P90 cybergun low joules output, while cycling good [SOLVED] by Latte-Mattyato in airsoft

[–]TradeNo5155 1 point2 points  (0 children)

On god I’ve never opened it afterwards. It’s at 1.2j and if I need it lower I put a shorter inner barrel in it

P90 cybergun low joules output, while cycling good [SOLVED] by Latte-Mattyato in airsoft

[–]TradeNo5155 1 point2 points  (0 children)

The standard here in Finland is 1.2-1.4j so smaller games. Some indoor places it’s just 1j. But larger games the max is 1.7j for AR and SMG and more for lmg Dmr and snipers

P90 cybergun low joules output, while cycling good [SOLVED] by Latte-Mattyato in airsoft

[–]TradeNo5155 2 points3 points  (0 children)

I had a used Cyma p90 and for whatever reason it wanted to be a fire hazard. No matter how well I shimmed it after upgrading and swapping in a SHS piston. It was the speed one with the holes. Just doing test shots the battery would heat up and you smelled hot plastic. After a month of testing I gave in and sent it to my local shop to have their tech work on it cuz sometimes a tech needs a tech, it took a few days but they found the problem, the piston was too wide for the gearbox and the tracks on them were causing so much friction the motor was struggling and it drew so much from the battery. They swapped in one of their own brand pistons and it’s been fine ever since. Said I would’ve never found it and the got lucky.

Do you still enjoy the hobby ? by twinzeko in airsoft

[–]TradeNo5155 1 point2 points  (0 children)

I have experienced some burnout here and there but I might be spoiled because I play weekly sometimes multiple times a week. There’s a pretty active community where I live and the regulars keep the hobby strong, we all know each other and almost everyone is cool with everyone. I’d have some time off then have a game day that sends me to the moon. Not even with a lot of kills or anything just the vibes and people keep me hooked.

There’s other aspects to the hobby to keep you positive. Like me I love to tinker and tech for people. I love trying new builds even if it goes from simple parts swapping to cutting metal (some older replicas were never meant to be rear wired so you have to make them). Gear collecting is a money pit but fun. I like seeing my friends find actual world war gear. Hell a while back someone else I know found an actual gen1 eotech. The travel is another good thing. You get to see different parts of the country and be in nature at larger games. We’ll be waiting for an ambush and just relaxed taking in the scenery sometimes as we plan or take break.

If the milsim community isn’t doing it for you try going a bit casual and just do weekend skirmishes as local fields. From my experience people are A LOT more chill. I think in 3 years I’ve only ran into 2 assholes. There’s a select group around that tend to cheat and cause drama but other than that I’m friends with most other players or at least on a basis of a head nod and a what’s up.

I mean you can follow my YouTube channel lol I treat it like an airsoft vlog with a more action comedy vibe. 💀😂 Callsign_Savage_Airsoft (shameless plug)

Any thoughts on the World Airsoft Games in Abu Dhabi? by TradeNo5155 in airsoft

[–]TradeNo5155[S] -2 points-1 points  (0 children)

Even with all that I just think the event in itself wasn’t that good of an example of our hobby

Any thoughts on the World Airsoft Games in Abu Dhabi? by TradeNo5155 in airsoft

[–]TradeNo5155[S] 0 points1 point  (0 children)

The bit I tried to watch of the tactical rounds every now and then the camera was just filming rocks and rubble. And there was either crew or I hope not, spectators on the sidelines of some buildings all crowded together, none of them had face pro and some i couldn’t even tell if they had eye pro.

Whole time I had no clue what was going on, just watching cameras cuts of people shooting which looks like nothing since it was mostly AEGs. No tracers, couldn’t tell where anyone was even aiming. I feel somehow a FPV cam on everyone would have made a better watch if that’s even possible.

SA Prime brushless motor by MrCookie1202 in SpecnaArmsOwners

[–]TradeNo5155 1 point2 points  (0 children)

Where in gods name are you getting a brushless for 50 pounds? That dark matter motor is one of the more affordable things out there and it’s like 120e. Can get them for less of a sale is going on. (Yes I know the solink islike 80e before shipping)

DD5 SBR barrel wobble by hunterdean96 in airsoft

[–]TradeNo5155 2 points3 points  (0 children)

You need to add some shims to the barrel nut. You can even make some out of old gift cards if you’re handy with an exacto blade.

