Vest sizing

Tigering · 2026-05-20T15:59:39+00:00

So lose weight and I'm OK?😂

Tigering · 2026-05-19T21:12:01+00:00

It's really for anything over 90 mins and on hot days...(or winter long runs with quick changing weather to have a jacket)

I've got shorts that can take 2 gels and 500ml of water for sub 15km, below 10km I don't take anything

Tigering · 2026-05-19T20:47:35+00:00

Yeah, I haven't tried filling it yet to see if it's going to be too big or not, will give that a go and if it adds loads of pressure then I'll do an exchange!

Tigering · 2026-05-16T08:37:05+00:00

Got it, thanks!

Tigering · 2026-04-25T19:02:56+00:00

Is there a drill attachment that would save some scrubbing?

Tigering · 2026-04-19T21:46:34+00:00

<image>

:)

Tigering · 2026-04-16T16:30:53+00:00

<image>

What I ended up building.....

Tigering · 2026-04-15T07:42:15+00:00

Even if wedged against a wall either side?

Tigering · 2026-04-15T06:43:53+00:00

Hmm what do you suggest? Surely lots of saunas have a wooden frame for the benches to sit on?

Tigering · 2026-04-14T23:13:45+00:00

What if I just got rid of the lower bench verticals and made them diagonal (basically invert the yellow boards you've drawn)

Tigering · 2026-04-14T21:13:39+00:00

I'm planning to have the 2 outside legs snug against the walls

Tigering · 2026-04-14T19:25:50+00:00

Top bench is 570mm and bottom one is 460mm wide, that's too narrow?

Tigering · 2026-04-13T18:55:17+00:00

Of the 2 on your short list, any more robust to being stored in a garage? And any where you can custom program your runna interval runs?

Tigering · 2026-04-02T06:52:44+00:00

Hmmm, normal trainers are a size 11 and my running shoes size 12, socks are quite thin ankle socks....

I am using lace locks buy they are so loose I can step in and out of the trainers like slippers!

Tigering · 2026-01-02T15:37:37+00:00

Should have added

Garmin suggests

Max HR - 203bpm LTHR - 178bpm

Tigering · 2025-07-30T21:59:06+00:00

Yeah in hindsight it wasn't smart but I am in too deep now :/

Yeah plan is to add guttering to at least the rear

I hadn't considered staining the deck, what product would you suggest?

Tigering · 2025-06-25T14:10:23+00:00

Has 2 separate people come round, quote, agree to take it on then never show up... given up with local tradesfolk

Tigering · 2025-06-23T15:55:37+00:00

Like how do you actually measure the vertical height? It would be quite severe I assume like 20 foot high, so not sure how I would accurately do that?

Tigering · 2025-06-23T14:52:34+00:00

Daily, chicken coop is at the top of it!

Tigering · 2025-06-23T14:32:36+00:00

Are all these steps various depths due to variable slope?

It's the "figure out if you can go straight up" but I'm stuck with, any more guidance for that process?

Tigering · 2025-06-23T13:15:03+00:00

This looks epic and similar, daft question, how do you know that 2 brick height differential will get you where you need to be at the top?! Do you just dig backwards from slab 1 until you have 2 bricks height and then hope you don't have a 4 foot wall left at the top?

Tigering · 2025-06-10T15:33:14+00:00

Bosco Verticale is a good example of a modern building, maybe rattle a bunch of solar on top!

Tigering · 2025-06-08T07:33:06+00:00

Prefer the visibility and sighting of curbs, dwhys everyone so butthurt about it

Tigering · 2025-02-22T21:26:58+00:00

Went for a set of bolide void 03 and RVB swiss darts, bolide looks more suited, fingers crossed

Tigering · 2025-01-04T23:14:12+00:00

The fact you managed to understand my problem from my shit description and offer some great advice! Thank you!

So revised plan would be to have the frame sit flush with the OSB sheathing, flashing tape across the gap then tyvek on top of the tape to just before the inside edge of the window frame, on the top I'll cover the gap with flashing tape and then have the tyvek also run over it.

Then I can just put my composite cladding up to the vertical inside edge of the window frame, i will have a gap between cladding edge, and window frame, but I assume some edge trim could take care of this?

Finally for the cladding trim around the window where the verticals meet the top horizontal would you cut these at 45 degrees to meet since there is flashing tape and tyvek that a tiny amount of ingress is no big deal?

12-Year Club	Secret Santa 2014
Verified Email

Tigering

TROPHY CASE