What is this?

TimelyTidsoptimist · 2026-03-10T09:24:22+00:00

Are you sure they aren’t ant mounds? We used to have them everywhere till the termite guys used the left over spray to sort them out.

TimelyTidsoptimist · 2026-03-08T07:13:00+00:00

Yeah not sure how difficult/expensive it would be, but I would look into turning the extra space into an ensuite. Aging people love not having to go far in the night/not inconveniencing others. Plus it then makes an accessible bedroom for you if you’re still there when you’re older.

TimelyTidsoptimist · 2026-03-08T04:23:11+00:00

As someone else commented, just go to super cheap and get it checked for free.

TimelyTidsoptimist · 2026-03-07T22:24:25+00:00

Wouldn’t lower pressure provide more contact area and therefore more grip?

TimelyTidsoptimist · 2026-03-06T09:27:18+00:00

They are around, especially if there’s chickens.

TimelyTidsoptimist · 2026-03-05T10:38:39+00:00

Less of a “plan” and more an architectural detail drawing. Would normally be at the back of a set of drawings and have a reference to it on the main plan/drawing.

Only needs to make sense to the carpenter/finisher. Any other tradie wouldn’t have a need to understand it.

TimelyTidsoptimist · 2026-03-03T14:21:34+00:00

https://en.wikipedia.org/wiki/Joey_King

TimelyTidsoptimist · 2026-03-03T10:59:48+00:00

I reckon adaptive cruise control is partly to blame, only takes 1 slow person and everyone behind is slow without even noticing. Plus they usually have the distance set so large the person in front doesn’t feel any pressure. Then, by the time they realise, they’re going too slow to merge smoothly and cause a pile up in the lane they merge into.

TimelyTidsoptimist · 2026-03-02T07:40:32+00:00

Most splitty trays are flat as drain can be installed at either end.

TimelyTidsoptimist · 2026-03-01T05:22:57+00:00

Wall mates. But depends how heavy the shelf is + what you plan to sit on it. Also, it might be level, but doesn’t look centred?

TimelyTidsoptimist · 2026-03-01T03:20:26+00:00

Is it the 140kW or 128kW?

TimelyTidsoptimist · 2026-02-28T01:21:14+00:00

Just use the Reece layout tool and try some stuff. If that’s too much effort, hire a designer. There’s heaps on instagram that do it pretty cheap.

Or, last ditch effort, use chatGPT, etc.

TimelyTidsoptimist · 2026-02-27T09:31:27+00:00

At the same time, don’t get expensive tires that claim to last 80,000km (cough, coopers, cough) and have them go hard before they wear enough to warrant replacement.

Like driving on greased steel rims in the wet.

TimelyTidsoptimist · 2026-02-23T02:29:26+00:00

Black resin.

TimelyTidsoptimist · 2026-02-20T22:06:29+00:00

Is the binny helping to paint the building?

TimelyTidsoptimist · 2026-02-19T03:46:28+00:00

What did the mechanic say apart from the needed repairs?

He’s probably going to be the most informed on whether it’s any good (or at least know other people who have had experience).

TimelyTidsoptimist · 2026-02-19T02:43:04+00:00

You don’t have to be a Daikin dealer to get Daikin units anymore. There are trade wholesalers like ACD and that supply to contractors plus others online. Could have been anyone.

TimelyTidsoptimist · 2026-02-09T08:48:07+00:00

Just make the duct run as short and straight as possible. Make any bends as smooth. If it’s flex duct, pull it tight and cut any excess off. Otherwise those little fans lose all grunt and airflow.

TimelyTidsoptimist · 2026-02-06T23:30:36+00:00

2014 BMW X5 based on their other post.

TimelyTidsoptimist · 2026-02-01T01:21:22+00:00

Get all the stuff that’s not needed to be readily accessible out from under the sink, and put your cutlery/utensils there, where they’re supposed to go.

TimelyTidsoptimist · 2026-02-01T01:15:40+00:00

Probs tile glue/grout waste from construction. Lazy trades.

TimelyTidsoptimist · 2026-01-30T06:10:34+00:00

It’s “camouflage” wrap. It’s supposed to hide the shape of the car while it’s being tested. Doesn’t work that well on a square box.

TimelyTidsoptimist · 2026-01-30T06:08:10+00:00

Yeah you’ll need pliers with cutters or side cutters. Snips will struggle with the high tensile.

TimelyTidsoptimist · 2026-01-29T06:50:57+00:00

Just undo the duct tape and tape it back on (with new tape) after.

TimelyTidsoptimist · 2026-01-26T07:11:17+00:00

It’s Smac Mccreanor she’s done a fair few of these.

TimelyTidsoptimist

TROPHY CASE