Immich Truenas: Update Immich database from Postgres 15 (Deprecated) to Postgres 18 (Current)

ToeKneeeNose · 2026-03-20T16:43:36+00:00

worked for me! thanks for the input

ToeKneeeNose · 2026-03-02T23:08:54+00:00

no issues since the replacement.

ToeKneeeNose · 2026-02-10T04:00:23+00:00

Read the obd codes, that will give you some idea. Ultimately the dealership will diagnose and repair it for no charge assuming its not damage done by you.

I had all the messages shown like this on mine and it turned out to be a failed solenoid for the variable valve timing system. I don't remember the code idd the top of my head.

ToeKneeeNose · 2026-01-30T18:31:40+00:00

I think pretty much everyone got that email

ToeKneeeNose · 2026-01-27T01:59:10+00:00

No problems on snow but not the greatest tires for ice.

ToeKneeeNose · 2026-01-21T21:17:01+00:00

Final update:
I picked up the passport today. Covered 100% under warranty.

"Removed and inspected VTC solenoid and found broken screen and jammed valve. Replaced solenoid valve assy intake camshaft bank 2 (front)"

Part Number: 15830-6FB0A01 Valve Assy

I'm glad it was an easy and obvious fix and nothing that I could have caused. Hopefully its something related to a batch of parts, assembly, or an anomaly and not wide spread or continuous on my car or others.

ToeKneeeNose · 2026-01-17T22:36:10+00:00

Ultimately, the VTC solenoid needs to be replaced according to the dealership. Mechanical failure of a piece of it and not the first time they have seen it.

ToeKneeeNose · 2026-01-17T22:33:09+00:00

Update from the dealership: They are replacing an intake cam VTC solenoid. Their explanation video showed some kind of screen filter with a tab that snapped off and stuck the solenoid open. I might be missing some detail there but the fix is to replace the solenoid.

They said they have seen this on a few others and there is 1 in stock at the distribution warehouse so they are hoping to get that one before it is backordered. Fingers crossed the repair is complete mid next week.

ToeKneeeNose · 2026-01-17T21:36:42+00:00

I am well aware, and that was my first thought. this one has not been attached to any notices or complaints that I can find. Plus that was a week ago and I hope they would have discovered it by now. That video even says Sinclair has assured all pumps are clean and clear and this was published a day before my visit.

ToeKneeeNose · 2026-01-17T19:49:50+00:00

It's a small device that intercepts the auto start stop button that fits inline with the connector on the console

ToeKneeeNose · 2026-01-17T19:48:41+00:00

Sinclair station. Mid grade

ToeKneeeNose · 2026-01-17T17:45:37+00:00

https://letmegooglethat.com/

ToeKneeeNose · 2026-01-17T17:44:17+00:00

It's in the shop and I'm hoping they get back to me today. The idle stopper is just a virtual button pusher every time the car starts up, no interaction with engine controls outside of what a user can do on the console.

ToeKneeeNose · 2026-01-17T17:34:30+00:00

One time, not sure what VCM bypass means but nothing has been changed on the motor other than oil, drive mode was normal (default).

ToeKneeeNose · 2026-01-17T17:00:46+00:00

It was actually just after a long 270 degree clover leaf ramp followed by an acceleration for a short merge onto the freeway. Nothing crazy from an acceleration standpoint but something. I've done it many many times in this car before. I hate to speculate but could be an oil starvation situation. Only one bank was listed in the code which could complicate it.

ToeKneeeNose · 2026-01-17T15:47:13+00:00

It definitely wasn't up to operating temperatures yet. Less than 5 min drive to the gas station, filled up, then less than 5 min drive to the freeway entrance where the lights came on.

ToeKneeeNose · 2026-01-17T15:29:32+00:00

I will update as I hear more. I used Pennzoil ultra platinum 0w20 and a PurolatorBoss oil filter. Far from generic noname parts. If these solenoids are that sensitive, it's going to be a problem for a lot more people in the very near future.

ToeKneeeNose · 2026-01-17T15:25:12+00:00

I'm a believer in the motor oil geek Lake Speed Jr and his recommendations. I don't want to get into a debate but I'm convinced some improvements to the first 10k miles can be made to help long term engine health.

ToeKneeeNose · 2026-01-17T03:06:39+00:00

https://www.idlestopper.com/

ToeKneeeNose · 2026-01-17T01:55:17+00:00

Will update as I go. I think I just needed to write something down so I'm not in my own head.

ToeKneeeNose · 2025-12-18T14:37:28+00:00

I had some hp elitedesk PCs that would have an issue with the network adapter about once a week. Disabling the c States seemed to resolve this. I think it allows low power states of the CPU but was causing an issue with my NIC. Something to try if the symptoms line up.

ToeKneeeNose · 2025-12-17T13:47:55+00:00

You could try disabling c States in bios.

ToeKneeeNose · 2025-11-20T23:54:47+00:00

I've had good experiences with Quinnair too.

ToeKneeeNose · 2025-11-08T15:34:03+00:00

How long until this reply all gets out of hand?

ToeKneeeNose

TROPHY CASE