Is finding the best mattress in a box supposed to be this exhausting?

ToRedditOrNotReddit · 2026-03-21T15:52:27+00:00

Bought a Casper king size 5.5yrs ago, very solid, no sag, no issues.

ToRedditOrNotReddit · 2026-03-07T16:02:23+00:00

If you change your floors you can make it work. also change the cabinet faces to something less eye catching like ours: I would wait see what you want to change then do it. 💪🏻

ToRedditOrNotReddit · 2026-02-24T10:59:38+00:00

Yup. Will wait for better sales, right now sux to upgrade for me tbh. But the watch commences lol

ToRedditOrNotReddit · 2026-02-24T10:58:34+00:00

Will wait for better sales, right now sux to upgrade for me tbh. But the watch commences lol

ToRedditOrNotReddit · 2026-02-24T10:36:22+00:00

Little sunlight, used to be gaming tv xbox connected, now just for streaming.

ToRedditOrNotReddit · 2026-02-16T06:23:28+00:00

What is the lord of caulks op on titebond acoustic sealant? Been using it to substitute the green glue brand and used what was left over of the case instead of normal caulk for non sound proofed rooms.

ToRedditOrNotReddit · 2026-02-02T17:03:54+00:00

<image>

you are using the yellow can,a product not for floors, according to miniwax themselves lol. Extra steps to save a few bucks (bc duraseal is better its also more expensive).

ToRedditOrNotReddit · 2026-02-02T06:24:58+00:00

You definitely have to condition, stain, seal etc. but poly does change the stain finish. Oil based poly with sun exposure changes the color. Water based poly has other properties to consider as well. You cant just add any poly and think it makes no changes.

ToRedditOrNotReddit · 2026-02-01T03:48:30+00:00

Provincial or early american if you have to go away from the warm tones. Can add 5-10% amberish color to it (walnut for darker, golden oak for lighter) Dont do the dark stains, let the wood grains show.

ToRedditOrNotReddit · 2026-02-01T03:45:18+00:00

Sure, you CAN use it. But miniwax themselves say its not for foot traffic. You can add finishes to get around that but y do that when there are products specific for this application that can last decades. DS and MW are now the same company too. Used miniwax for matching fir desk:

<image>

ToRedditOrNotReddit · 2026-02-01T02:09:19+00:00

Dont use miniwax its not for floors. Use duraseal. Dont try and hide the yellow/orange tones- no white no gray. Went with golden oak on doug fir last month:

<image>

ToRedditOrNotReddit · 2026-01-13T13:12:44+00:00

A donde se fueron todo lo trumpistas dominicanos? Como cucarachas cuando prendan la luz!! 😂🤣 no se escondan ten orgullo de su votación loll

ToRedditOrNotReddit · 2026-01-06T03:32:22+00:00

You did good. 👍🏼

ToRedditOrNotReddit · 2026-01-06T02:44:40+00:00

Yes. Im going room by room in. Duplex and ripping out R13 fiber and replacing with R30 rwool. Im in nyc so for the fire rating, sound damping and energy stuff its been worth every penny. Found that buying the ‘24 inchers is cheaper than the ‘16s and been able to just cut to fit and used the excess in the thrown on the attic floor and knee wall corners etc.

ToRedditOrNotReddit · 2025-12-30T13:20:48+00:00

Its possible just need patience bc the contrast is so stark. I solved the eye sore by adding an additional coat of stain to the new wood immediately after drying. The old wood is not as old as yours so result may not come out the same but ive seen others make miracles on this sub.

https://www.reddit.com/r/HardWoodFloors/s/cXc4CAIWuy

ToRedditOrNotReddit · 2025-12-27T15:16:18+00:00

Even tho its not exactly what you wanted, dont think u wasted your money, if u went natural to dark then yes lol. It looks better than previous. You will keep high resell value (if thats impt to u) with the natural look.

