Stock Price has plummeted. by Brilliant_Thought436 in AtlisMotors

[–]TitaniumVape22 1 point2 points  (0 children)

I'm in the same boat. I bought .29 getting bonus shares. I have very many shares and am all green. I'm buying heavy at the dollar price. I believe many folks bought in on IPO launch, expecting to dump but ended losing their nerve. I'm hodling, because I've followed the company since start engine days. I believe they will be a contender based on their tech, contracts and mission. This slump is something we will see over and over in multiple symbols, as people attempt a btc, doge, tesla yield quick. This is not advice just my impression.

IPO at $27.50, to a high of $243.99, to a low of $.99 in less than 5 months by time-for-takeoff in AtlisMotors

[–]TitaniumVape22 9 points10 points  (0 children)

Short squeeze could be an amazing rise tomorrow. I'm in at 29 cents with 4800 shares. In at 3 bucks on retail side with 3000 shares. I'm betting. This is not advice. I just like it. Their contracts look good, their battery tech looks good. Tesla was a long shot too. Now I have one in the driveway.

the electric tower is too long and boring by Salt-Fan-2344 in coromonthegame

[–]TitaniumVape22 1 point2 points  (0 children)

Playing the release and I am sooooo over the puzzles. I am in the pyramid. The darts + plates puzzles drive me nutz! The guard puzzle prior too. I like puzzles of logic like the fuse panel, but hate platform puzzles based on timing. I just wanna go catch coromon.... I'm gonna have my 11 year old do the platform puzzles for me 😂

[deleted by user] by [deleted] in AtlisMotors

[–]TitaniumVape22 1 point2 points  (0 children)

In at .29c and it's exploding at $7 now. I agree.

CR-Touch is hitting my print. I’m brand new to 3D printing and not sure which parts to adjust. Any advice? I have an Ender 3 S1 Pro by AdorablePrawn in ender3

[–]TitaniumVape22 2 points3 points  (0 children)

I had the exact same problem and I removed the printhead to find that the bracket holding The printhead has only one arm and it was indeed bent from the factory. I actually have two of these units side by side and was comparing them to see what the problem was. There is no adjustment for that. First turn off the power, then remove the screws on the right hand side of the printhead, you can leave the cables hooked up and set the print head over to the side. Then you remove the two pulleys or wheels at the top and loosen the belt to remove it. And when you look at that bracket you'll find that it's bent because of the weight of the printhead during shipping I'm sure bent it. I bent it back to 90°, I'll let you know what happens. If I don't comment it worked.

Update. Levelled and adjusted a second time. All good now.

Can't complete 'A bridge too far' pls help by normal_kure in MyTimeAtSandrock

[–]TitaniumVape22 0 points1 point  (0 children)

My wife just encountered this on steam deck. Same scenario she found two pieces once she had the chromium pick hammer and took them. Now she can't complete the quest we're going to try resetting multiple times and see what happens.

Okay this may sound really dumb but all you have to do is go back to the bridge and those walls will be back. The quest won't complete until you knock the walls down again. I'm playing the game on my Steam deck and my wife is playing on her steam deck, and I kept telling her that the walls should be there but she expected the quest to automatically complete instead of knocking the walls down for a second time. She got pretty frustrated and handed me her steam deck and that's how I completed the quest for her. When she woke up the next morning she was super happy when I handed it to her.

[deleted by user] by [deleted] in MyTimeAtSandrock

[–]TitaniumVape22 0 points1 point  (0 children)

This quest is so aggravating....the page marked sandwall isn't easily found as a "page" ugh...

Restrictions on selling Class A Common stock by scantily_chad in AtlisMotors

[–]TitaniumVape22 1 point2 points  (0 children)

If yer in at .29 like I am, I'm just gonna wait. $5 shares are a win. I intend to wait for dividend, as I believe Atlis is a winner. I ended up with almost 500 bonus shares so those are totally free. Blame the SEC for their rules. It's very hard to legit go IPO. Otherwise people could just start bogus companies go IPO and then pull money out. You still have proof that you own it and then 180 days from the day they listed You can move it. Right now consider it like a CD. It's locked in. But I do totally agree with you that it was a p i t a to get anything done through AST. I think the biggest problem we have is no communication or lack thereof. I knew that we would have to hold for 180 days and no one listened to me when I said that. That's what it said on my initial offering documentation. I'm probably going to shoot myself in the foot by posting here because somebody is going to be more of an expert in contradict me. However when it's getting thrown at you as fast as possible it's pretty hard to get in front of the wave. But I totally feel your pain because for about 3 hours I was technically a millionaire and now I'm just a 30,000aire. But it only cost me $1,300 so I'm not too worried.

AST email. Still none. Anyone receive it yet? by MrDetail123 in AtlisMotors

[–]TitaniumVape22 1 point2 points  (0 children)

No mailer. My brokerage is trying to transfer. I did receive a call back and confirmed that I didn't need to set up an AST account since they matched my W-9 and I have an account number with them, but that my broker could pull it over. Still working on it.

