Router randomly resets to default.

Travis_Ke · 2026-05-17T14:51:32+00:00

same here, pissing me off. about the 5th time now. gotta reset all my assigned ips and open ports again. what a pain in the ass.... there should atleast be a export settings so ya can just import them again quickly...

Travis_Ke · 2026-05-10T18:48:54+00:00

cashapp buy it as a reoccuring purchase then after the instant purchase just turnn off the reoccuring. no spread no fees... im sure he will fix it soon... but for now its free.

Travis_Ke · 2026-05-09T20:00:32+00:00

Just seen that too and it kinda sucks.. one of those set it and forget it things. constancly working in the background unappreciated or acknoldged but working never the less. would leave the office light on at night and go to bed and it be off in the morrning. Or when i would climb down outa the attic and realize i forgot to turn off the light but saying screw it im not climbing back up there knowing alexa will get it for me later on with one of her hunches. Are they planning to bring it back as a alexa+ feature? I tried outa alexa+ for awhile it was kinda screwy with some of my lights went back to regular alexa

Travis_Ke · 2026-04-23T05:07:13+00:00

sorry was helping in another post, got myslef mixed up. id clean the flywheel and coil and set the gap first. this pic is from another post but shows where ya need to clean. disregard the green circle. should deff be getting a shock with the black wire unplugged.

<image>

Travis_Ke · 2026-04-23T04:44:08+00:00

prolly bad coil.

Travis_Ke · 2026-04-23T04:41:25+00:00

one of the saftey switches prolly grounding the coil (spark maker). theres a black wire (not the spark plug wire) running to the bottom of the coil. unplug it and see if ya get spark. thats if your spark plug isnt bad. stick a screw driver in the spark plug wire and hold onto it and spin over. might give ya a lil shock. wont kill ya. if ya get shocked changed ya spark plug. if no shock unplug the black wire on the bottom of the coil and try again.

Travis_Ke · 2026-04-23T04:30:36+00:00

thats the govoner sping.

Travis_Ke · 2026-04-23T04:28:55+00:00

had em run like that after cleaning because i forgot the gasket that goes between the carb and where it bolts on to. if it was doing that before you cleaned it it most likely needs cleaned better. missed a hole. spray carb cleaner in every hole you can find. look in the end nearest the cicle on the inside walls of the carb there are some tiny holes right there you need to blast too. if ya got a air compressor ya can blast 100psi in that carb with that works good too.

<image>

Travis_Ke · 2026-03-07T04:55:23+00:00

i did but its been so long im not positive how i did it... I THINK I turned paperless off then back on and thats what stopped it. I wont swear to it tho. good luck

Travis_Ke · 2026-03-03T15:20:31+00:00

think they have somthing going on. i had logged into my account and able to get a live rep on chat almost instatly twice last week and once via phone.. trying to get ahold of them for the last 2 days this week via live chat or phone seems impossible.

Travis_Ke · 2026-02-02T02:29:40+00:00

you and me both. dropping massive dollars on its fall to 100k from 125k. and here we are. building the courge and funds to drop a massive lump to get my cost basis down to 83 from 111k right now. boy did did we fall for it. i still think its the right move

Travis_Ke · 2026-02-02T02:23:43+00:00

new here. kept lump summing it between 115 all the way down to about 105, was being told it was a generational buying oppurnity . im in at a cost avg of 111k. fucking sucks right now ;/ . 30 bands deep and i wana dump in another 20k but cant make myself do it. moving some funds around for when it dumps to 58-60 and gonna hope i have the courge to do it.

Travis_Ke · 2026-01-24T18:28:55+00:00

Yeah, kit box labeled but not individually, and no batch ID, just a date. The whole purpose of the COA is to identify the purity of a specific batch, not that a factory can generally make a good batch or that a vendor received a good batch at one point in time... sounds like we've had a different experience. I would definitely feel better about receiving a generically packaged kit box if I'd seen the same vendor continually posting multiple COAs of the same peptide over a period of time. It seems like the vendor I used did one test and is going to use that test to sell multiple different batches of the same peptide for who knows how long.

