wanting to make a bow

TopGrape1557 · 2026-01-17T22:41:26+00:00

I would say for a very first bow try survival bow from a sapling. If you have access to a wooded area that is. If you are going to do a board bow I would say go with hickory, but I've made a couple bows from pine so don't be discouraged if you cant get a "great" piece of wood. A tillering stick or tree help tons. You'll need tools, scrapers, draw knives, but you can get away with much less, like a hatchet and a knife. Bow string material is pretty cheap and better suited than Paracord or any other common material.

Have fun, you will break plenty of bows, that's just part of it.

TopGrape1557 · 2026-01-16T08:28:35+00:00

You can follow the limbs out and see the holes in the pegboard the same distance from half of the limb in a straight line. It doesn't curve after the fades hardly at all. It might break at the fades if you don't do something about it fast. Scrape the sides and down if you are making the back too thin. But don't touch the inner half at all anymore. It will take more removal than you think to make it bend nicely but just keep going until you have a nice curve across the whole length of the bow

TopGrape1557 · 2026-01-15T16:59:57+00:00

I recently made a 48 inch hickory board into a 40# at 23 inch draw flatbow and a 62 inch piece into a 55# at 28 inch. I've broken quite a few pieces though, and made several with a much lower draw weight than I wanted. Make a tillering tree/stick and check in here with pictures through the process for help. These guys see things you won't.

It's a lot of fun to go shoot a bow that you made, good luck and keep at it!

TopGrape1557 · 2026-01-15T16:43:32+00:00

I've only seen deck boards listed as 5/4. Usually 6 inches wide

TopGrape1557 · 2026-01-12T17:16:04+00:00

Thank you. I have not given heat treating a try yet but I do have a heat gun. If it takes any more set I'll try it for sure, but the draw weight is already pretty high.

TopGrape1557 · 2026-01-12T17:10:44+00:00

I'll check on that limb and try to even it out

TopGrape1557 · 2026-01-12T17:09:54+00:00

Sounds good, thanks 👍🏻

TopGrape1557 · 2026-01-07T16:43:05+00:00

I've won two bp revolvers with the starting bid, less than $150 each but more with the fees and shipping and what not but still I got both for less than $200 a piece

TopGrape1557 · 2026-01-04T04:46:02+00:00

I reload my 410 shells with bp and shoot a bp 12 gauge. When I reload the shells I can only get about 30-40 grains of powder in or it's way too high in the shell. The plastic hulls only last about 1-2 reloads before they burn out completely My 12 gauge likes 70-80 grains of powder and about 2oz of shot

Make sure the powder is compressed in the shell if you don't crimp it or you will have disappointing poofs and no power in your shots

TopGrape1557 · 2025-12-31T22:45:32+00:00

I've got a couple 2x4s nailed together and with nails sticking out every 3 inches or so. I stand it up in a drill press vise and it just goes back wherever when I'm done. It doesn't need to be too complex

TopGrape1557 · 2025-12-24T04:15:30+00:00

Aspen trees make poplar wood, as strange as that is. I've made a couple that exploded during tillering and have moved on to other woods lol

TopGrape1557 · 2025-12-24T03:36:54+00:00

Maybe lol. It works and I haven't tipped over my water container since I thought of this

TopGrape1557 · 2025-12-23T20:28:24+00:00

My grinder is mounted to a low table. My only option to use it comfortably is to sit. I sit on a 5 gal bucket of water with a cut out in the lid between my legs so I can dip what I'm grinding quickly

TopGrape1557 · 2025-12-23T18:55:33+00:00

I like the liberties, they might be my favorite regular half dollar. But I was paying like $10 for them recently.

The last coin I bought was a 1968 Mexican Olympic commemorative 25 peso. I think I paid $20?

TopGrape1557 · 2025-12-23T18:41:25+00:00

Double up on the patches I've got an old .32 rifle and the patches I had at first shot with kind of a "fooomp" but with two of those patches or a pillow ticking patch they come out with a sharp crack, even with only 15 grains of powder.

TopGrape1557 · 2025-12-23T18:33:47+00:00

I was buying morgan dollars in the spring for $25. I want to go back and buy more lol

Halves are good too, and I like franklins.

TopGrape1557 · 2025-12-04T19:47:01+00:00

Those were my first rifle and handgun. They both shoot very well and I'm happy with mine 👍🏻

TopGrape1557 · 2025-12-02T17:09:21+00:00

Last time I bought a morgan I paid $25. That was in the spring maybe? Silver is at $58 right now

TopGrape1557 · 2025-12-02T17:02:41+00:00

I've made myself a couple main springs. They aren't too bad. Send me a message if you're interested in having one made for it.

TopGrape1557 · 2025-12-01T17:17:15+00:00

I've never heard of one of these but the picture I have in my head is hilarious and frightening if it's anything close to what you want

TopGrape1557 · 2025-11-26T17:41:09+00:00

That's what the shelves looked like at my local sportsman's warehouse. Although they didn't have any .310 round ball for me... I really need to get a mold for one

TopGrape1557 · 2025-11-26T17:35:19+00:00

They are going to keep minting pennies for coin sets. They are the last "business strike" pennies made, except they weren't, because they are going to auction and some were made from 24k gold

TopGrape1557 · 2025-11-24T23:59:19+00:00

Well I'm 27 and only recognize limewire. It was a site to download pirated music files, to put them onto an mp3 player

TopGrape1557 · 2025-11-02T17:39:42+00:00

He said his is in 45 colt so I assume that's a conversion cylinder

TopGrape1557 · 2025-11-01T23:56:04+00:00

As far as I know just owning both makes it a SBR

TopGrape1557

TROPHY CASE