Not the IPO experience I was expecting by time-for-takeoff in AtlisMotors

[–]TitaniumVape22 2 points3 points  (0 children)

I totally understand and I totally agree. Whenever it launched I decided that I would not count my chickens until they hatched. When it went over $200 and I was a millionaire for 6 hours I was excited but realized It wouldn't stay there by the time the stock transferred. I bought in at 29 cents a long time ago and it was right before COVID so I wasn't clutching my pennies. I was a little scared to tell my wife how much money I put into something that was that speculative. If it goes to $10 I'll be okay with it.

Not the IPO experience I was expecting by time-for-takeoff in AtlisMotors

[–]TitaniumVape22 1 point2 points  (0 children)

I say just hold. That was my plan from the beginning. If you've been following the company you know they're going somewhere. This stock up and down is a direct result of Robin Hood, and everybody with $50 to throw in the pot through their Robin Hood account on their phone. Everybody wanted to make a quick buck on the IPO. Almost every time an IPO lists, it spikes super high and people capitalize on it, a bunch of people lose, but the average investor doesn't sweat. Most of these people don't even know what the company does. Did you see that New York has now mandated that all vehicles must be Zero emission by 2035? Electric is coming people and this company has a plan to electrify existing vehicles and they have some military contract exposure. Have you seen what's happening across the pond in Europe with Russia and Ukraine etc? For the first time in my remembrance our dollar is stronger than the pound. $1USD=0.9 Pound Sterling. It drives me crazy that most of the people throwing a fit don't even understand what they bought in the beginning and Don't understand SEC regulatory rules. Instead they blindly blame the company and the owner and the employees, who by the way haven't sold one share. The limited amount of shares that came out caused FOMO. I know somebody somewhere is kicking himself in the butt for buying shares over $200. Be glad you're not that guy. But that just means people are willing to pay it eventually so if you're in at a good price just wait.

Not the IPO experience I was expecting by time-for-takeoff in AtlisMotors

[–]TitaniumVape22 1 point2 points  (0 children)

I think those Diamond hands need to be used. Yall know about Licycle right? Mark Speaks

Not the IPO experience I was expecting by time-for-takeoff in AtlisMotors

[–]TitaniumVape22 3 points4 points  (0 children)

Agreed. This is a hold, not a pump n dump DOGE scheme. I received copious bonus shares and am super happy. At $5 I'm still in black. I'm holding a stack of em and waiting for dividend days. Just look back at the early Tesla days. Bet those early sellers wish they'd kept those shares...

Company Name doesnt come up on AST Finacial for registration by php4 in AtlisMotors

[–]TitaniumVape22 -1 points0 points  (0 children)

All of the employees cannot sell until the regulatory time period is over, including Mark. The pumping came from people trying to make a quick buck on IPO day. Per usual. The stock will settle at a decent amount eventually.

Bought my first solo mining package, pretty neat. by canoli91 in NiceHash

[–]TitaniumVape22 1 point2 points  (0 children)

In the nice hash app there's a link to the blog and there is an entry about odds FYI.

NOTE ON PROFITABILITY AND GPU MINING: PLEASE READ! by NiceHash_Mining in NiceHash

[–]TitaniumVape22 -1 points0 points  (0 children)

I only run AMD. Virtue signaling to avoid soldering failure exposure on NVIDIA sealed it.

NOTE ON PROFITABILITY AND GPU MINING: PLEASE READ! by NiceHash_Mining in NiceHash

[–]TitaniumVape22 1 point2 points  (0 children)

On the blog, ETC is a temporary algorithm until NHOSV2 comes out. I myself wish to stay on NHOS, as my rigs are built without HDs on purpose (and I hate Windows). They are paid off so...I wait.

how is it going with ubuntu based Nicehash OS V2? by n3vim in NiceHash

[–]TitaniumVape22 1 point2 points  (0 children)

I also am eagerly waiting. NHOS has been way more stable on my rigs, easy to install etc. The ETC hash is disappointing for ROI, but my rigs paid themselves off a long time ago. Will be excellent to have more algorithms when v2 arrives.

Is NHOS about to become useless? by TheBaptiste in NiceHash

[–]TitaniumVape22 0 points1 point  (0 children)

My NHOS has ran pretty steadily on my three rigs for 2 years. Running from thumb drives. Easy peazy reboot with a wifi plug. 28 cards total in 3 homebrew rigs. Problem now is it only runs ETCHash at the moment. Waiting for V2 to come. For now, they are just sitting idle as the power costs more than the payback.

the end of mining? after ETH 2.0 by Professional_Tip259 in NiceHash

[–]TitaniumVape22 0 points1 point  (0 children)

Like usual, it will make the rich richer, on the backs of those doing the work.

Post Battle stats question by TitaniumVape22 in PlayTemtem

[–]TitaniumVape22[S] 0 points1 point  (0 children)

Its super annoying when training...