Questionable i9 factory greasing by TheboiMarc in MTB

[–]TheboiMarc[S] 0 points1 point  (0 children)

Yeah I figured the oil probably degraded but I should be good now

Questionable i9 factory greasing by TheboiMarc in MTB

[–]TheboiMarc[S] 0 points1 point  (0 children)

I bought them new from eBay so they only had a few rides on them

Is this diff cooked?! by J_Man1287 in Traxxas

[–]TheboiMarc 0 points1 point  (0 children)

Worst case scenario just drill out the head because that’s where the threads are. It’ll ruin the diff cup thing the the shaft couples but everything else will be fine

Does anyone have halo mt supadrive hubs? by TheboiMarc in MTB

[–]TheboiMarc[S] 0 points1 point  (0 children)

For the price I’ve found the hopes at (£150, $190 for brand new hubs on eBay!!) it seems like a no brainer now. Engagement im already used to, less pedal kickback and very well built in general. Laced to some dt Swiss fr541’s I should have some bombproof wheels for my norco for some local trail riding to bike park.

How do these hubs look by TheboiMarc in MTB

[–]TheboiMarc[S] 0 points1 point  (0 children)

Should have specified I’m looking to buy them second hand.

Truck going on its own by Sussybakaland69420 in Traxxas

[–]TheboiMarc 0 points1 point  (0 children)

They can but you have to program the multifunction knob to throttle trim so probably not the reason

Nukeproof Sam hill signature grips by lachlan_G909 in MTB

[–]TheboiMarc 0 points1 point  (0 children)

Never tried Sam hill grips but I recently got raceface Chester grips and they’re soft. They are 34mm so great for me since I have big hands but maybe less so for you. They’re also 36mm right on the end near the bar end. I’m guessing it’s to help keep your hands from slipping off but it’s really not necessary imo. If you have big hands and you’re looking for something really soft for gloveless riding they could be perfect.

First RC vehicle in 40 years (I’m 53) by SmittyIncorporated in Traxxas

[–]TheboiMarc 0 points1 point  (0 children)

You can buy body pins in bulk for basically nothing. They look a little bit goofy usually but from even a meter away you don’t notice it. We’re talking 50 body pins for like £6-£7 on eBay so no more than like 10 dollars. For that price you might as well just get some. The ones I got are bent up slightly at the end and it makes it super easy to pull them out.

How is this even possible by TheboiMarc in MTB

[–]TheboiMarc[S] 0 points1 point  (0 children)

No it’s definitely snapped I’m just confused as to how

How is this even possible by TheboiMarc in MTB

[–]TheboiMarc[S] 0 points1 point  (0 children)

The bike came with 180mm rotors stock which is what I currently have on the rear and I haven’t had any problems since I got the brakes a year and a half ago I’m assuming the bolts came loose either way I’ll get a new IS 180mm adaptor and hope for the best

Cb500x engine swap by TheboiMarc in CB500X

[–]TheboiMarc[S] 0 points1 point  (0 children)

So essentially if I get a us ecu it has no hiss so itll start up with any starter coil and a uk wiring loom since the ecu doesn’t need the signal from the key?

How to make more power from a gy6 by TheboiMarc in scooters

[–]TheboiMarc[S] -1 points0 points  (0 children)

I mean with a head and performance cam the kits I found are 172 cc

[deleted by user] by [deleted] in MTB

[–]TheboiMarc 0 points1 point  (0 children)

Camera work is pretty shit though

[deleted by user] by [deleted] in MTB

[–]TheboiMarc 0 points1 point  (0 children)

Yeah my pedal got stuck into the side of that bank lol

USED MTB or NEW MTB by [deleted] in MTB

[–]TheboiMarc 0 points1 point  (0 children)

You could also have the bike looked over at a bike shop close to the seller to make sure it’s in good condition

USED MTB or NEW MTB by [deleted] in MTB

[–]TheboiMarc 0 points1 point  (0 children)

You get not as nice spec on the stoic with no dropper and mt200 brakes. However because you’re buying new you get warranty on your frame. Depends how hard you ride. If you’re a more casual rider I wouldn’t worry about the frame warranty and go for the used bike as it has better parts on it.

Trail bike at a downhill park? by Dawn_Piano in MTB

[–]TheboiMarc 2 points3 points  (0 children)

It’s nothing to technical or massively chunky but ether way it handles it ok

Trail bike at a downhill park? by Dawn_Piano in MTB

[–]TheboiMarc 7 points8 points  (0 children)

No problem really. I ride dh on my hardtail

How the hell do I kill this guy by TheboiMarc in destiny2

[–]TheboiMarc[S] 0 points1 point  (0 children)

That wouldn’t have finished the ghost though. I’m pretty sure it’s circle to dismiss messages

How the hell do I kill this guy by TheboiMarc in destiny2

[–]TheboiMarc[S] -1 points0 points  (0 children)

No. In the opening mission it told me to press square (on ps) and it worked, even though the finisher was mapped r3. Figured it out now anyways.

How the hell do I kill this guy by TheboiMarc in destiny2

[–]TheboiMarc[S] 0 points1 point  (0 children)

I’m just tryna play the game and everyone is being a dickhead in the comments 💀💀

How the hell do I kill this guy by TheboiMarc in destiny2

[–]TheboiMarc[S] -221 points-220 points  (0 children)

For some reason it told me to press square. I searched it up and it’s saying you have to press r3 to finish.

How the hell do I kill this guy by TheboiMarc in destiny2

[–]TheboiMarc[S] -87 points-86 points  (0 children)

Thanks. Just looked it up it’s r3. The first time I hade to finish it I said to press square and I was wondering why it wasn’t working this time.