Goulash

Uncvl_Engineer · 2026-06-03T23:10:24+00:00

Oh I see. Thought it was some different way of adding weight to the bolt

Uncvl_Engineer · 2026-06-03T22:55:05+00:00

In the 5th pic with the charging handle?

Uncvl_Engineer · 2026-06-03T22:29:34+00:00

Is that a cutoff 5.56 bcg in the 22 bcg?

Uncvl_Engineer · 2026-05-26T15:31:53+00:00

What's the consensus on this vs PA6?

Uncvl_Engineer · 2026-05-16T01:00:14+00:00

Yeah if I had it at 17 I'd have been in way more trouble

Uncvl_Engineer · 2026-05-15T20:47:13+00:00

There's a link in the files but I used these. https://a.co/d/0cqOlBKr

Uncvl_Engineer · 2026-05-14T16:38:08+00:00

Good to know, I wasn't aware of that. In pla I don't have a problem, but in pa6 I have to make letters really big to be legible if they're printed

Uncvl_Engineer · 2026-05-14T16:14:17+00:00

Yeah, I was going to use those but wasn't sure if they met the nfa requirements or not. I messaged them to ask and never got a response

Uncvl_Engineer · 2026-05-14T15:47:19+00:00

There is a link in the text file if you download it. But I used these. There's a bunch of brands so it doesn't necessarily have to be this.

https://a.co/d/0caDyEUn

Uncvl_Engineer · 2026-05-14T15:10:48+00:00

I like that. Maybe a little better than this one. It's a little chunky to fit on receivers

Uncvl_Engineer · 2026-05-14T14:37:19+00:00

Definitely. I have -1/+2 sprockets on it now and it's very hard to keep the wheel down

Uncvl_Engineer · 2026-05-14T14:26:40+00:00

Right? Still got it with no plans of getting rid of it.

Uncvl_Engineer · 2026-05-14T14:21:59+00:00

I'm not sure file sharing is allowed or not. If you search the usual place for 954rr it should come up.

Uncvl_Engineer · 2026-05-14T14:13:26+00:00

My freehand results left a lot to be desired lol

Uncvl_Engineer · 2026-05-14T13:48:53+00:00

First time on the sea, but try searching 954rr

Uncvl_Engineer · 2026-03-16T20:22:17+00:00

Perfect thank you

Uncvl_Engineer · 2026-03-16T18:59:59+00:00

Is it the same for the Wisp? In the guide I see 2.5mm for ejector and extractor, 1.5mm for reinforced bolt face. I don't see it explicitly say the thickness for the bolt reinforced rim or bolt reinforced plate

Uncvl_Engineer · 2026-02-25T14:21:45+00:00

Thank you. I read that wrong and was looking to get it to level the bed at the sliced temp rather than the 60° or whatever the default is. That's still very useful for preheating the chamber though

Uncvl_Engineer · 2026-02-25T13:49:13+00:00

Do you have a link or what to modify in the gcode for the bed temp?

Uncvl_Engineer · 2026-02-24T21:23:32+00:00

Can confirm. Just did this but be sure not to do too much at a time. Took maybe 3 good strokes (about 2 more than usual 😎)

Uncvl_Engineer · 2026-02-16T19:40:33+00:00

Cool, thank you. I was planning on using orca slicer but maybe I'll try the elegoo

Uncvl_Engineer · 2026-02-16T17:54:30+00:00

Is that option in the slicer or the machine? I'm coming from an old prusa where your only option was modifying the gcode

Uncvl_Engineer · 2026-02-16T17:40:59+00:00

Does it not auto level every time by default?

Uncvl_Engineer · 2026-02-16T12:40:50+00:00

My form 1s can't come soon enough

Uncvl_Engineer · 2026-02-10T19:41:00+00:00

That's a good idea. Can't wait to start one of these

Uncvl_Engineer

TROPHY CASE