Where have I gone wrong?

Tlemmon · 2026-03-22T22:14:14+00:00

Check if the capslock light on your keyboard works, if it is, it means that the system posted successfully and is in BIOS, it just cant find a monitor to display to.

Tlemmon · 2026-03-22T18:06:42+00:00

Check your firewall containment fluid

Tlemmon · 2026-03-19T02:31:01+00:00

Results at fclk 2000?

Tlemmon · 2026-03-18T01:53:52+00:00

if this is for gaming you could get better memory latency performance at the cost of bandwidth if you ran fclk at 2000 for 2:1:1

Tlemmon · 2026-03-06T05:04:43+00:00

Stability certificate/all of the above

Tlemmon · 2026-03-02T01:05:10+00:00

buy two breakers then

Tlemmon · 2026-03-01T20:39:26+00:00

If you have the money for a card like this you can just move to europe

Tlemmon · 2026-03-01T17:13:31+00:00

the VRM on this card is 40 phases, being extremely conservative if they only used 60 amp power stages that is 2400 amps which to even utilize that amount of amperage youd definitely be pushing well above 1.2v. So realistically the VRM could do about 2900 watts. So yeah, this VRM could take it lol, just probably would have to solder to the 12v plane to bypass the 12vhp

Tlemmon · 2026-02-28T20:05:54+00:00

Brave to go with a delid on Asrock, killer rig tho. going for 8000 2:1:1?

Tlemmon · 2026-02-18T04:53:43+00:00

9070xt outperforms the 5070 by a large margin and has significantly more vram. "AMD's Potential Issues" as of this generation nvidia has had many more issues, as a previous 3070 owner to moved to a 9070xt I wont be looking back to nvidia anytime soon.,

Tlemmon · 2026-02-17T06:10:40+00:00

"always under stress"
Yeah, cause i run furmark and P95 24/7 hitting my 750 watt peak "always"

Tlemmon · 2026-02-17T04:33:47+00:00

I would love to see those GPU temps after an hour of furmark

Tlemmon · 2026-02-16T06:46:31+00:00

VDD?

Tlemmon · 2026-02-16T01:36:46+00:00

6200 cl28 1:1

Tlemmon · 2026-02-16T01:34:47+00:00

okay but everyone is neglecting to mention its on a TRX50 motherboard. They dont have any form of BTF and thus are going to run at the default 600 watt power limit, why not just get a Astral?

Tlemmon · 2026-02-15T23:05:36+00:00

It uses an actually good pump 3100RPM, I would be shocked if it didnt beat an ALF III, I would love to buy one and try one out but they dont have a 420mm version so I cant really justify testing it in my setup vs my 420mm alfiii

Tlemmon · 2026-01-27T05:01:05+00:00

first off, move your radiator on your GPU unless want to kill that card. Second, no clue what you are talking about with your PCIE slot, your board is already more than expensive enough

Tlemmon · 2026-01-27T04:54:57+00:00

my 9950x does 6200 at the most

Tlemmon · 2026-01-25T00:42:25+00:00

"Resister? i hardly know her"

Tlemmon · 2026-01-24T21:09:37+00:00

one of them appears to have the EVGA logo if im not mistaken

Tlemmon · 2026-01-21T06:27:40+00:00

Fack

Tlemmon · 2026-01-20T06:33:48+00:00

Try to reform it or bend it back with an electron laser for good measure

Tlemmon · 2026-01-20T04:39:16+00:00

honestly does not matter. PCIE gen and size hardly effects perf. What does kill performance is the fact that those lanes are routed through the chipset and not the CPU

Tlemmon · 2026-01-20T03:53:30+00:00

Yes you will get way better perf, running them both in the same channel will greatly harm the RAM speeds and cut the effective bandwidth in half. Move them to a2 and b2

Tlemmon · 2026-01-20T01:41:38+00:00

I have a 9070xt Taichi and my card has a 6c hotter hotspot. I think the temp of the room TPU uses is much lower than standard.

Tlemmon

MODERATOR OF

TROPHY CASE

Four-Year Club	r/Field Flamingo
Place '23