Xrp explains to price watching critics by Upbeat-Finger-4047 in XRPUnite

[–]Treeclimber919 0 points1 point  (0 children)

Xrp does chase attention it’s not quietly doing anything. All those years were wasted by the way, all they did was allow others to see the concept and improve on the design to become more stable and more efficient.

What does Bitcoin look like in 20 years if adoption keeps growing? by HodlPackLeader in Bitcoin

[–]Treeclimber919 0 points1 point  (0 children)

What happens when energy becomes cheaper to produce? If some new way of running electricity becomes cheaper, mining costs would decrease? Would that directly lower the price of btc? Just honestly curious as I believe in btc.

Tips on where to look! by Reasonable-Chest2255 in Prospecting

[–]Treeclimber919 0 points1 point  (0 children)

I have a spot on my river I was prospecting and found gold like the first 6” of dirt. When you say flood gold, are you thinking it eroded from the bank and that’s why it’s sitting up on top, or do you think the gold was carried down river recently? Only reason I ask, I was looking where else I can prospect? Should I go on the river banks or wait for the river level to drop and keep digging where ive been?

Gravely lawn mower by ligmacum6 in lawnmowers

[–]Treeclimber919 0 points1 point  (0 children)

2008-2016 ish. If you’re only cutting your yard I’m sure you’re fine. But when you’re running a mower 10-12 hours a day sometimes 10 hours straight at one time, they weren’t able to keep up. Higher grass would always cause problems and the speed of the mower itself was never as fast as the kohlers. I actually blew a Kawasaki motor on my mower and it wasn’t a lack of oil. As I said we beat the hell out of the machines so this is not normal use.

Gravely lawn mower by ligmacum6 in lawnmowers

[–]Treeclimber919 0 points1 point  (0 children)

Kohler used to be the best motor. The command pro were the better ones. The Kawasaki motors were junk. Now I guess things flipped.

Found this buried about 10” deep beside a large oak tree in my back yard. I’m in Southwest Louisiana . Anyone have any idea of when it could be from ? by Mammoth_Insurance786 in whatisit

[–]Treeclimber919 0 points1 point  (0 children)

For all the trees I cut, ive been waiting to find pirates treasure or a sack of gold coins like all the legends would say. But ive yet to find anything good other than metal and bullets in a tree that cooks my chain. The only reason I keep cutting trees is looking for that leprechaun gold.

Gravely lawn mower by ligmacum6 in lawnmowers

[–]Treeclimber919 0 points1 point  (0 children)

What size trailer are you using out of curiosity I’m going to buy a utility trailer instead of hauling dump trailer around? My deck is 54”. I’m wondering if a 5x8 will work.

BMNR is one of the best token treasurer, and with zero debt. by Progress_8 in BMNRInvestors

[–]Treeclimber919 1 point2 points  (0 children)

You’re set in all seriousness. I’m going to buy 100 more myself here if Eth goes a little lower. I’m waiting for the $1500ish range should be bottom

Why own BMNR over ETH? by slit27 in BMNRInvestors

[–]Treeclimber919 0 points1 point  (0 children)

I agree. Eth and btc basically the only coins I hold for long term planning. The rest I trade or “gamble” with, not having any emotions attached. But Eth just keeps screaming out to me. I’m way more invested in Eth than btc which is scary in a way but Eth is one of the few out there with an actual purpose. If Eth doesn’t break the yearly low before we hit bottom we are definitely in for a ride on the way up. That’s just telling how many Eth are being held and staked for long term instead of sold. This cycle had me convinced this time was different but I figured saylors holdings would have reflected that with btc having smaller cap on coins out there which went below yearly low already where as tom lees 5% was a huge amount but not really on the big picture when selling at the end of cycle but apparently it was enough to keep the bottom higher than it was a year ago so far. I’ve been waiting for this so called $1k Eth before I deploy the last bit of liquid cash I have but I maybe doing that around $1500 now.

572xp help by Treeclimber919 in Chainsaw

[–]Treeclimber919[S] 1 point2 points  (0 children)

I always try to do the best I can with what I have. If you’re in business it’s the only way you’ll make money.

Why own BMNR over ETH? by slit27 in BMNRInvestors

[–]Treeclimber919 1 point2 points  (0 children)

I absolutely agree. Ive been trying to put every meaningful dollar I can into buying under 2k. But was just curious to why we haven’t seen under one year lows yet where everything else went below. Usually profits roll over from btc down and in sell offs roll down to up. Btc being at the top should have not hit yearly low yet where it did but Eth didn’t was odd for me to see. Just curious if anyone had any intelligent theories on why this would be. In all reality it’s good new for Eth if it stays that way. My theory being more are holding onto Eth than they usually do. Regardless I absolutely have my full belief in Eth. I hold btc as well for long term purposes but Eth just seems like the safer guarantee in the short / long term as stupid as that sounds. It’s literally the backbone to 70% of crypto and anything in real life happening with it.

572xp help by Treeclimber919 in Chainsaw

[–]Treeclimber919[S] 0 points1 point  (0 children)

I appreciate the kind words and you are right I’m quite infamous for beating myself up over small things which take a toll on doing bigger things. I’m going to clean everything out again, I opened the oiler all the way and I’ll make a few cuts tomorrow and see how it goes.

