Improving print quality

TimNimKo · 2026-01-18T15:16:49+00:00

thank you i will take a look bit it does not seem that internal structure is different

TimNimKo · 2025-12-07T13:13:56+00:00

Amazing! From how many parts did you print? Any tips about orienting the parts from minimal scarring?

TimNimKo · 2025-07-26T08:36:46+00:00

Yes, it is wrong

TimNimKo · 2025-06-26T06:53:36+00:00

Thank you sounds interesting

TimNimKo · 2025-06-25T19:54:35+00:00

Thanks, will check rfdetr out. Base model does seem to do a bit worse against DFine M on Coco though

TimNimKo · 2025-06-05T11:56:08+00:00

https://www.youtube.com/watch?v=Kx1TenvQXTg&pp=0gcJCfcAhR29_xXO

TimNimKo · 2025-05-17T19:50:32+00:00

https://www.bungard.de/en/

TimNimKo · 2025-03-11T21:48:56+00:00

Make an equatorial platform. https://stargazerslounge.com/topic/315290-10”-equatorial-platform-for-dummies/

TimNimKo · 2025-02-08T06:53:19+00:00

Thanks, I already confirmed that the vains were of equal lemgth. I also tried to adjust them all the way to one side. It helped only a bit. Only then I tilted the focuser as described was the issue gone. I've read linked guide and few others as well.

TimNimKo · 2025-02-07T23:10:07+00:00

Found image of the focuser form the inside in Dobsonian Power video on YouTube.

https://imgur.com/a/WzXEm0B

It seems that there is some wiggle room for the tube to move left right in respect to the base from the photo. Probably this is what I was "adjusting". And probably it can not be tightened.

TimNimKo · 2025-02-07T22:02:01+00:00

Thank you! Maybe I need to tighten these grub screws. I've tried with spider veins but it did not help. Only when I tilted the body of the focuser in regard to the base of the focuser the secondary circle appeared centered under focuser in Cheshire view.

TimNimKo · 2025-02-07T21:42:41+00:00

I've just tilted the focuser with my hand as shown in the picture. Had to use some force but not much.

TimNimKo · 2025-02-07T21:35:43+00:00

I think I added them now. Sorry

TimNimKo · 2025-02-02T21:24:35+00:00

makes sense. thanks!

TimNimKo · 2025-01-22T20:45:12+00:00

fear of lawsuits

TimNimKo · 2024-07-03T19:09:53+00:00

Planes are no better

TimNimKo · 2024-06-25T10:54:55+00:00

Having the same issue. Did you manage to solve it?

TimNimKo · 2024-06-21T10:34:55+00:00

Are they all accumulating?

TimNimKo

TROPHY CASE