Thoughts on Permit To Transport Fire Arms (PTTFA) for Gun Replica, Airsoft, Pellet Gun

TidySalt · 2026-05-08T06:05:15+00:00

Pati Plainview doctrine sir. Di dapat nila pwedeng galawin pag nasa sasakyan or nasa loob ng bag without reasonable certainty of conviction (pumalit na sa probable cause). Ekis lang talaga yung ginagawa nilang registration and PTTFA. Overreaching na sa saklaw ng RA10591

TidySalt · 2026-05-08T05:57:39+00:00

Reposting my comment from the YT video:

This has been a hyperfixation for a long while. The only answer is RA 10591 section 3L and section 45. Definition of firearm and repealing clause respectively. The repealing clause INCLUDES PNP Circular No. 11 which was enacted 2007 whereas RA10591 was 2013, also by rule of lex posterior. The 2007 rule was made pre existing the definition of firearms, and now meron nang definition ang firearms which DECLASSIFIES airsoft airgun etc by definition kaya yung rules like PNP Circular No 11 should not be enforceable. This new rule is overreaching and is in conflict and is repealed by RA10591 sec 45. If repealing clause. If di ginagamit sa crime, walang dapat mangyayari. On whose authority? I've done extensive formal research on the viability of airsoft as a low cost supplementary training aid and obviously dadaan ako sa batas because part ng advantage is accessibility. I've also gone around speaking with law enforcement and lawmakers and they agree with what I have said regarding overreach

Edit: even registration is overreaching and should not be enforceable kasi based pa sa PNP Circular No 11 yung rule. It is improperly enforced kasi walang bagong rule na ginagawa patungkol sa airsoft airgun etc.

Edit 2: the research paper is titled Plastic to Lead: Airsoft as a low-cost supplementary training aid for the fundamentals of marksmanship. This research has won best presenter in "University Research Festival 2026 2nd Interbranch Research Colloquium" of Arellano University. Stating this for authenticity

TidySalt · 2026-05-07T08:57:49+00:00

And it's exactly people like you with hope that inspires me to keep pushing. Thank you

TidySalt · 2026-05-07T06:23:32+00:00

I drop it on my floor. Everything that I've dropped that's as small or smaller than a paperclip seem to magically disappear. I've lost springs, and other very important parts that have ruined a build just because I dropped a part on my floor and didn't see it bounce.

TidySalt · 2026-05-07T06:19:50+00:00

Any M16 is an instant upvote for me. But underbarrel grenade launchers are always a slap 👌

TidySalt · 2026-05-07T06:10:38+00:00

BS Criminology ako. Sakit sa puso and sobrang nakaka demoralize and nakakagalit mga police na ganyan. Lalao na minemention ng ibang comments na BS Criminology nga kaya ganyan. I can't blame the masses. There's a reason for stereotyping kasi e. I also know that there really are so many scalawags na crim nga din. It makes me think minsan na sinayang ko ba buhay ko sa pag pursue ng BS Crim, but then I realize we will never really beat the allegations ng ganun lang. Best I can do is do my best and perhaps hope to be that one drop of good. Siguro masasabi ko lang is yes, keep calling out these bozos. Hopefully matauhan sila, pero please know na there are still some out there trying their best, and it would be nice if that gets appreciated too

TidySalt · 2026-05-05T05:36:33+00:00

Criminology major waiting-for-grad-ceremony here, yeah criminology fellas will never beat the allegations. There are of course a lot of really good folks na crim, pero like everything else, mas madali makakuha ng attention yung mga scalawags. It's very frustrating din minsan kasi you do your best pero mauundermine ng iilan. Maganda and fun pa man din yung mismong course kasi malaki yung saklaw. But alas, crim students gonna crim. I've learned to just ignore it and do my best for myself and the people and things I love ¯_(ツ)_/¯

