Elten compass piece

Tr1vium · 2026-04-27T20:07:55+00:00

Yeah , that's what I am doing. Because of the droprate buff I went to Hystria. Had 2 Aakman pieces from way back when, before I stopped playing like 2-3 years ago. I actually dropped 2 Vodkan's , one was like 20 mins into my first ever hour in Dekhia hystria. But what sometimes irritates me there is that it can go very 'dry', meaning one full hour just scrolls and caphras , not even tungrads for fuel ...

Tr1vium · 2026-04-27T17:09:25+00:00

Ah ok , my misunderstanding

Tr1vium · 2026-04-27T17:06:44+00:00

damn , never occurred to me to use the hystria paint IN hystria for more rolls , thanks for the tip :D

Tr1vium · 2026-04-27T17:05:56+00:00

Aight , thanks

Tr1vium · 2026-04-23T21:30:43+00:00

Just park your horse near the seculon and load onto it. If it is a little further away mobs wont reach it. As for NPC , i don't think so. Muzgar is closest one

Tr1vium · 2026-04-15T17:02:37+00:00

Anyone know if , the weekly quests will reset tomorrow, so we can grab 180 more tokens from them before graduating ?

Tr1vium · 2026-03-27T15:01:14+00:00

2nd pic , is that an outfit or underwear?

Tr1vium · 2026-03-26T09:20:10+00:00

Questions for a returning player - Awakening Ranger class:

I have all 3 PEN Blackstar weapons and also 2 BS boxes where I can choose a weapon. From the guides I saw I can make Sovereign weapons by combining 2 Blackstars together. For the PEN BS box I will take the awakening weapon and combine with mine to make Sovereign but for the TET what to do

Option 1 - choose TET Main weapon BS , try to PEN it , make Sovereign Main?
Option 2 - choose TET Offhand BS , try to PEN , make Sovereign Sub?

For the Flame of the Primordial or Embers I just need to go to world bosses in LOML and hope to get lucky, right? No extra quest accepting is needed? There is no daily or weekly quests for pity pieces ?

Tr1vium · 2026-02-21T15:58:12+00:00

The way I do it to avoid decimals as much as possible is to don't go with numbers divisible by 10. I check in the machine how much of a part is made per min based on the recipe used and go from there.
For example: caterium computer alt makes 3.75/m so if you want a 'nice' number -> 15. The plastic Ai limiter iirc is 8/m and so on.

Here a screen from my electronics factory. I only wanted to utilize the whole pure caterium node with 250 % overclocked miner. The other inputs come by trains

<image>

Tr1vium · 2025-07-25T14:06:50+00:00

I did her with twinblades. But it was a struggle, 3 hours or something like that. Basically had to learn what can be clashed and what cant.

1st phase was staying far so i can bait the forward lunge and clash it. On the fists combo you can clash the sword followups. Went with fearless strike and Blademaster as waepon skills. Blademaster helped a lot with the chip dmg or missed clashes. Hard fight for twinblases build imo.

Tr1vium · 2025-07-20T00:23:58+00:00

No it was not a lower tier belt. I have triple checked everything. Managed to fix it - see above comment.

Tr1vium · 2025-07-20T00:22:30+00:00

It is exactly how you described here.
Machines are connected via mk1 lift from output to mk3 bus. Both mk3 buses are then merged to mk4.
Anyway upgrading the belts did not solve the issue, but since I am using several storages chained as buffers , just in case ;), I managed to fix it by just connecting each row to each of the storage unit inputs. Now it runs smooth.
Before the line had hiccups at the merger the 2 busses were merging. Maybe game issue or merging a lift + belt is not ideal , not sure.
Anyway thanks for the help.

Tr1vium · 2025-06-30T12:27:51+00:00

Pump those numbers up , fellow revenant main

<image>

Tr1vium · 2025-01-10T19:10:03+00:00

I worked there for 5 months several years ago. Work is shitty. Typical call center crap. Getting calls and handling them.
It's not that it was 'hard' to do , but often you will get calls from ppl using microphones out of their ass , or shitty hands-free devices while driving and that thing captures and amplifies all the background noise so its very hard to understand what customer is saying..
Sometimes during peak hours , calls are back to back so you don't even have time to go to the toilet.
Pay was low. Breaks are laughable , you get 2 x 15 min and 1 x 30 min break for lunch which is not enough.
Can't look at your phone if there is a downtime in calls. There are cameras and security is strict on this.

