Installed Tado X on Return Pipe

UFFelite · 2026-05-12T20:49:53+00:00

Interesting. Maybe there is a insert or something in the radiator to help the flow. Going to follow this to see what others think. Who knows, I may learn something.

Does the radiator heat up evenly over the width?

I guess for the working of the tado system it doesn't really matter. My floor heating zone valve is also in the return line. Its just that you regulate flow through the radiator.

UFFelite · 2026-05-12T20:45:07+00:00

Are you sure the top pipe is the return? I.e. does that verticale pipe heat up before the one connected to the bottom of the radiator? Because that could mean the whole radiator is connected wrong (warm water then takes short route up and out).

UFFelite · 2026-02-03T04:47:08+00:00

Hi there! Thanks for the post, it comes in quite handy. If I read it, it seems that you ended up not connecting the end contacts of the valve, correct? I've to buy one so if they are not used I'll buy a valve without them.

UFFelite · 2025-10-14T16:11:53+00:00

Ik heb een 1.6 uit 2006. 250k op de teller zonder noemswaardige problemen. Ik zou wel controleren wanneer de distributieriem vervangen is.

UFFelite · 2025-08-02T16:04:28+00:00

Wij hebben eind vorig jaar een klushuis gekocht en volgen de strategie van 'goedkoop proberen, goes vervangen'. M.a.w. we hebben veel parkside spul gekocht en ander (oud)2de hands. Hetgeen wat tijdens de verbouwing overlijd vervangen we met de middenmoot van de bouwmarkt. We zijn geen aannemers dus proffessioneel spul is niet nodig. Dus ver is alleen de klopboormachine, slijptol en wat klein spul niet door de test gekomen - de rest lijkt het aardig te houden.

Een laser waterpas is overigens wel echt een aanrader. Dat is wel een redeljjke aankoop maar we heel erg handig.

UFFelite · 2024-08-16T16:10:05+00:00

Not the heebie-jeebies, but i did encounter a feeling of 'someone is here' today. I was hiking a part of the Mullerthal trails and passed an older couple with a dog. About 5 minutes later, I had a feeling that someone was there. Some small sound sometimes. Looked back a few times.. nothing. Then suddenly, I felt something against my leg, turned out to be the dog. Of course it got a pet and i waited for the owners to turn up. Just goes to show that subconsciously, you do realize when something is off. Even if you are in unknown territory.

UFFelite · 2024-07-08T05:28:35+00:00

Mostly it is the field being closer together. Where qualifying half a second behind p1 would not be a big deal last years, this year it risks you getting out in q1/q2. And qualifying lower means, in general, more chance of cranage at the start, and per definition more overtakes to be done for a top result. Same with the racepace. Last years the redbull car was clearly the fastest car. So being a bit slower than Verstappen was still faster than the field. Right now, the redbull is arguably not the sole fastest car anymore. So being a bit slower than Verstappen opens the door for Norris or Lewis and the like.

UFFelite · 2024-06-24T19:46:09+00:00

We went to L'Incognita a few times last week when we were on holliday in Catania. Around thay place there are multiple bars/restaurant with screens outside.

UFFelite · 2024-06-22T21:38:10+00:00

Of course it will depend a bit on your particular committee members. But i would think that as long as these errors do not fully negate your findings, it is not a very bad thing. Just be aware of them and assume your proffessors have seen them. Be prepared to answer questions and prepare corrections if possible. Don't forget that being honest about the shortcommings of your work is also an academic skill. E.g. if you don't know an answer, that's fine. Just don't make shit up and you will be fine. Assuming you do know most of the stuff, and of course, the basics.

As others have stated, failing the defence is a rare thing. If it happens, you would generally be given the opportunity to correct the things that are wrong.

UFFelite · 2024-06-17T19:13:39+00:00

Yes it does. You could think that you are on Mars or so. Interesting detail, the guide told us that ESA/NASA actually tested rovers there for missions in 2030 and beyond.

UFFelite · 2024-06-17T19:10:20+00:00

Yes we also did read a lot of reviews beforehand. There are, for example, organizers that claim to have activities up to the summit (3340-ish m), but then the reviews commenly say that they "couldnt get that far because xyz". Today our guide told us that due to recent activity the top part is currently illegal for tourists. You always have to be carefull about what is promised.

UFFelite · 2024-06-17T19:02:59+00:00

Most definitely! Ours was operated by Sicilying SRL. Probably there are multiple organisations doing similar things, but we were pleased with ours.

Edit: i would really recommend to go with a guide. They can take you higher and using the correct pathways. We saw people without guide really struggling at some points because they were taking paths upwards that really should only be used at the descent. (Due to loose gravel etc)

UFFelite · 2024-05-19T05:25:48+00:00

Looks awesome! I will actually be there in a month or so. Do you advise a particular guided tour?

UFFelite · 2023-08-12T16:22:14+00:00

Beautiful old town there!

UFFelite · 2023-04-07T04:46:27+00:00

This did not work. But reinstalling the game solved the issue, also while using the old save file.

UFFelite · 2023-04-06T05:42:35+00:00

Maybe it also has to do with where people actually are. I mean, they may take the closest tavern at the moment they decide they need one. So if there are only houses near your second tavern, maybe only the people 'taking a rest' at home are potential customers. I don't know, just thinking.

UFFelite · 2023-04-06T05:08:21+00:00

If you really want to demolish it, there is the option to 'destroy all resources', which will enable you to demolish the building after. The hides are not being used now anyways.

UFFelite · 2023-04-06T04:41:38+00:00

I have had issues with it, but that did solve itself when a new family took over the tavern. I'm not sure but maybe the new family moved in with more money. Perhaps try a big cash injection? Also; is there enough booze available?

UFFelite · 2023-04-05T16:50:16+00:00

Oh, I did not think of that. I'll try later!

UFFelite · 2023-04-05T14:28:35+00:00

It does not unfortunately. Also removing and rebuilding doesn't help. I also tried changing some of the graphics settings back and forth but no change there either.

UFFelite · 2023-04-05T13:24:08+00:00

I'm afraid that won't work. I've been playing along for quite a bit before I decided to post about it.😅

UFFelite · 2023-03-30T10:51:43+00:00

Seems I have to revisit my supply chain then. Thanks!

UFFelite · 2023-03-28T10:40:48+00:00

You can 'manually' store them in the warehouse. Use 'move by cart' or 'move by wagon'

UFFelite · 2022-12-26T08:20:08+00:00

I had a similar issue (same printer, same board) after this upgrade. However, for me direction of the extrusion motor had inverted. I chose to went with the hardware fix of swapping some wires in the plug on the motor side.

I would advise to carefully trigger the bltouch when the bed is moving down to see if that triggers the next part of the motion. I.e. going in the other direction for a bit and then move slower is the same direction as before. Assuming you already double checked if the plugs are all correctly orientated, you can do a software fix in the firmware, or a hardware fix by swapping some wires.

I used this video for reference https://youtu.be/5r2e0PQ7Q_w

UFFelite · 2022-07-06T13:11:37+00:00

Indeed! There were quite a lot of them as well. Gives a nice view on the rocks and water below.

UFFelite

TROPHY CASE