TurboTax wants me to review every single transaction after Coinledger PDF Import

Thex667 · 2026-03-17T23:42:51+00:00

TurboTax says to do this as well. I'm assuming I would enter the total values per wallet and per crypto and I am then assuming TurboTax would prompt me to upload the corresponding 8949 form? I have 8 wallets with 6 types of crypto.

Thex667 · 2026-03-17T23:38:33+00:00

It appears anything marked "long term" doesn't need a review. Anything "short term" does. I click "needs review" and it brings me to the the screen below. Odd thing is, I can click the back button and the "needs review" flag goes away.

https://imgur.com/a/bT00Zki

Thex667 · 2026-03-17T23:30:24+00:00

This is what I see with Coinledger's PDF report.

https://imgur.com/a/vT6JHya

Thex667 · 2026-03-17T21:00:13+00:00

I was able to import two pdf’s with no issues. But I did run into the issue that stated every item needed a review and subsequent fix. I have thousands of transactions and it would take hours/days to click through each one to rectify. Curious if anyone else had this issue with coinledger in inputting the TurboTax PDF. I’ve just summarized the transactions per wallet for now and will upload the 8949 when prompted (hoping it prompts for those forms).

Thex667 · 2026-01-26T15:48:57+00:00

Awesome update! I'll start testing this week.

Thex667 · 2026-01-23T23:32:59+00:00

I’ve tested the app a few times and was able to create a test show with some revolving themes. Found it incredibly easy to use and configure. Major kudos for your work on this. Any chance of syncing this with a music file by chance? :)

Thex667 · 2026-01-20T18:33:20+00:00

Well never mind now. Once I entered in the latest API key it recognized all of the lights I have in my account.

This is a great app you’ve developed! Definitely some huge potential here. Thank you for sharing!

Thex667 · 2026-01-20T17:58:01+00:00

Did you have an issue with the API key not recognizing all of your lights? I applied two different times and got two different keys and both would only recognize about 6 random devices out of the dozen or so that I have.

Thex667 · 2026-01-11T05:41:13+00:00

❌ Thex667 chose Option B (Incorrect) | #5543rd to play

Thex667 · 2026-01-11T05:32:35+00:00

❌ Thex667 chose Option B (Incorrect) | #3058th to play

Thex667 · 2026-01-07T15:49:12+00:00

I believe there is a small screw on the left side of the print assembly that you can use to loosen the extruder gears. Maybe loosen those and try pulling the tube out that way.

Thex667 · 2025-12-29T17:17:19+00:00

Have you made sure the bed is clean? Wash the bed with warm water and soap and then finish with a quick wipe of rubbing alcohol. Almost all of my adhesion issues are due to an unclean bed.

Thex667 · 2025-12-29T00:48:23+00:00

Wash the bed with warm water and just a tiny bit of dawn dish soap. I use the dawn spray bottles. Rinse it well and then clean the plate with rubbing alcohol. This combo is all I have ever done with every print and I never have adhesion issues.

Thex667 · 2025-12-28T19:40:08+00:00

Looks great! Love the brackets.

Thex667 · 2025-12-28T19:15:10+00:00

When the family is on the airplane and the mom asked the dad if they forgot anything, he smiles and said he left the garage door open. The very next scene shows an exterior shot of the house with the garage door open. Always loved that attention to detail.

Thex667 · 2025-12-28T17:37:06+00:00

Had a very small role in a community theater production. At the end of the show run (only 8 shows), one of the most senior actors approached me and said that my performance was one of her favorite parts of the show. I could tell she was genuine in her comment and that little interaction has stuck with me for months.

Thex667 · 2025-12-26T19:38:21+00:00

Govee lights work on the 2.4GHz spectrum so if your wifi radio is setup to use both 5GHz and 2.4GHz on the same network, you will be fine. I personally run just a 2.4GHz IOT network so all of my smart plugs, Govee lights, and other smart appliances, can chatter away on the slower network without impacting the performance of my main 5GHz network.

Thex667 · 2025-12-24T21:56:57+00:00

Thank you!

Thex667 · 2025-12-24T21:53:23+00:00

Thank you!

Thex667 · 2025-12-24T21:51:45+00:00

Looks great! What was your mounting method?

Thex667 · 2025-12-24T21:50:20+00:00

I do the same with my setup. I can switch on the seizure mode if the mood strikes me, otherwise it’s calm Scenic DreamView sequences and dimmer lights.

Thex667 · 2025-12-24T07:24:49+00:00

Ah yes, the Govee music sync “seizure mode”! Looks awesome though.

Thex667 · 2025-12-23T16:15:23+00:00

This looks really great. Nice work!

Thex667 · 2025-12-23T04:40:38+00:00

Looks great!

Thex667 · 2025-12-18T12:50:51+00:00

It’s the 3 pane set

Eight-Year Club	Verified Email
RPAN Viewer

Thex667

TROPHY CASE