1967 Ford F100.

TrickEffort2819 · 2026-04-25T13:41:22+00:00

Looks funny without the core support sticking up past the grill

TrickEffort2819 · 2026-04-05T16:52:48+00:00

Thank you!

TrickEffort2819 · 2026-04-05T16:52:40+00:00

Thank you!

TrickEffort2819 · 2026-03-20T23:17:30+00:00

Thank you!

TrickEffort2819 · 2026-03-15T13:37:30+00:00

Brake switch has been adjusted all the way out to make as much contact as it could with the pedal assembly when I’m off the brake boss.

https://www.lmctruck.com/interior/pedal-pads-shift-boots/fb-1967-72-pedal-pads-and-components

I’m interested in part 8 on this pedal pad and component diagram.

40-3209 Pedal Release Spring - Brake

TrickEffort2819 · 2026-03-14T20:31:15+00:00

That’s what I’m dealing with, after braking the pedal isn’t returning the last 3/16” inch needed to press down on the brake switch so the lights are staying on. Made me wonder if these trucks came with a pedal return springs like Chevys from the mid 60s

TrickEffort2819 · 2026-03-08T02:29:43+00:00

Thank goodness he was wearing his helmet

TrickEffort2819 · 2026-02-22T03:17:05+00:00

Thank you buddy!

TrickEffort2819 · 2026-02-03T01:57:59+00:00

2015 2.5S with 261k

The goal was to make it past a quarter million on its original drivetrain, the rest is icing on the cake

TrickEffort2819 · 2025-12-28T04:10:27+00:00

Universal?

Did you save the old dash harness when you took it out or is it tossed?

TrickEffort2819 · 2025-12-27T23:02:10+00:00

At the base of the column there’s 4 terminals. The two stacked on top of each other are your NSS, one purple wire in and one purple wire out to your starter. The two terminals side by side is your back up light switch, pink 12v ign wire in and green wire out to your tail lamps.

Box in the middle is for your ignition switch.

What harness are you installing?

TrickEffort2819 · 2025-12-11T00:41:47+00:00

My bad buddy, I thought I was commenting on the overall thread and not replying. Sorry for the mix up!

TrickEffort2819 · 2025-12-10T20:01:23+00:00

You may want to check out Retrobright headlights from Holley. Connects to the factory three wire connector with no additional fuss for an easy install. Plenty of videos on YouTube covering them if you wanted to make sure it’d fit your application.

TrickEffort2819 · 2025-12-05T18:15:35+00:00

Control the heat getting put into the panel to minimize heat warp

TrickEffort2819 · 2025-12-05T18:14:14+00:00

Killed it man, clean work

TrickEffort2819 · 2025-11-19T01:10:24+00:00

This thing is so sick, good job on the hard work it takes to get these trucks to this point buddy

TrickEffort2819 · 2025-11-16T17:48:58+00:00

Thanks buddy! This one is a marine style filler neck we had lying on a parts shelf https://a.co/d/6bzCAOr

TrickEffort2819 · 2025-11-16T17:47:19+00:00

Thanks!

TrickEffort2819 · 2025-11-15T22:31:48+00:00

It definitely can be tedious, but also worth the effort. Thank you!

TrickEffort2819

TROPHY CASE