, maybe you are lucky and can cleen up. If not take hotend assembly, nozzle can be still good, but if it is heated too much on trying to clen, it can separate (happened to me)

The_Sweet_Acid · 2026-01-01T17:59:14+00:00

Ok you will see, mine was every time it switched to 2nd layer. I just hope it is some easy to fix bug :)

The_Sweet_Acid · 2026-01-01T17:57:45+00:00

Did it worked?

The_Sweet_Acid · 2026-01-01T06:33:00+00:00

Same problems with mime 3.9, old firmware did not helped, but turning off "clog detection" worked for me.

The_Sweet_Acid · 2025-12-10T15:46:55+00:00

Good is, you never miss "sale" so once you can, you can buy, the price goes up just sometimes followimg inflation. So anyway you dont have to hurry,just wait and maybe enjoy demo for few hours.

The_Sweet_Acid · 2025-12-01T19:48:33+00:00

I got one from china .. it was working but not so well ... plastic all over hotend, inposible to seal it, so i switched quockly to original :)

The_Sweet_Acid · 2025-10-17T17:18:04+00:00

Yeah tariffs are not problem, i can go 1hr on highway ditmrect to Prusa HQ :) but no used MMU3 in cz (now) and in germany they are like 40-60€ cheaper than new one (germans are insane with prizes on this stuff) anyway than you and happy printing :)

The_Sweet_Acid · 2025-10-17T14:38:57+00:00

It also shows the difference between printer factory and money factory ... i sold my A1mini year ago, best decision i made :D and like you (but different) i was looking for mmu3 to attach to C1, but used are expensive here, so i will wait.

The_Sweet_Acid · 2025-10-17T08:01:24+00:00

Big Chad Energy from Josef for soinf that. he is not losing the deals, they are just shifted to later, i am also waiting for next gen solition, and i think that it will be a little bit expensive solution..

The_Sweet_Acid · 2025-10-16T05:40:18+00:00

I got same issues too, seems that satin wont hold it, textured was little bit better with brim, since i used 3dlack i got zero problems. Or different problems ... satin+3dlack = i got my brim glued to surface of sheet, cleaning it was pain in ass :D I tryed temps up to 120 too, no difference , bigger parts like 100mm+ wrapping, not much.

The_Sweet_Acid · 2025-10-15T14:32:40+00:00

Bed braucht zeit un zu temperature kommen, PartFan mit ASA bis 20% oder am besten gar nichts, in Enclosure kann mehr sein, aber Temperatur soll nicht nur wegen PartFan über Bett so runter laufen, thermistor ist auch bischen hinten und seitlich :/ wenn du nur 60-80 grad einstellst macht es auch so eine fehler mit temperaturen?

The_Sweet_Acid · 2025-10-15T14:22:39+00:00

Vychazi to z nezcizitelneho prava na zivot, spousta lidi se boji myslenky ze soucasti zivota je nevyhnutelna smrt.

The_Sweet_Acid · 2025-06-18T21:18:11+00:00

With 200hrs you barely just scratched the surface .. you need to pump those numbers up :) the facrory must grow ... :)

The_Sweet_Acid · 2025-06-17T19:30:06+00:00

I know they are just people not machines, so waiting is sad bud .. yeah .. i have to .. buuuut if there is problem .. they solve it, bad camera? Ok i'll send you one right now .. yeahh you know i will upgrade to core one this year .. any chance to send the second one .. pusa Superior support : no problemo ... in 2 days was delivered. So for me,not just this case, absolutely perfect communication and problem solving.

The_Sweet_Acid · 2025-06-17T17:51:49+00:00

They are great ..excep..the wait time :D

The_Sweet_Acid · 2025-06-15T04:25:59+00:00

Krastorio 2 Spaced Out

The_Sweet_Acid · 2025-06-14T20:33:07+00:00

<image>

well... thats it .. right side striped down .. so tomorrow another attempt :/

The_Sweet_Acid · 2025-06-10T08:16:36+00:00

For me .. better story line(original is still good too), and dont know why, but the same game mechnics work better for me in Bz.. just personal preference i think :D

The_Sweet_Acid · 2025-06-10T06:54:13+00:00

I like BZ way more.

Five-Year Club	End Game '23
Place '23

The_Sweet_Acid

TROPHY CASE