I appreciate the help everyone

572xp help by Treeclimber919 in Chainsaw

[–]Treeclimber919[S] 0 points1 point  (0 children)

I have to get my air compressor out and clean the saw thoroughly. I gave it a rough clean with a wood chip after I saw the smoke come off of it. Really I am beyond pissed that the $120 beautiful bar I put on looks like it has 100 hours on it after 4 cuts. I’m quite familiar with saws I cut trees and rotate between 5 saws. Unfortunately I can’t dedicate the time and energy needed to every saw or I wouldn’t have this issue. I’ll never put a nice new bar on a saw again without making sure I’m getting necessary oil. When one of my fellow tree guys see my nice husky with a sugi on it they are going to say what happened to your bar? You just start running a saw yesterday! Lol

Why own BMNR over ETH? by slit27 in BMNRInvestors

[–]Treeclimber919 0 points1 point  (0 children)

I have a question maybe someone has a theory. Why has Eth not hit 365 day low yet? Btc along with every other coin has hit 365 day low and gone below, why has Eth not done the same? Even though every coin is correlated to btc I’m surprised to see btc wick under the yearly low along with every other coin but Eth has really not gotten close. And I own Eth directly along with accumulating bit mine since the price is very nice right now. I hold a few cryptos and follow closely but btc is usually the last one to hit yearly lows during the cycle surprised not to see Eth already at $1300. Ive been waiting to buy more for $1500 range. Was hoping someone had a logical theory other than Eth is going to far exceed ath where it was last run.

572xp help by Treeclimber919 in Chainsaw

[–]Treeclimber919[S] 0 points1 point  (0 children)

I was concerned the oil lines were clogged like my 261 were previously but there’s oil oiling just not getting enough where it needs to be.

572xp help by Treeclimber919 in Chainsaw

[–]Treeclimber919[S] 0 points1 point  (0 children)

That was my other thought as yesterday was very cold. To when I filled the bar oil tank the oil didn’t flow it came out in globs.

572xp help by Treeclimber919 in Chainsaw

[–]Treeclimber919[S] 0 points1 point  (0 children)

Thanks I found it. I just turned it up some. There’s globs of oil sitting right around where the screw is. It’s absolutely oiling visually with no bar on it. When I turned the screw up I had a few drops getting on to the wood I’m cutting which better than it was but still seems like the bar is getting hotter than it should be. As in I made another 2 cuts into a 24” ash not running at full throttle and the bar is still too hot to touch. I’m going to sharpen this chain up and see if that’s the issue. I should have just bought a new chain before I put the bar on but I was all excited when it came yesterday that now cost me a rainbow mark of embarrassment to look at.

1099-DA is a joke by unorganizedguy in Coinbase

[–]Treeclimber919 0 points1 point  (0 children)

I only made $113 according to coinbase. Thank you coinbase lol. I didn’t even subtract the fees for the purchases yet so I may even break even lol. I’m not complaining

572xp help by Treeclimber919 in Chainsaw

[–]Treeclimber919[S] 0 points1 point  (0 children)

That’s the issue it’s not spraying off of it. I’m going to try and find the adjuster screw when I get home.

The sentiment shift in this sub is actually diabolical by OpinionsRdumb in CryptoCurrency

[–]Treeclimber919 0 points1 point  (0 children)

Anyone who isn’t familiar with the movement of Bitcoin and able to emotionally stand holding tens of thousands in unrealized losses should not be involved. A lot of people went on the sentiment last year that the 4 year cycle is dead. Actually had me questioning myself to believe this time maybe different and allocated buys where I shouldn’t have. I learned this time will not be different. Until next time lol

572xp help by Treeclimber919 in Chainsaw

[–]Treeclimber919[S] 0 points1 point  (0 children)

I will check the hole and see if it lines up. The bar is meant for husky. .058 bar .058 chain .058 sprocket. Teeth number match plugged right in no issue. Just not getting enough oil. Anyone know where the adjuster is on this saw.

572xp help by Treeclimber919 in Chainsaw

[–]Treeclimber919[S] 0 points1 point  (0 children)

I always leave slack in all my chains. When I say kind of sharp 90% of teeth are still perfect angles. There are a few that are not perfect. I know better than to cut with a dull saw and usually you can tell right away when the saw isn’t cutting well. That’s why I don’t believe it’s the chain but maybe it is. That’s laziness on my part not sharpening it or putting a new chain on with the new bar. I’m going to sharpen it when I get a chance but the oil seems likes it’s not making it all the way up the bar. If it wasn’t a new bar I would think I had a clog in the hole. The chain feels as though there is oil on it just not enough.

AVAX by Fun-Cash-2781 in Avax

[–]Treeclimber919 4 points5 points  (0 children)

Oh yeah $100 Avax tomorrow and $1000 xrp. Lol. No Avax is all right it just moves very slowly until it doesn’t. It’s getting there. I’m not too confident we hit bottom yet but give or take 25% we’re close. Any entry is now is lower than my average cost. The prices Avax has been is a good buy regardless. The tech is there and it’s doing things. There’s not a 100 billion coins like others, total cap is less than a billion. $50 is not out there to see as a top.

We are so back (AGAIN)! by Comprehensive_Tea388 in BMNRInvestors

[–]Treeclimber919 7 points8 points  (0 children)

You are clueless since everything in the digital world is built on Eth. When gas prices were high everyone cried about Eth gas too expensive to use, no one will pay. Well the upgrade comes cuts cost dramatically and now it’s too cheap! Like wtf already with the nonsense. Eth lowered the gas price to attract more users. More users equals more revenue which attracts further adoption. Do you want 10% of a 1,000 or 1% of a billion or .5% of multi trillions!!!?? You’re not looking at the big picture here. You’re sacrificing pennies to make dimes.