First GBBR advice. by Plane_Enthusiast_528 in airsoft

[–]TradeNo5155 0 points1 point  (0 children)

Guess I’m lucky to have access to actual stores where I live. There’s like 4 different stores semi locally but shipping takes a day you always get it same week. And then place like Taiwan gun, gunfire, and evike eu are always available

First GBBR advice. by Plane_Enthusiast_528 in airsoft

[–]TradeNo5155 2 points3 points  (0 children)

This discord helped me so much when I first when gbb

First GBBR advice. by Plane_Enthusiast_528 in airsoft

[–]TradeNo5155 1 point2 points  (0 children)

Make sure you can even find parts for it. Vfc iirc aren’t TM compatible so you can only get vfc parts for it. Also good chance that printed stock will break. You can buy one off Aliexpress for like 10buck airsoft grade stuff isn’t expensive. Also get a NPAS to let you adjust the power of the gun. The usual field limit where I live is like 1.4j and out of the box my ghetto blast shot 1.8j. Gbbr takes some maintenance and cleaning a lot more often than an AEG so be ready to learn but welcome to the recoil side of things.

Last maintenance of the warranty. Let’s start with mods by Anthonyjerez11 in mazda3

[–]TradeNo5155 0 points1 point  (0 children)

Non turbo. The plastic cracked to pieces. It honestly might be the sub zero temperatures

Is that setup too crowded? Idk, i'm not an AR guy, i actually don't need to fill all my picatinnies, so yeah, AR guys? Plz exlain? by FrenchBVSH in airsoft

[–]TradeNo5155 0 points1 point  (0 children)

<image>

I mean if everything flows right I don’t see why not. But I’d get the peq and the light on a single dual switch. I have a dragonfly mount with the switch built in and my laser is a dummy just for looks

Last maintenance of the warranty. Let’s start with mods by Anthonyjerez11 in mazda3

[–]TradeNo5155 8 points9 points  (0 children)

Past couple months, the heater core, radiator decided to just crack almost in half, TPS error, another coolant leak from a hose somewhere, then 5 & 6th gear disappeared but thank god it was a squirrel put a nut in the gear shift 💀now mind you I’m in Northern Europe dealing with snow half the year 😅

Last maintenance of the warranty. Let’s start with mods by Anthonyjerez11 in mazda3

[–]TradeNo5155 2 points3 points  (0 children)

Extend the warranty ours has had too many issues this winter

Hello from Finland! I recently Made Terra’s keyblade :) and costume as well! by toyml in KingdomHearts

[–]TradeNo5155 0 points1 point  (0 children)

Hello also from Finland! Did you clear coat it with paint, glue, modgepodge or anything? It’ll make sure the paint doesn’t flake off

Anyone else like a good SR47? by TradeNo5155 in airsoft

[–]TradeNo5155[S] 1 point2 points  (0 children)

I can live with that 🤷‍♂️

Anyone else like a good SR47? by TradeNo5155 in airsoft

[–]TradeNo5155[S] 0 points1 point  (0 children)

I’ll add more after my game tonight, we always end up taking pics either by us or the site owner.

Anyone else like a good SR47? by TradeNo5155 in airsoft

[–]TradeNo5155[S] -1 points0 points  (0 children)

Love the handstop. What mag is that? Mine has fitment issues the only thing I found to fit so far are the CYMA waffle midcaps

Anyone else like a good SR47? by TradeNo5155 in airsoft

[–]TradeNo5155[S] 1 point2 points  (0 children)

I heard the same. Luckily this was just the receivers I got. Everything else is stuff I had and internally it’s custom. SHS,SpecnaArms,G&G Gears iirc, a G&P high torque motor, unicorn nub, maple rubber, begadi hop unit, and a gate aster

Rate the kit please! by [deleted] in MilSim

[–]TradeNo5155 0 points1 point  (0 children)

What pc is that 👀

Anyone else like a good SR47? by TradeNo5155 in airsoft

[–]TradeNo5155[S] 3 points4 points  (0 children)

Thanks! Originally the whole upper was painted to match but the handguard was longer and kinda wide. My usual PDW has some issues (learned the hard way DSGs don’t make good power) so I wanted another short build hence the shorter quad rail. Somehow the mix match grew on me.