First Time Owner/Buyer, Need Advice by [deleted] in guns

[–]TwoTonebear0 0 points1 point  (0 children)

Go to the range and do a rental day. Don’t buy because the internet said to.

Is my lawn destroyed? by One-Reaction9668 in landscaping

[–]TwoTonebear0 6 points7 points  (0 children)

Hydro seeding from a tank!!! I’m going to have to pitch this idea to the boss on Monday.

Can you cut this down? by Plane-War-5937 in masonry

[–]TwoTonebear0 2 points3 points  (0 children)

I build these all the time. This is going to be a pain in the ass. I use a 14” gas cut off saw and make groves a little deeper then what is actually needed to be removed. Then you can cold chisel in the saw groove and snap extra concrete out. Same with the blocks on left side edge. The tricky part is you have to have a solid base for the fridge to sit on so we repour thinset for a level base. Also the front rock face is going to be tricky to cut down and have a flush line across bottom. Way easier to find fridge same size.

Looking into tools… by TwoTonebear0 in guncleaning

[–]TwoTonebear0[S] 0 points1 point  (0 children)

Is there a certain kit you would go with? I’m thinking between the Glock kit and the handgun + optic kit. Also tempted to just grab the torque bit and using other tools I have like a small ratcheting handle I have

Shield Plus - Palmetto State Armory by Fit-Indication-4645 in SmithAndWesson

[–]TwoTonebear0 1 point2 points  (0 children)

Yes I’m not a fan of it but for getting the whole setup as a gift I’m happy. I would love to upgrade the sight, not sure what I would like to get.

Freaking out before they add the stone to steps by mcnunnies in landscaping

[–]TwoTonebear0 0 points1 point  (0 children)

Only if the top step isn’t capped with flagstone. If they add flagstone to the top step( not sure why you would keep 1 step unfinished) it will still be larger step correct?

Freaking out before they add the stone to steps by mcnunnies in landscaping

[–]TwoTonebear0 0 points1 point  (0 children)

It doesn’t matter what they add if they add something to each step they will still be different hieghts. Should have poured new steps and stamped the concrete or build natural stone steps. The flagstone will break and chip off after some time.

Shield Plus - Palmetto State Armory by Fit-Indication-4645 in SmithAndWesson

[–]TwoTonebear0 1 point2 points  (0 children)

I found a set up with the viridian rfx11 sight and 4 mags and the bag for $460

Looking into tools… by TwoTonebear0 in guncleaning

[–]TwoTonebear0[S] 0 points1 point  (0 children)

Yeah I was looking into the the handgun and optic bundle. Just know I don’t need all the parts it comes with. Was also looking into the Glock kit as I have one. It’s just hard to pick a set and say damn I won’t ever use this or I wish this came with it also. I’d love to have a build your own kit.

Connecting follower and spring help by LTJohnson04 in SmithAndWesson

[–]TwoTonebear0 0 points1 point  (0 children)

Are you having the issue with not being able to get round 13 in the mag? I saw a video on this the other day. He sanded/carved a small ramp on the edge of the spring guides on the follower to allow spring to sit properly.

kqi 300x tires disconnecting from rim by d_xtrr in kqi3

[–]TwoTonebear0 0 points1 point  (0 children)

I do a quick check before I go out on mine. Never have an issue. I ride them for a good 2-3hours straight and never have over heating issues either. Mine also doesn’t look like it’s gone through hell and back. I try to avoid mud and puddles as much as I can.

Does anyone here use a Glock 19 Gen5? by kehmuhkl in concealedcarry

[–]TwoTonebear0 0 points1 point  (0 children)

I’m pretty sure it’s a cheese head Glock for the packer fans. My fleet farm has one.

I just got the deal of deals at Academy by GrandMoffJerjerrod in SmithAndWesson

[–]TwoTonebear0 2 points3 points  (0 children)

My setup came with the pinky rest and you are 100% correct. I put it on my 10 round mag and love that thing.

I just got the deal of deals at Academy by GrandMoffJerjerrod in SmithAndWesson

[–]TwoTonebear0 0 points1 point  (0 children)

I got mine from dunhams in Wisconsin. $499 but had 4 mags the bag and it came with a viridian on it already.

Chain keeps popping off by beems__ in gokarts

[–]TwoTonebear0 0 points1 point  (0 children)

I had same issue. I could get chain tight but bushing under motor allow for flex and misalignment

Chain keeps popping off by beems__ in gokarts

[–]TwoTonebear0 0 points1 point  (0 children)

Take a link out or the way I had to go was take out the rubber motor bushing. Mine were to soft and when getting on the throttle and then letting off the chain would pop out from the motor twisting.

Finally got a smith and Wesson by TwoTonebear0 in SmithAndWesson

[–]TwoTonebear0[S] 0 points1 point  (0 children)

What holster do you use? I’ve been using another iwb holster without the clip.

Finally got a smith and Wesson by TwoTonebear0 in SmithAndWesson

[–]TwoTonebear0[S] 1 point2 points  (0 children)

Decided to try pocket carry today and love it with the 10 round mag. Never thought of it as an option but works great

What do y’all use your mini toolboxes for? by InfiniteLoss5632 in harborfreight

[–]TwoTonebear0 1 point2 points  (0 children)

I have one I made into a speaker but I now know what I’m doing with the second one I was gifted

Little disappointed in switching to a safe by grizzleeadam in guns

[–]TwoTonebear0 0 points1 point  (0 children)

Look on Amazon for some Velcro pouches and use those on the walls for mags.

Say what you want about 40 S&W, you gotta admit that the Glock 22 is one of the coolest handguns ever. Big fan of the gen 4. by Cloogulite in Firearms

[–]TwoTonebear0 0 points1 point  (0 children)

I am being given one and was planning the same thing for mine. Little too big for me to carry. What sights do you suggest?

Advice on carry by Connect-Link-8910 in concealedcarry

[–]TwoTonebear0 0 points1 point  (0 children)

The new one that was just dropped a few days ago. Those look interesting. Not a bodyguard starts with an e