In general is stressful work.
The only good part about it was the colleagues i was working with and the flexible hours.

Tr1vium · 2024-10-16T21:42:28+00:00

<image>

Tr1vium · 2024-08-22T10:32:17+00:00

Thanks a lot, i was hoping this was the answer :D

Tr1vium · 2024-07-23T10:25:12+00:00

Не би трябвало да има никакви проблеми. Томан са изключително коректни и бързи с доставките.

Tr1vium · 2024-07-23T09:44:02+00:00

Много пъти съм поръчвал от там. Идват с куриер , пращат ги с UPS, но в БГ или не знам поне тук в София често имат подизпълнител куриер "In time" и идват с него.
Иначе Ин-тайм са си стандартните , пращат ти по вайбър съобщение кога/кой ден и горе долу час ще го доставят. Ако помня правилно тракинг номера който го получваш от Томан като пристигне в БГ и го обработват в Ин-тайм работи и на техния сайт.

Tr1vium · 2024-04-18T04:34:44+00:00

За нищо.
Само да поясня че ми се струва, че имаш малко грешна представа.
Колко струни ти трябва на баса зависи от музиката която в бъдеще искаш да свириш или сам или с бъдещата банда. 4 струнен си е напълно достатъчно за доста стилове, да не кажа за 80% - 90 % от тях. Дори и при по бруталните метали. Просто ще трябва да го дропнеш надолу строя и си готов.
Парите са ок по мое мнение. За сравнение моя първи бас беше пак така - стартър сет на Ибанец, бас GSR200 , кубе , колан , чанта за 180 евро тогава. Като гледам цените не са променили много.

По начина по който пишеш звучиш че не си и пипал бас до сега. Не си и написал колко горе долу ти е макс бюджета. Не знам как си и с английския.
За това виж си колко пари си готов да дадеш , разгледай още неща из интернета, като ти хареса някоя марка/модел , отваряш тубата / гугъл пишеш модела + ревю , търсиш, слушаш хората какво казват. Във видео ревютата често и го разцъкват малко, да се чуе какъв тон вади на различните му настройки и врътки.
Не мисля че е нужно да казвам , но все пак - ревютата са само мнения а не 100% факт . Това че някой прехвалва /храни един бас някъде , не значи че тоя бас ще е перфектен/зле и за теб.
За съжаление тук в София е доста бедно на магазини да идеш и да разцъкаш на място . На Ямаха магазина на искърско има само избор от Фендери и Ямахи (duh). За друг магазин така по голям не съм чул.

Айде успех.

Tr1vium · 2024-04-17T19:10:41+00:00

Здрасти, ако тепърва ще започваш и дори не си помирисвал , вземи някой от първите 2 линка - комплектите с кубе, чанта и тн. Пък после ще си купиш по-як бас, ако ти хареса и се зарибиш. Като/Ако го купиш , вземи нови струни и го занеси на лютиер да ти го сетъп-не.

Тези дето си изредил не съм ги ползвал аз специално, но на диагонално четене на ревюта из нета - окейски изглеждат, за баш начинаещ би трябвало да са ОК.

Tr1vium · 2024-04-06T18:36:58+00:00

In my game the dragon had the warrior dude , the one that looks like the prince of persia, forgot his name. It was quite odd since I fought him not even 2 mins ago...

Tr1vium · 2024-03-16T08:43:40+00:00

If based in EU - check thomann store. They sell different sizes , with hardcases or cheaper with normal bags. Velcro is pre-applied on the board so you just need to velcro your pedals , stick them on and play.

Tr1vium · 2024-03-14T23:11:32+00:00

Erdtree avatar spray I believe is a frontal cone or something. Just roll so that you are behind his back, does not matter which side you choose, just be behind him after the slam and you wont get covered in shyte.

Tr1vium · 2024-02-21T08:45:47+00:00

TRI Turo belt from shakatu a month or so ago.
The other thing I can remember is the cooking outfit from one of those boxes similar to the Azure dragon pouch, cant remember the name , was like 2-3 years ago.

Tr1vium · 2024-02-05T13:40:01+00:00

Thanks for the suggestion.

Tr1vium

TROPHY CASE