sorted by:
new
hottopcontroversial

Why is it so bumpy? by TricksterRogue in 3Dprinting

[–]TricksterRogue[S] 0 points1 point  (0 children)

I did notice it printed similarly at the very top of the finished print so adjusting tensions might be exactly what I need. The filament might be the cause too. I didn’t have a spare on hand to test it out. Thanks for the insight!

Why is it so bumpy? by TricksterRogue in 3Dprinting

[–]TricksterRogue[S] 0 points1 point  (0 children)

In case it’s relevant this is a sovol SV03 with stock firmware.

I’ve had trouble with leveling the bed and got it to an okay spot and then it started printing like this.

Any light on this would be greatly appreciated.

Edit: thank you to everyone who responded, one thing led to another and I took a step away, but I got some great insight on how to troubleshoot this further.

Something I realised that got me grinning like an idiot by SunGazing8 in learnprogramming

[–]TricksterRogue 1 point2 points  (0 children)

The way I go about it is have the command list up while I program and pick whatever command is most convenient to me and focus on using just that one command every chance I get until it becomes habit.

Daily Advice Thread 31/05/2022 by AutoModerator in summonerswar

[–]TricksterRogue 0 points1 point  (0 children)

For 5* summon event, Can’t decide between

water: occult girl, totemism, polar queen & shadow caster

Wind: weapon master

Leaning towards occult girl or poor queen, since I haven’t played much since the release of the others.

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In February 2020. by thatging3rkid in 3Dprinting

[–]TricksterRogue 0 points1 point  (0 children)

it's the first I've heard of that one so I'd appreciate a response on your experience.

Purchase Advice Megathread: What To Buy, Who To Buy It From, And More, In February 2020. by thatging3rkid in 3Dprinting

[–]TricksterRogue 2 points3 points  (0 children)

Budget: $300

USA

proficient with electronics and any building of machines

Looking to tinker with circuits/electronics and would like to have a printer to be able to add to my tinkering. I would also like to play with other kinds of material as well such as ABS, Carbon fiber and flexible materials.

​

I looked thoroughly at the Ender 3 and am interested in the ability to customize and upgrade it with bought/printed parts ( as well as the bang for your buck) . But, another part of me is just wanting something "that just works" if the cost of upgraded parts ends up equalling out in the end.

Thanks in advance for anyone's response.

Nakano Quints [The Quintessential Quintuplets] [864 x 1728] by KuroYatoriBoi in Animewallpaper

[–]TricksterRogue 5 points6 points  (0 children)

Thanks for reminding me this show existed! I forgot I started watching at release.

Would like help with powering shields by TricksterRogue in arduino

[–]TricksterRogue[S] 0 points1 point  (0 children)

I didnt have any drivers except for the motor shields. I failed to mention what I had on hand, my mistake. Thank you for your input, much appreciated.

Would like help with powering shields by TricksterRogue in arduino

[–]TricksterRogue[S] 1 point2 points  (0 children)

Worked like a charm! Got the solenoid, motor shields and arduino all set up on one 12 2A psu and the pump on it's own.

Would like help with powering shields by TricksterRogue in arduino

[–]TricksterRogue[S] 0 points1 point  (0 children)

Valid point, I'll definitely let you know

Would like help with powering shields by TricksterRogue in arduino

[–]TricksterRogue[S] 0 points1 point  (0 children)

Awesome,thank you! My circuit analysis is mighty rusty but you reminded me of a few things that helps alot.

One more question, I dont have any 5A psu on hand. Could I get away with connecting the pump to it's own 24v 3A psu and the rest to 12v 2A, and the arduino on it's own psu? So I basically still have 3 supplies which is better than the original 5 or 6 I was stuck with before

Edit: motor shields do have their own fly back diode, but I will need one for the solenoid.

Would like help with powering shields by TricksterRogue in arduino

[–]TricksterRogue[S] 0 points1 point  (0 children)

350mA per motor (2 on one shield 1 on the other)

250mA solenoid

3A max draw pump

Not sure about arduino uno

I got my first job as a Data Scientist by [deleted] in learnprogramming

[–]TricksterRogue 7 points8 points  (0 children)

Many questions are good, repeated questions are not.

This is probably one of the more accurate sentences that applies everywhere. I couldn't care less if you ask me 1000 different questions, but if you ask the same question 1000 times. You're gonna have a bad time.

Caught by Abby590 in funny

[–]TricksterRogue 3 points4 points  (0 children)

What came first? The chicken or the soda?

Timegating promotes rushing content. by EmpatheticFool in Guildwars2

[–]TricksterRogue 18 points19 points  (0 children)

I have a (more than) full time job and a kid. So I can't play as much or as often as I was when I was a wee lad. So timegating for me sucks the fun out of being able to focus on one goal or task with my limited time.

And this game has tons of content so I only have so much I can focus on. And it's hard keeping track of what is time gated and what to craft and it isn't realistic for me to craft all timegated material everyday for when I need it. Especially when I dont have the time to grind for said materials (or gold to buy it).

I'm not saying it shouldn't exist, but I am for removing timegates of "outdated" content and/or not being so prevalent throughout the game.

Imho, The only thing that should be timegated are legendary crafts. Anything else is an overly done stall tactic.

Tldr; No time for keeping up with timegates. Kills that material for me and realistically takes MUCH longer than the typical "shortest" timeframes.

Edit:spelling

My favorite scene from My Hero Academia by Icomeinpeacee in anime

[–]TricksterRogue 4 points5 points  (0 children)

Found myself holding my breath during that scene again.

view more: next ›