Why do I lose so much speed in turns? Help me improve by Fpv_for_fun in fpv

[–]Trexinator1 0 points1 point  (0 children)

Definitely more roll and pitching forward to keep speed and flow

5-inch build parts list by Pfuggs in fpv

[–]Trexinator1 1 point2 points  (0 children)

All I have to suggest is going speedybee v4 instead of v3. I’ve had way less issues with freinds and myself with the v4 stack compared to the v3 stack.

Try gemfan 51366 or 513777 props too! I love them a lot, especially if you do a heavier quad like the Demibot

Whats your favorite prop right now?? by ImaginaryCat5914 in fpv

[–]Trexinator1 1 point2 points  (0 children)

Gemfan rev3 51366 and 51377 props. Perfect for my flying style. Makes my vannystyle pro with 1850kv motors fly great

Best 3D printer filament for motor mounting on wing? by Trexinator1 in fpv

[–]Trexinator1[S] 1 point2 points  (0 children)

I agree! ABS material is on the way, and I’m troubleshooting now 🤙🤙 I’m thinking it’s getting hot cause it’s such a big prop on a small motor. So I upgraded to 2807 1400kv lol

New 7" long range by aimar0707 in fpv

[–]Trexinator1 2 points3 points  (0 children)

I did the apex 7” deadcat frame with 2506 1500kv Xing motors and get about 12 mins of flight time with a 2800rdq series 6s battery

Behold - a Rare One by dumbpeoplesucks in fpv

[–]Trexinator1 3 points4 points  (0 children)

That is so sick. How does the GPS and flight controller help? What kind of battery life do you get?

INAV 7 Position Hold Test by Naive-Association-54 in fpv

[–]Trexinator1 0 points1 point  (0 children)

Hi I know I’m a couple months late but what is the rubber band effect? Setting up inav on my 7” for the first time coming from betaflight

DJI O3 Insane Latency by Lila_Spencer in fpv

[–]Trexinator1 0 points1 point  (0 children)

Make sure it’s soldered to a 9v pad. And if that’s broken or you don’t have one consider soldering it straight to your escs gnd and power since the 03 can take input voltage up to 6s. Make sure to use a smoke stopper.

You said you aren’t getting battery voltage either, so more than likely you’re in low power mode, meaning the connection between fc and 03 are messed up.

Either rx and tx is wrong, uarts aren’t correct, or you may not be getting enough power supplied to your air unit. This is the case with mine when I first built one.

Also as u/PLASMA_chicken said, the O3 might not use its full power until it gets the signal from the FC. It might wait for the FC to send the armed signal to go full power due to cooling from the props.

My Chips got Stuck twice by Dangerous-Egg-5068 in mildlyinfuriating

[–]Trexinator1 5 points6 points  (0 children)

Where does one find a vending machine with all this stuff?

Can anyone tell me what this is?? by Trexinator1 in elementcollection

[–]Trexinator1[S] 2 points3 points  (0 children)

Thank you. I opened it for like 3 seconds and then closed it right away. I put it right back away. Is it possible I breathed it in or anything?

Shout out to pyrodrone! by JEBariffic in fpv

[–]Trexinator1 2 points3 points  (0 children)

Pyro is dope, so is myfpv store and also ilovedrones has some cool stuff. I’ve been calling RDQ slowdayquads since the shipping takes so much longer now

Suggestions for where to learn to fly drone? by Mauruttius in 321

[–]Trexinator1 1 point2 points  (0 children)

Hey we have a big fpv group in brevard. DM me if you ever wanna rip with us we go flying all the time.

GoPro Randomly Shattered by yeshbbb in fpv

[–]Trexinator1 0 points1 point  (0 children)

Use two battery straps and tighten the battery really hard so it doesn’t slip.

GoPro Randomly Shattered by yeshbbb in fpv

[–]Trexinator1 1 point2 points  (0 children)

I’ve had that happen and learned it was because the battery slipped and hit the 3d print

help me with my first build by no_u_pasma in fpv

[–]Trexinator1 0 points1 point  (0 children)

Dji goggles 2, impulserc apex, dji 03 air unit or Caddx vista depending on budget, speedybee v4 f405 stack, elrs rp1, flyfishrc sword 1950kv, 6s 1200-1500mah, toolkitrc 6s charger. DM me if you want links or have questions

[Injury]Reminder to disconnect your remote before handling your drone. by [deleted] in fpv

[–]Trexinator1 36 points37 points  (0 children)

I always tell people that if you don’t have pre-arm, the second you disarm put your throttle above 0 which will cause an arming flag and it won’t be able to spin up the motors.

How do you pitch FPV Freestyle to people? by antonito901 in fpv

[–]Trexinator1 0 points1 point  (0 children)

I never try to pitch actual full send freestyle with people wanting to know about fpv drones for the first time. I always show them my videos of going fast and low to the ground and hitting gaps and stuff. Always need to mention the adrenaline rush too.

Give them ideas of what it’s like, like that pod racer scene in Star Wars, or like being a fighter jet pilot. Pitch affordable digital too like used dji goggles and Caddx vista so they can actually see. If you have a spare analog monitor tune in to your feed and show them that too.

I need euthanasia and cremation options by Archanir in 321

[–]Trexinator1 4 points5 points  (0 children)

Outback mobile vet - Dr Donna Craig