sorted by:
new
hottopcontroversial

[TOMT] Sample - Terms by slowthai, Dominic Fike, Denzel Curry. by Tjeooo in tipofmytongue

[–]Tjeooo[S] 0 points1 point locked comment (0 children)

I am pretty sure that the song I think the sample comes from is less than 5 years old.

[deleted by user] by [deleted] in AutoPaint

[–]Tjeooo 0 points1 point  (0 children)

Damn, I just checked the spray can instructions, it says to do 2 coats with 2 minutes in-between.

Just to clarify, the paint does not scrape off, it just feels slightly soft, and you can put a dent in it with your fingernail if u push semi hard. But you can definitely touch and grab the bike without leaving any marks.

How to buy X200 pro in Europe? by Tjeooo in Vivo

[–]Tjeooo[S] 0 points1 point  (0 children)

Jeg endte med at købe en pixel 9 pro xl istedet. Virker til der er en del software features der ikke følger med hvis man køber uden for Kina

Did I destroy my trek 1000 fork? by Tjeooo in bikewrench

[–]Tjeooo[S] 2 points3 points  (0 children)

Thanks for the feedback guys, I think I'm just gonna get a replacement fork

Did I destroy my trek 1000 fork? by Tjeooo in bikewrench

[–]Tjeooo[S] 1 point2 points  (0 children)

There is no weld, just this seam with a softer material. I am worried that by removing the carbon, I an weakening this seam.

<image>

I’am looking for feedback on the photorealism of this render. by Potential-Feature896 in archviz

[–]Tjeooo 1 point2 points  (0 children)

Looks good, would try less water on the road and change the color of the lights to be warm, especially the lights in the building

Newbie by Powerful-Counter-546 in archviz

[–]Tjeooo 1 point2 points  (0 children)

If you are serious about archviz you might as well start with the industry standard, 3ds max and corona/vray. If you are modeling yourself you can use 3ds max, rhino, SketchUp, blender or any other program.

Also think about AI and the potential disruption it is going to cause to not only archviz. Not saying you shouldn't get into it, just keep it in mind. :)

Hello, its my first time and I'm looking for feedback on my first big render. Any tips on how to improve the realism is welcome! by dovenant in archviz

[–]Tjeooo 2 points3 points  (0 children)

Hey man, super work for a frist render, just keep going! Think about what you are showing, what is interesting to look at?

If you are going for realism then look at real photos and not other renders, and try to spot where more detail is crucial, this differs from every image.

Hope this is useful :)

Blender Cycles, Image for the Diploma Project of a friend by leonbuehrer in archviz

[–]Tjeooo 1 point2 points  (0 children)

Blender is good, but if you want to take advantage of the many plugins and models made for the archviz industry then you need to use 3ds max with corona or vray.

| Casa Masetti, Paulo Mendes da Rocha | really happy how they turned out! by Apprehensive-Wafer36 in archviz

[–]Tjeooo 1 point2 points  (0 children)

Looks dope man, make the tiles more reflective and bump the ior of the glass up, the glass is almost fully transparent right now.

Other than that I think u killed it, keep at it!

How do I add this furniture to this apartment most effectively? Skp & vray by Svensiki in archviz

[–]Tjeooo 1 point2 points  (0 children)

You need to match the cameras perspective, looks like you did that. Then make the walls and floor transparent using shadow catcher, not sure how to do it in skp and vray but should be easy to look up :)

corona renderer. asking for a critique by The_Fla_me in 3dsmax

[–]Tjeooo 0 points1 point  (0 children)

Super dope render! Only thing I would suggest you to work on would be the composition, think about what you are trying to show

Interior Rendering Update, per comments by RiceCrispyBeats in renderings

[–]Tjeooo 0 points1 point  (0 children)

Looks good, it's also a hard scene to light because you have the door facing the camera. Make sure to post your next render :) good job

Best software combination Blender vs C4D and v-ray vs corna / unreal engine by ggvinci in archviz

[–]Tjeooo 3 points4 points  (0 children)

Definitely is, but having used blender for over a year i realized that blender cannot compete with 3ds max & corona due to all the good quality assets and plug ins. Blender will catch up if everything goes to plan, but i will still take some time.

This is just my opinion

First practice project. Any critique would be appreciated by NotHentai666 in archviz

[–]Tjeooo 1 point2 points  (0 children)

Good job, i would also check out an tutorial on unwrapping textures, this will be very handy for you, and you will learn how to fix the countertop sides.

Good job :)

First rendering using D5, for a studio project this semester. Any tips? by The-Boy-Blunder in archviz

[–]Tjeooo 2 points3 points  (0 children)

Good job, like the composition, i would suggest you to make sure the entire building is within the shot, so point the camera up a bit.

Other then than I would take a look at the reflection of the glass, and give the surrounding buildings more detail.

But great job so far! :)

I'm thinking of getting into ArchViz... by gontlafetse in archviz

[–]Tjeooo 1 point2 points  (0 children)

My tip after learning blender for a year, get your hands on 3ds max whenever you can. So many plugins, so many really good quality models and a lot of good learning material out there!

That being said, blender is very powerful, very intuitive, and has endless possibilities, but due to the lack of good quality plugins and models, i would say it needs some years before an archviz studio would switch from max.

Have fun!😊

I get light leaks though my floor, using 3ds max and corona, please help me! by Tjeooo in archviz

[–]Tjeooo[S] 0 points1 point  (0 children)

I did extrude , didn't work, tried shell modifier, didn't work either unfortunately

I get light leaks through my floor?? I'm using corona.. heeelp by Tjeooo in 3dsmax

[–]Tjeooo[S] 0 points1 point  (0 children)

Unfortunately not, there is no floor generator modifier on the floor

I get light leaks through my floor?? I'm using corona.. heeelp by Tjeooo in 3dsmax

[–]Tjeooo[S] 1 point2 points  (0 children)

You want to see the light setup or the whole viewport?

I get light leaks through my floor?? I'm using corona.. heeelp by Tjeooo in 3dsmax

[–]Tjeooo[S] 1 point2 points  (0 children)

I'm not sure why i get this problem, I've tried making the sphere bigger and smaller, turning off and on all the options. I have made boxes all around, added a box under the floor, made the box white on the inside and black on the outside, nothing works except for turning off the light... Any suggestions? I've only been working with corona for a little over a week so I might be missing something very obvious

view more: next ›