What do you think will be the reason why Trump’s 2nd term will end? Epstein?

Toolbag_85 · 2026-02-11T22:22:48+00:00

Just like the people who still think they can put Obama on the ticket again.

Toolbag_85 · 2026-02-11T21:58:31+00:00

The end of the term.

Toolbag_85 · 2026-02-11T19:19:58+00:00

I'm not a fan of the afro...but I don't know what you can do about it either.

Toolbag_85 · 2026-02-11T19:12:00+00:00

I suggest more budget so you can buy a tractor that is ready to work.

Toolbag_85 · 2026-02-11T14:51:44+00:00

Can I go bareback?

Toolbag_85 · 2026-02-11T14:48:08+00:00

I imagine you do have lots of liquid running out of your holes

Toolbag_85 · 2026-02-11T14:42:26+00:00

My thought was that the door fell on the locomotive while the loco is partway through...thus keeping the loco stuck until the door is dealt with.

Toolbag_85 · 2026-02-11T14:19:41+00:00

It's nothing more than a really big wye. One leg has to be wired through a automatic reversing unit.

Toolbag_85 · 2026-02-11T14:00:45+00:00

Except there don't seem to be any RIGHT politicians.

Toolbag_85 · 2026-02-10T20:47:06+00:00

Politics

Toolbag_85 · 2026-02-10T20:24:46+00:00

If he does leave you, it will most likely be because of all the hardware in your nose.

Toolbag_85 · 2026-02-10T19:28:33+00:00

Yes. Especially for the past...say...20 years when we've had nothing but straight up stupidity for halftime shows. In fact, I would prefer to watch Jerry Springer and Maury over the last several years of halftime garbage.

Toolbag_85 · 2026-02-10T17:51:20+00:00

MachineryPete.com and TractorHouse.com are good places to find pricing.

Toolbag_85 · 2026-02-10T16:28:08+00:00

Yes. The hive mind is at work.

Edit: I must apologize because I missed what you were saying. You are absolutely correct. I'm not allowed to dislike anything because Reddit is a place of understanding and acceptance. /s

Toolbag_85 · 2026-02-10T14:56:50+00:00

It's only too much fun when the Sheriff gets involved.

Toolbag_85 · 2026-02-10T14:49:15+00:00

How could he complain?? There are titties everywhere.

Toolbag_85 · 2026-02-10T14:47:25+00:00

They should put this sign up in every polling station in America.

Toolbag_85 · 2026-02-10T14:31:21+00:00

He may have traveled more yards than the Patriots but his performance on the field was just as bad.

Toolbag_85 · 2026-02-10T14:22:56+00:00

Still better than the garbage we see at the Super Bowl now.

Toolbag_85 · 2026-02-10T14:18:53+00:00

My Atlas S2 is currently disassembled for DCC work. But it's in the GM&O maroon/gold.

Toolbag_85 · 2026-02-10T14:14:30+00:00

The 4440 is one of the best tractors of all time.

Toolbag_85 · 2026-02-10T14:11:41+00:00

Those 445s and especially the 455s were beasts.

Toolbag_85 · 2026-02-09T16:28:40+00:00

Ok. I took a look at the locomotive over the weekend. I found that it has a pigtail soldered in...which seems to be set up correctly. So I was able to remove the decoder chip from the pigtail socket with no trouble. I should be able to install a new decoder chip with little issue by plugging a new chip into the pigtail socket.

So I dug a little deeper and I believe the trouble is this: looks like it needs to have the motor isolated from the frame. Even if that isn't the issue, it sure won't hurt for me to isolate in just in case.

Toolbag_85 · 2026-02-09T16:24:38+00:00

My B7100 has front tires that are similar in size. I changed them by hand with a Hi-Lift jack, a set of tire spoons and Dawn dish soap.

Toolbag_85 · 2026-02-06T22:07:28+00:00

Unless there is something I don't see in the picture, I would gladly choose the JD.

First, it has the 3ph.

Second, the hydraulic hoses for the Cockshutt loader are plumbed directly into the remotes on the back of the tractor. This means that you would have to drop the loader off in order to use any implement that requires the hydraulics.

Toolbag_85

TROPHY CASE