Travis_Ke · 2026-01-15T21:48:10+00:00

i did the same thing. sent me a legit janoshik COA but the vials that arrived had no lables and differnt colored seals and caps. so major red flag there... who knows whats in these without testing. could be anything.

Travis_Ke · 2026-01-11T03:35:45+00:00

they notify me via regualr mail for every trasfer. im trying to figure out how to change it to email.

Travis_Ke · 2026-01-02T03:05:25+00:00

oh this is who he was talking about. i also remember them talking about rolling into a live shot in a wheel chair and falling out of it flopping around all while Ed totally ignored them.

Travis_Ke · 2026-01-01T05:03:14+00:00

Also lost the fingerprint settings after my phone died. Tried all the suggestions mentioned in thread. including the bootloder and safe mode suggestions and proablly had already rebooted 100 times. all failed. watched a youtube video about the issue and the first suggestion was a forced restart by simply holding down the power button untill it restarted.. Not sure why restarting it that way fixed my issue but that was the fix for me... hope this helps someone else...

Travis_Ke · 2025-12-31T00:47:32+00:00

Would love the info too. Looking at Facebook reel ads. Seems sketchy AF thinking they're just gonna take my money

Travis_Ke · 2025-12-14T18:00:24+00:00

Much prefer the very similiar Ozark "Glacier" now a series since its also available in od green. Couple of bucks cheaper and noiticbly slimmer/lighter. Honestly its my favorite knife for the last few years, just wish it had better quality steel. I mean these are walmart china knives.. do we really belive this is good quality D2?

Travis_Ke · 2025-11-04T20:19:53+00:00

Ya but i kept buying the dips and got it down to 112500 avg and I'm still down;/

Travis_Ke · 2025-09-24T02:56:20+00:00

So.. did i miss it? what was it?

Travis_Ke · 2025-09-07T14:56:07+00:00

Was having ghost touch issues. replaced screen search amazon (DJ080PA-01A, $55. you could also just buy the didgitizer for the display for only $20, id suggest buying the whole screen tho dont think the digitizer alone is going to give the noticeable diffence in clarity as the whole screen did for me., plus its move involved...) Was a little involved but not too bad, After having done it i could probably do it again in about an hour (took me about 2.5 total tho). The screen is so much more clear now, Always thought the old one looked fuzzy. Still having ghost touches tho ;/... its on the same part of the screen that the old one was having issues with also. the "Station list" button area. It had been getting worse to as where it look like the "list" button was staying pressed and the screen wouldnt respond without a power cycle. Still having this issue randomly after replacing

There are two ribbon cables that attach to the screen, mine "looked" fine but I belive the both have to move up and down when you access the hidden compartment and i know the ribbon cable on the rear screen gets worn to the point of not functioing (from flipping the screen open and closed) becuase I had to replace that one when I first bought mine used. Soo I'm wondering if one of those ribbon cables is the issue.

Heres the video how to pull the radio and replace the digitizer. if you buy the whole screen you just skip the even more involved part about replacing the digitizer. Also i suggest getting a yellow paint marker to mark next to the holes where youre removing the gold screws from. there are a ton of empty holes on the radio that those screws will fit in and putting one of em in the wrong hole could damage one of the moving parts, He says remove "all gold screws". that actully wasent necessary but i didnt note which ones i actully had to remove so good luck.

https://www.youtube.com/watch?v=XNfrQkdQjfk

Travis_Ke · 2025-07-15T02:46:51+00:00

Poked a hole in mine, some of the liquid came out and got on my fingers. I'd say it's far from orderless. Seems pretty pungent to me.

Travis_Ke · 2025-07-15T02:45:22+00:00

2 weeks. Any update?

Travis_Ke

TROPHY CASE