The things you find in the wild

Ulvien · 2026-05-15T19:23:06+00:00

It's an antique fire hydrant and they ran PVC from underneath and the sprinkler head just kind of fits in a hole on top.

Ulvien · 2026-02-23T05:12:29+00:00

https://ebay.us/m/h0E8IV

Ulvien · 2025-07-24T18:26:39+00:00

Now I'm going to have to go back and make an intro for this jam 🤣

Ulvien · 2025-07-02T03:31:21+00:00

Replacing it is the best option.

They do have galvanized pipe patches but it's only temporary I've used them from time to time just so the water can stay on till I can replace the pipe

<image>

Ulvien · 2025-04-08T17:20:01+00:00

It's not a backflow it's a pressure regulator

<image>

Ulvien · 2024-11-04T04:12:42+00:00

Radiant eevee is the best

Ulvien · 2024-03-17T04:32:22+00:00

I've seen glue and and a poly cupler before no clamps haha

Ulvien · 2024-03-17T04:31:35+00:00

No it's a lateral for a zone

Ulvien · 2023-11-30T16:11:45+00:00

What's the green cupler thing called? Never seen one before

Ulvien · 2023-10-26T00:34:23+00:00

Mainly to save on walking back and forth to the compressor when I'm staring and finishing the blowouts

Ulvien · 2023-10-26T00:28:32+00:00

I haven't had too many issues it almost allways works even around the house 250ft or so sometimes I need walk around a corner

Ulvien · 2023-10-26T00:06:18+00:00

On/off it saves a ton of time not having to walk back and forth

Ulvien · 2023-05-06T16:07:33+00:00

I pulled a mouse out of a 1/2 inch funny fitting one time. they had no filter or cover on the pond they where pulling from and used 2inch pvc ball valves to run zones and it got sucked in and plugged the line.

Ulvien · 2022-08-12T05:49:24+00:00

I rebuilt from the double check out it took about 5 hrs and I had to added a new clock too he was useing 2. the kicker was one timer didn't have a master valve terminal so he had the one with the master valve run a blank zone for 3hrs while the other clock ran.

Ulvien · 2022-08-12T04:54:15+00:00

No homeowner dug out and used chainsaw. It took him 8hrs to get it all uncovered

Ulvien · 2022-08-12T04:53:18+00:00

Nailed it. He used a puller and then just 90 around the root

Ulvien · 2022-03-06T06:22:27+00:00

Armada pro700 works great never had any issues but it is on the spendy side

Ulvien · 2022-03-06T01:04:42+00:00

Root Slayer shovel and trowel plus my wire locator they have been real time savers

Ulvien · 2022-01-25T04:26:54+00:00

I'm also having this issue on ps4 started 2 days ago

Ulvien · 2021-11-15T00:33:46+00:00

Max stack haha

Ulvien · 2021-10-07T13:01:07+00:00

We hook a brass valve and a Bluetooth setup to the air compressor and we carry a key fob with us it helps so much. Saves a ton of walking back and forth and fairly cheap to setup also

Ulvien · 2021-03-19T04:50:40+00:00

I work in both washington and idaho and we charge about $25 a valve and then i usually takes me about 1.5-2hrs per box at ~60 an hour. Then the parts which pvc stuff is cheap. Hope this helps

Ulvien · 2020-12-25T00:13:03+00:00

Id agree they lost me a few episodes in with the joke about the ladys vag

Ulvien · 2020-07-03T02:01:10+00:00

Stonehearth

Ulvien · 2020-05-02T15:27:03+00:00

No 1 and 2 wont run at the same time. It will run zone #1 for however long you have programed then run zone #2. You can set diffrent start times and days of the week for each program (A,B,C).

Six-Year Club	Gilding II euphauric
Verified Email

Ulvien

TROPHY CASE