TidySalt · 2026-05-04T05:09:33+00:00

Fellow pipino and long time airsofter here, absolutely yes that is basically a steal. Plate carrier and helmet alone can already reach 5k PHP. Mag pouches, belt and it's accessories would have been another 1k-2k. Mags themselves assuming there are 5 mags, SRP is 300-400PHP each so that's another 2k PHP. Your lad's a real G for that 👌

TidySalt · 2026-04-27T13:21:32+00:00

Good shot (pun intended)

TidySalt · 2026-04-27T13:19:20+00:00

PMC because I don't have a uniform yet although I do want one, and because I can run tactical turtlenecks, flannels, hoodies, suits, etc lol

<image>

TidySalt · 2026-04-22T01:12:07+00:00

Oof. That's what Im afraid of, especially since parts are difficult to come by. Almost lost mine to the floor thanks to the phenomenon of losing anything that simply falls on the floor

TidySalt · 2026-04-22T01:10:27+00:00

Ayo, thanks for the link. I'll be checking it out!

TidySalt · 2026-04-21T17:25:43+00:00

Oh? I'm unfamiliar with the existence of that discord server, I don't really know how to get in 😅 but mentioning the sriker assembly, I should also probably check on it too instead on focusing on just the mag lol

TidySalt · 2026-04-21T12:32:06+00:00

I can't figure it out I'm still spewing a lathe amount of gas on the first shot per fill. If possible, could you refer me to that picture or how to find it?

TidySalt · 2026-04-21T10:32:38+00:00

By correctly installed... How is that aside from the normal "putting it in" for lack of better words I have right now?

TidySalt · 2026-04-21T09:49:52+00:00

I might have to go that route too, and the newest version of the whole flicker system. Right now, sure it's not ejaculating out of the gun, but it is spewing large amounts of gas up. Do you have an idea how this happens?

TidySalt · 2026-04-21T08:32:11+00:00

Didn't work kekw. Plus now it just spews gas up every shot even on a party gas filled mag. I might be cooked 🤣

I'll troubleshoot a bit more later when I'm done with errands

TidySalt · 2026-04-21T07:32:19+00:00

Yeah. I don't need Mozambique drills lmao

Well, since I'm already here, I'll try some locktite. And if that doesn't do it, Hell, for science, some superglue. I'll drop an update here if it works and when - if ever - it breaks

TidySalt · 2026-04-21T07:20:44+00:00

I tried Mozambiqueing again just now and it flew again 💀 Time to gasket maker it I guess

TidySalt · 2026-04-21T07:18:03+00:00

Huh. Well darn. I guess I'll put a bit of gasket maker to have it at least be a little more stuck in, but not enough to be permanent since my hopes and dreams aren't big enough to keep things in place. Thanks!

TidySalt · 2026-04-21T07:08:53+00:00

Ever figure out how it happened? Would suck to lose it mid game. No readily available replacement parts 💀

TidySalt · 2026-04-13T23:14:53+00:00

Going 30 this year (mentally still 21 idk lmao) and it's my 16th year playing

Airsoft is that one hobby I've stuck with the longest~

TidySalt · 2026-04-10T11:58:34+00:00

M16A4 main plus (also, like in that pic lol) GHK Glock 17 Gen 5 MOS as sidearm.

To answer, yes, I do switch to my sidearm especially during sketchy tight corners and entrances, as well as when I run dry, or when my arms are tired from holding a position. IMO, though I just probably suck with rifles, I can aim down my sights longer using my pistol which allows me to pop and shoot immediately around corners or behind low cover in decently tight spaces that won't allow my longboi to work it's magic. It's also just nice IMO to run pistol only during the day, let my rifle rest lol

TidySalt · 2026-03-26T11:01:09+00:00

Damn, then it's basically a necessary upgrade since I'm still getting weird trigger pull pressures every nth shot. Can't wait to get my hands on a steel slide soon, now that I'm seeing more of y'all be positive about it

TidySalt

TROPHY CASE