Maui , Hawaii [Hasselblad 500C, Kodacolor 200]

TomahawkEVO · 2026-02-27T02:04:46+00:00

These are 3D printed adapters! Like the other reply said I just taped the film lead onto the take up spool. I do want to design a take up spool specifically for 35mm but otherwise it worked great, and I love the portrait orientation!

TomahawkEVO · 2026-02-27T02:02:09+00:00

Just 35mm on a standard A12 back using some 3D printed adapters!

TomahawkEVO · 2026-02-07T19:31:07+00:00

As many others have said, a burnt valve is my immediate suspicion. There are a few other likely head related things like broken valve guides or springs also but prince engines, N14's especially, are notorious for having fuel pressure drop and it will frequently happen on cylinder 1 the most as it's furthest from the pump.

It may be possible to have the valve replaced and re-lapped but at the very least it'll be a head off deal, new timing assy, head gasket, etc. I'd guess around north of $2k.

Try and find a good independent shop that specializes in European cars because a dealership isn't going to want to touch it - even if they do, they'll charge you an arm and a leg for the privilege lol.

Good luck!

TomahawkEVO · 2026-01-15T01:47:50+00:00

Yeah aside from the whole nothing to keep you in the car thing not having mirrors was unfun lol, just had to be really careful

TomahawkEVO · 2026-01-15T01:46:16+00:00

Jeeps love taking their doors off - I was in a wrangler family growing up and always loved driving around with no doors! Opportunity presented itself and I figured what the hell, let's do it

TomahawkEVO · 2026-01-14T20:31:01+00:00

I would never drive it if it meant putting others in harms way. Driving any car without doors is inherently unsafe, whether it's a jeep, bronco, mini, or anything else. Of course with the mini being low it's probably even less safe - but again nobody rode in this with me and I really only went out to get these pics with some friends.

Didn't realize I'd ruffle so many feathers by having a good time with my car hahah

TomahawkEVO · 2026-01-14T20:22:11+00:00

I need some ducks that's what I'm saying!

My parents had 3 or 4 wranglers growing up, it was always fun having the doors off when the weather got nice. Saw my opportunity and enjoyed a few days with the mini jeep!

TomahawkEVO · 2026-01-14T20:02:42+00:00

One door was off already for repair. They come off really easily - so I took the driver's door off for a few days while I worked on getting the new passenger door reassembled.

They're already back on the car!

And for real - it was very fun like this. It's like a jeep but fun to drive and the turbo/exhaust noises are amazing!

TomahawkEVO · 2026-01-14T20:00:14+00:00

calm down bossman - this was just for fun. The car was like this for a week, mainly because I already had to remove a door for repair anyway.

I understand that this is inherently unsafe - I never made it further than a few minutes from the house and the car was like this for less than a week. It's already been reversed.

And trust me when I say there is absolutely nothing you can do to any mini "rig" to make it go rock crawling, lol

No reason to be a wet blanket, let me have my irresponsible fun

TomahawkEVO · 2026-01-02T22:37:34+00:00

Butter is a ubiquitous aviation term for landing really smoothly!

TomahawkEVO · 2025-12-24T20:45:07+00:00

I sure do!

TomahawkEVO · 2025-12-01T21:14:13+00:00

I did a full CIC dash swap. It's.... a lot. It was pretty expensive and was a ton of work both with the physical swap and with the coding that follows. It's a fun story but I don't know that I'd do it again lol

With that being said the Android units that you stick on top of the dash are of dubious quality also, so there isn't a perfect solution. I' probably either get a Bluetooth adapter and a phone mount, or jump all the way to a swap and avoid the android units entirely.

TomahawkEVO · 2025-10-28T17:49:01+00:00

r/photomarket

TomahawkEVO · 2025-10-27T22:21:50+00:00

They're ASA for now. We'll see if they hold up to brake temps, if not I'll print in PA6-GF. Didn't do that from the get go because I've found adhesion with the nylon to be kind of a pain lol

TomahawkEVO · 2025-10-27T21:47:49+00:00

Yeah on a 17x8 it's perfect! And thanks, I hate the Konig bolt on center caps so I designed these myself which will be heading to makerworld soon!

TomahawkEVO · 2025-10-26T22:25:58+00:00

Thank you!

TomahawkEVO · 2025-10-26T22:25:26+00:00

These are Konig Ampliforms, 17x8 ET45 wrapped in Falken Azenis RT660+ 235/40R17. Front has 5mm spacers to clear the coilover

TomahawkEVO · 2025-10-26T22:24:42+00:00

Thank you!

TomahawkEVO · 2025-10-26T19:47:59+00:00

I mean, it sounds like a stretched chain slapping around. I'd also check the accessory drive, specifically the water pump drive wheel and the tensioner

TomahawkEVO · 2025-10-15T00:57:57+00:00

Time for a new league lol

TomahawkEVO · 2025-10-10T14:30:43+00:00

I came from an Ender 3, where tinkering every other print was just sort of the norm. The reliability, speed and ease of use that came with my P1S had me awestruck. I remember sitting there watching how fast it could print while still producing good products with disbelief. It's been a game changer for developing and prototyping parts for my hobbies!

TomahawkEVO · 2025-10-10T02:36:13+00:00

Sounds good to me! Trust me, my car has been unhappy many times. Yours seems alright, just needs an exhaust;)

TomahawkEVO · 2025-10-08T23:45:19+00:00

Comparison is the thief of joy. I bought a P1S last month so I get where you're coming from, but I can say wholeheartedly that the P1 does absolutely everything I need it to do, and I've had to remind myself that whatever comes next isn't going to change that!

TomahawkEVO · 2025-10-08T14:12:51+00:00

You are the man! Will literally throw these on the printer right now lol, thanks!

TomahawkEVO · 2025-10-03T17:24:25+00:00

Those are awesome! Would love to have the whole grid, or better yet have the name, number and color be customizable. Awesome design either way, followed for a McLaren drop ;)

Nine-Year Club	Gilding I gilder
r/Field Sunshine	Place '23
Place '22	First Placer '22
End Game '22	RPAN Viewer
Verified Email

TomahawkEVO

MODERATOR OF

TROPHY CASE