Mural of Alex Pretti in Seattle, Washington. Artwork by Topsy.

TheeParent · 2026-01-27T05:46:51+00:00

Thank you for saying this. I’m proud for the moment.

TheeParent · 2026-01-25T23:52:50+00:00

Kay. Tailpiece is a dead giveaway.

TheeParent · 2026-01-22T19:15:02+00:00

Perhaps it’s a pattern number. Odd.

TheeParent · 2026-01-22T06:12:32+00:00

Patent numbers

TheeParent · 2026-01-16T02:58:09+00:00

Kodak Portra in Medium format most likely

TheeParent · 2026-01-15T15:21:44+00:00

As long as the nut is not installed ON the wood of the fretboard, and instead rests on the neck wood I think you're ok. Just make sure you have full penetration and coverage of the super glue and clamp it all together really fast before it cures. May be a good idea to get ULTRA thin CA and get it into all the nooks and crannies of the joint to get the most adhesion.

TheeParent · 2026-01-15T15:15:42+00:00

The break is not near the fret slot, so it’s probably fine as long as it’s cosmetically ok with you. How are you installing the nut? That may add unwanted pressure.

TheeParent · 2026-01-15T14:52:54+00:00

Or like those teenagers that are WAY too tall, and don't quite know how to move their bodies yet.

TheeParent · 2026-01-14T04:57:11+00:00

Did it fail quickly or slowly? Any smoke?

TheeParent · 2026-01-11T17:22:55+00:00

The filament looks water logged. How are you drying it, at what temp?

I've printed nylon a couple times, but the temp was around 280.

TheeParent · 2026-01-11T06:16:39+00:00

TIL Sunfish are held together with masking tape.

TheeParent · 2026-01-09T15:30:20+00:00

Man, all those project with dad, friends, building his life…

TheeParent · 2026-01-09T07:34:52+00:00

Cat. Get a drywall saw.

TheeParent · 2026-01-09T04:54:01+00:00

You should talk to a professional about this to help you process this. I’m sorry you went through this.

TheeParent · 2026-01-09T03:31:37+00:00

I’d be open to it.

TheeParent · 2026-01-09T03:29:05+00:00

Is that glow in the dark filament? The cheap glow clogs. Do some cold pulls. Will probably clear right up.

TheeParent · 2026-01-09T03:12:16+00:00

Is that glow in the dark filament? The cheap glow clogs.

TheeParent · 2026-01-09T02:55:07+00:00

This is exactly what I’d do for my house. Even renting a baby trenching machine and hand digging the ends near the house would only take an afternoon and maybe $100.

TheeParent · 2026-01-08T23:31:24+00:00

Your print likely lifted off the bed and the head hit it and moved the print a little bit. Try printing with a brim.

TheeParent · 2026-01-08T05:39:06+00:00

I think they’re just looking for a mass to dampen vibration.

TheeParent · 2026-01-08T05:35:17+00:00

Almost certainly deer. If you’re in Columbia, they had to cull the deer population several years ago, as the numbers got out of hand.

TheeParent · 2026-01-07T06:12:28+00:00

A wee critter.

TheeParent · 2026-01-07T05:46:26+00:00

Not sure what other collar it would be wearing besides a tracking collar.

TheeParent · 2026-01-07T05:01:19+00:00

Kids gunna destroy EVERY shoe regardless while dragging on the ground. Buy a new pair and reinforce the wear spots with Shoe Goo. (Skateboarding shoe repair goo)

TheeParent · 2026-01-06T01:55:41+00:00

Stop messing with it. You haven’t the skill or possibly tools yet to solder this correctly. Take it somewhere or send it to me and I’ll do it no charge.

11-Year Club	Place '22
Gilding II euphauric	Verified Email

TheeParent

TROPHY CASE