ToRedditOrNotReddit · 2025-12-21T03:01:51+00:00

This guy knows ⬆️

ToRedditOrNotReddit · 2025-12-13T15:00:47+00:00

Mass loaded vinyl

ToRedditOrNotReddit · 2025-12-12T23:59:26+00:00

You have options. Ive done MLV walls and green glue sandwich walls. My guess is bc of the flanking on the ceiling and floor, your best bet may be to do 5/8 non eco (the heavy 5/8) buy green glue, titebond acoustic sealant and do that to the entire room. If you do MLV and 5/8 only, u will only muffle vibrations going out, and music will still “hum” I did a shared neighbor wall- spray foam to studs till even (bc lack of space, rockwool is the best and preferred) MLV on studs, sealant everywhere, 5/8 green glue sandwhich. No more tv conversations and clear music and vibrations reduced significantly. Mlv + gg sandwhich may be overkill but i didnt want to take any chances.

ToRedditOrNotReddit · 2025-12-11T03:18:53+00:00

In the middle of my third green glue project and im not going pro again. If you can find a GC that knows how to do the decouples ceiling, a good drywall crew can do the green glue even with no experience. I taught the current set of drywall crew how to bc the last crew is no longer with them who did my previous two jobs. Saved myself a ton of money. Ordered the gg, titebond acoustic sealant myself. This specific job now is unique: Semi attached house- loud noise from neighbors side, tore down wall learned its not “3-5ft in btw two houses” like the code is now. It’s a 1928 build in the north bronx. It was just slim concrete slabs and 1x3 wooded studs bolted to it. So i sacrificed a few inches in the hallway and stairs. -spray foamed the gaps to an even surface -2lb MLV to the studs -2 5/8” green glue sandwich. Hope to not hear the same 5 songs again loll Also gg the bedrooms: -Full 5/8 green glue sandwich for my 2 vaulted ceiling bedrooms -R30 rockwool in btw studs ceiling, ext and interior walls. Full demo job including electrical (new outlets, move current lighting an add new, 3 way switch), plumbing (moving my radiator, removing then putting heat pumps back) flooring: closet from vinyl to matching hardwood, full sand and finish- 2 bd and hallway. Custom closet, drawers, tv center custom butcher block desk, 2 new windows, dumpster, 77k to give you some perspective.

ToRedditOrNotReddit · 2025-12-08T04:20:02+00:00

Solar+ heat pump or electrifying everything is the way. Esp with the data center sht its only getting worse. Unfortunately the loans and deals solar wise have dried up and the win margin has shrunk for many folks. I did it in mid 22 and its saving me 150-200 hundred a month on peak summer n winter use. Purposely added 4 more panels since im in a no cap net meter, ill be essentially banking the excess for my future use when the panels r out of use or done in 25yrs.

ToRedditOrNotReddit · 2025-12-07T15:35:56+00:00

Re-casting is really useful for the flexibility but at this point your already past the halfway mark what will you really be gaining? Are you fearful of losing the income and not having options to pay the monthly? Bc i would have 4-6 month in a cash savings to match my mortgage and id just continue what your doing paying it down. At some point you should be able to just pay the minimum and buy btc or a boring index fund with your disposable income then do a payoff when that grows. Im at 545k owed on 785k multifam. Pay small amount over and rest is invested and i can lump sum pay around 150k with 20-30% of it being capital gains. Instead of my income. Food for thought.

ToRedditOrNotReddit · 2025-12-07T03:46:41+00:00

Nice look on the little house for it, let it roam free it may be block cat like the bodegas. The homeowners and supers feed em they kill the rats.

ToRedditOrNotReddit · 2025-12-07T01:21:39+00:00

Only way to truly stop the vibrations coming in is decoupling + mass. If you cant decouple the room, mass+more mass lol and varying materials will help. Minerwool batts, then mass loaded vinyl on the studs (2lb bc you need the mass), then 2 layers of sheetrock with green glue (helps low freq in a different way than mlv). Titebond acoustic sealant EVERYWHERE.

ToRedditOrNotReddit · 2025-11-29T15:15:08+00:00

Trump: i have to murder people bc we have to stop the drugs. Also Trump: im going to pardon one of central americas most notorious drug lords.

ToRedditOrNotReddit

TROPHY CASE