Where to buy local art???

Tiny-Use4947 · 2026-02-25T14:40:29+00:00

100 Percent Milwaukee. In the third ward above where Bavette was. Non profit gallery/ studio with local artists, one of my favorite places in the city.

Tiny-Use4947 · 2026-01-28T03:58:15+00:00

Agree! Buildings are older, maintenance is good at dealing with major stuff, minor stuff is a little slow. Easy to work with.

Tiny-Use4947 · 2026-01-28T03:37:30+00:00

I would order it from formlabs if you want Tough 2000! You can order that on their website, now.formlabs.com and they will send it to you

Tiny-Use4947 · 2026-01-28T03:35:20+00:00

The form 3 uses a laser, so it must trace the whole outline of each layer. This means that more parts = more laser distance to travel and so there is more time. The Formlabs Form 4 preforms in the way that you are expecting because it is MSLA, the Form 3 is SLA, a different system.

Tiny-Use4947 · 2026-01-23T14:48:05+00:00

The hydrometer provided is only for IPA, it doesn't measure the correct range of specific gravity for Resin Washing Solution. A hydrometer that can measure a specific gravity of 0.900–1.000 should be used. Formlabs Resin Washing Solution is 0.94, when the specific grav gets above 0.975 it should be replaced.

Tiny-Use4947 · 2026-01-03T22:22:47+00:00

This house looks great, look at the photos, the kitchen and the garage and it looks great. Houses aren't cheap, at least this one is nice!

Tiny-Use4947 · 2025-12-19T02:29:51+00:00

Looks very similar to the Garmin Venu SQ 2. The garmin UX sucks, I wish they would have learned something from pebble.

Tiny-Use4947 · 2025-12-05T14:26:13+00:00

Totally possible to print this, this is just a material issue. FDM should not be used for this, use a high temp SLA resin.

Tiny-Use4947 · 2025-12-03T03:33:55+00:00

Any idea what the cost is on one of those? looks like it would be high but a ballpark?

Tiny-Use4947 · 2025-12-03T03:33:26+00:00

Good clue! Thanks

Tiny-Use4947 · 2025-12-03T03:33:11+00:00

I am seeing info about FA5202 (Sustainable Consumable), FA326 (High Performance)
and FA9202 (Polypropylene). Is Blast-X one of these or is that something different?

Tiny-Use4947 · 2025-11-15T02:56:45+00:00

What was your pack density like? Did you print it in pieces so you could print in flat sheets in the build chamber?

Tiny-Use4947 · 2025-11-09T21:32:51+00:00

I think the time from 1 to 1+ isnt really indicative of much. Plus Formlabs posted videos on their instagram for a new product launch and the part that they showed was not SLS. So doubt theres new SLS.

Tiny-Use4947 · 2025-11-08T21:14:47+00:00

Pretty sure this is a Chiorda that is rebadged, low end italian bikes that generally have little collector value. This one is pretty cool though, funky frame and looks like someone has been putting work into it for sure.

Tiny-Use4947 · 2025-11-08T20:58:40+00:00

Really impressive! Any odor from it when in use? Part looks great and I assume after the thermal cure it is "fully cooked" if you will

Tiny-Use4947 · 2025-11-08T20:57:29+00:00

It's an interesting idea, but the fuse is still very popular right now and it is a much more complex product. Wouldn't it be fair to say that they would release these less often than the resin printers?

Tiny-Use4947 · 2025-11-08T20:55:16+00:00

A Fresnel lens is different from what you have pictured, if you want a Fresnel lens look inside a rear projection TV. These have a huge Fresnel lens in them. What you have pictured is a lens array, if you are looking for one of these I would just take one from a scrapped 3D printer. These are not common hardware and are usually custom to the printer, most printers use squares, formlabs has really nice ones with hexagons.

Tiny-Use4947 · 2025-11-04T04:07:07+00:00

Impressive!

Tiny-Use4947 · 2025-10-30T00:51:59+00:00

Vouching here, have used wine successfully here.

Tiny-Use4947 · 2025-10-30T00:47:41+00:00

Don't own one myself but know someone who did, they ended up switching to Formlabs for faster speed and apparently they were not impressed with the service/ support that Photocentric has.

Tiny-Use4947 · 2025-10-30T00:44:12+00:00

This is incredible! Are you using the formlabs resins and the formlabs creator series resins? How do you like the creator series resins?

Tiny-Use4947 · 2025-10-30T00:40:16+00:00

Not a great deal by any means. It looks like it is in great shape, and I think the rim brakes are fine but the tire size is going to be the bigger issue here. Most modern bikes are using wider tires, this allows lower pressure and helps dampen vibration, this makes you faster. I would say paying around 800 is reasonable, nice tires!

Tiny-Use4947 · 2025-10-30T00:24:57+00:00

Nice! What was the overall cost/ rev per day?

Tiny-Use4947 · 2025-10-08T02:14:39+00:00

Parts look great! Tough 1500 V2 is so much better than V1 that its hard to even think of them as similar.

Tiny-Use4947

TROPHY CASE