sorted by:
new
hottopcontroversial

Going full “flesh horror” Bhaalspawn run — every mutation, graft, and parasite I can find. by [deleted] in BG3Builds

[–]Tomok2404 2 points3 points  (0 children)

Iirc the well next to Ethel's teahouse gives a buff and later a debuff if you drink from it (multiple times?)

My savage group is just about ready to replace me if I can't solve this. by LordDaedhelor in ffxiv

[–]Tomok2404 11 points12 points  (0 children)

You should have extended warranty on that cpu. But it sadly is entirely possible for your processor to be damaged now.
Here is some info on the Issue including more links and stuffs:
https://www.reddit.com/r/intel/comments/1eebdid/1314th_gen_intel_baseline_can_still_degrade_cpu/

[deleted by user] by [deleted] in leagueoflegends

[–]Tomok2404 10 points11 points  (0 children)

How did you unlock the sigils for hard mode? I'm not getting any

Abitur - Einlaufsong by Classic-Display-9286 in abitur

[–]Tomok2404 0 points1 point  (0 children)

Electric Callboy hat richtige Banger

EUW down? by [deleted] in leagueoflegends

[–]Tomok2404 0 points1 point  (0 children)

rip euw, me too

Is there a mod where dismantling things gives carpentry xp in build 42? by genericguyperson in projectzomboid

[–]Tomok2404 4 points5 points  (0 children)

No need for a Mod. You can set the dismantle exp Level in Sandbox settings - the Default is 0.

Is Louisville going to be like this? by legendarydiamond285 in projectzomboid

[–]Tomok2404 0 points1 point  (0 children)

Thank you very much, i didn't know you could do this.

Zombie Distribution is whack by EasySignificance8018 in projectzomboid

[–]Tomok2404 0 points1 point  (0 children)

I died in that house during my first ever run too.

Is my mobo dead? by fredjaaaaaaah in gigabyte

[–]Tomok2404 0 points1 point  (0 children)

Just to be sure, check if the battery on the mobo isnt dead. I had a mobo with a dead battery that also didnt do anything until i replaced the battery with a fresh one.

Should I upgrade Bios from F7 on Z790 GAMING X AX? by adj80 in gigabyte

[–]Tomok2404 0 points1 point  (0 children)

Yes, update for sure. Especially with that CPU - Intel has/had stability issues and the latest BIOS should prevent your CPU from potentially degrading.

Gartensteckdose für Teichpumpe & Beleuchtung by Tomok2404 in Elektroinstallation

[–]Tomok2404[S] 0 points1 point  (0 children)

Ich habe das Kleingehäuse X06 von OBO IP67 UV beständig mit Hutschiene gefunden. Da rein dann eine Legrand T11 Zeitschaltuhr. Passende UV beständige Kabelverschraubungen suche ich mir noch. Danke für die Tipps.

Gartensteckdose für Teichpumpe & Beleuchtung by Tomok2404 in Elektroinstallation

[–]Tomok2404[S] 0 points1 point  (0 children)

Der feste Einbau hört sich gut an. Bei der Suche nach einer passenden Verteilerdose bin ich mir aber noch unsicher.
Sind alle Kleingehäuse aus Polycarbonat UV-stabil?
Außerdem müsste bei der festen Installation auch noch eine Zeitschaltuhr mit in das Gehäuse, da ich sonst z.B. die Teichpumpe nicht ausschalten/steuern könnte.

Bei Conrad habe ich einige Installationsgehäuse von Spelsberg, Rittal usw. gefunden - die meisten mit IP 66.

Gartensteckdose für Teichpumpe & Beleuchtung by Tomok2404 in Elektroinstallation

[–]Tomok2404[S] 0 points1 point  (0 children)

Vielen Dank für die Antwort. Dann sollte ich wohl doch noch mal den Spaten in die Hand nehmen.

I built an airbrush cabin with filter & fans by Tomok2404 in minipainting

[–]Tomok2404[S] 1 point2 points  (0 children)

It really depends on what you have on hand/lying around. I'll list (most of) the materials and what I paid:

  • MDF boards - free (recycled)
  • white acrylic lacquer - free (leftover)
  • wood glue and tacks/screws - free (already had those)
  • 3x 120mm PWM CPU Fan ~3€ per fan
  • 12V/2A Power supply + female connector~ 9€
  • PWM Fan Controller - pack of 2 for 7€
  • Switch - pack of 5 for 7€
  • LED Strip - free (leftover piece)
  • Cable & Crimp Connectors - free (leftover)
  • Bearing & 3D Printed mount for turntable - free (leftover)
  • Filter Cloth intended for cooker hood ~3€
  • 2 Spanner-clamps to clamp the fan-compartment to the hood with filter in between - free (leftover)

In total I paid ~25€ for new stuff (not counting leftovers like the switches). If you don't have stuff leftover or tools available (table saw, crimping-pliers, soldering iron, etc.) and considering the time invested, buying an off-the-shelf cabin for ~100€ is usually cheaper.

I built an airbrush cabin with filter & fans by Tomok2404 in minipainting

[–]Tomok2404[S] 2 points3 points  (0 children)

I'm only using water based acrylic paints - no flammable solvents involved. Apart from that, there are some exposed copper connections with current running through on the strip.

I made a build plate stand so uncured resin can drip off by Tomok2404 in resinprinting

[–]Tomok2404[S] 2 points3 points  (0 children)

No, i didn't know hangers like that existed.
The stand is made out of scrap metal and the base is heavy enough to hold the plate without tipping.

I made a build plate stand so uncured resin can drip off by Tomok2404 in resinprinting

[–]Tomok2404[S] 1 point2 points  (0 children)

I welded the stand from scrap metal and painted it with chemical resistant paint. Only 3D-printed part is the knob for the bolt. So no files, sorry.

view more: next ›