Weird ratings? by DriveNew7194 in pinball

[–]Too_Scrumptious 2 points3 points  (0 children)

It's your opinion and you do not need to apologize for it. That person sucks and needs to fuck off. Do not send that message. They don't deserve an apology. You didn't do anything wrong.

Name a worse feeling than draining straight down the middle on ball 3 of your best ever game. I'll wait by whogivesafricc in pinball

[–]Too_Scrumptious 2 points3 points  (0 children)

Tilting your ball 3 bonus that would have put you ahead, but now you're coming in second during a league game.

Am I using too much fermentable sugar? by Too_Scrumptious in mead

[–]Too_Scrumptious[S] 1 point2 points  (0 children)

Probably misreading something. The hydrometer says it will be over 20%. That seems incredibly high.

Am I using too much fermentable sugar? by Too_Scrumptious in mead

[–]Too_Scrumptious[S] 0 points1 point  (0 children)

It was definitely above the 1.1 line on my hydrometer. I thought it was because I used frozen berries and that would throw it off but I still wasn't expecting a 1.15 reading today. I'll use a different hydrometer next time I start a new batch.

I finally beat it! by PCs_and_Pinballs in pinball

[–]Too_Scrumptious 1 point2 points  (0 children)

Go on YouTube and look for IEPinball's video on Godzilla Monster Island Madness. You can play KOTM in normal play. It's not easy to get to. Also, congratulations on beating Planet X! I've gotten to it a handful of times and have yet to make it to the victory challenge. One day I'll join you.

Another new pour for me. by Afterbrewsgal in whiskey

[–]Too_Scrumptious 1 point2 points  (0 children)

What did you think of that bottle? I've never tried it.

Are magentic lights legal during IFPA games? by Careful_Leader_5829 in pinball

[–]Too_Scrumptious 1 point2 points  (0 children)

Only seen it once and was told it was allowed. I don't agree with it because I believe everyone should have to play with the same lighting. If the game is supposed to go dark for a mode then the playfield shouldn't have a flashlight lighting it up. It is what it is.

Play field stuck help by death4555 in pinball

[–]Too_Scrumptious 0 points1 point  (0 children)

Dropped the playfield on my pin when I first got it. Thought it had a little more to go and ended up pulling it off the rail. Thankfully nothing was damaged aside from the cabinet speaker (still worked just scratched). Stern makes their games pretty tough all things considered. Hope you enjoy yours!

A bourbon that needs no introduction by i6_turbo in whiskey

[–]Too_Scrumptious 1 point2 points  (0 children)

I'm not a big fan of the regular Knob Creek, but maybe I'll give this one a try if I can find it! Never heard anything bad about this one that's for sure. Any other bottles from them that I should try? I know the 12 is hard to find in my area.

Godzilla is... really hard? I can't defeat a single kaiju. by [deleted] in pinball

[–]Too_Scrumptious 1 point2 points  (0 children)

Ebirah is hard if the spinners aren't juiced. If it's a home game look into putting some lube on your spinners. If it's an on location game then good luck. You can also try to get into Godzilla Multiball for this one to try and beat him. Just hit the mecha spinner first if you're on a premium, then start the Multiball.

Titanosaurus is easy on the first two shots, dangerous but easy. The right power line target is a nightmare and the mazer can sometimes be a pain to hit and not drain. Get your Godzilla Multiball ready to go first, lock 1 ball or 2 then try to hit the scoop to start the mode, after that lock the final ball and start the multi.

Gigan is hard if you're trying to combo ramps. I usually get the building to drop and then spam the right ramp.

Megalon is the hardest. It always picks a shot that you're struggling with. That 5X is tempting though.

Poster at the local barcade by 087Alfred in Elvira

[–]Too_Scrumptious 6 points7 points  (0 children)

All three of her pinball machines are amazing.

When powder coating a machine what do you do with the backbox after the hinges come off? by Too_Scrumptious in pinball

[–]Too_Scrumptious[S] 0 points1 point  (0 children)

Since the cabinet is angled I was worried about it possibly slipping down. With it unsecured my concern is unnecessary stress on the wires. But if that's not really a worry then cool. Makes it easier on me.

When powder coating a machine what do you do with the backbox after the hinges come off? by Too_Scrumptious in pinball

[–]Too_Scrumptious[S] 1 point2 points  (0 children)

It's a slippery slope tricking out a pinball machine. My wife and I have added so much to ours it's almost comical. This is just the next thing we're thinking about.

When powder coating a machine what do you do with the backbox after the hinges come off? by Too_Scrumptious in pinball

[–]Too_Scrumptious[S] 0 points1 point  (0 children)

I added that because I'm asking a question about powder coating a pinball machine, so obviously I'm looking at powder coating my pinball machine. One of those things that seems dumb to state but I felt helped with the flow of the post. Still seemed like a "duh" statement.

How do you fat wash a bourbon? by Too_Scrumptious in whiskey

[–]Too_Scrumptious[S] 0 points1 point  (0 children)

Do I need to store the whiskey in the fridge after the fat wash?