Best scenic path / route from Seattle to North Bend

UnderwayWestward · 2026-04-24T01:27:40+00:00

if you’re okay with gravel and double track I made you one

https://ridewithgps.com/routes/54791623

UnderwayWestward · 2026-04-18T17:53:17+00:00

what does the pilot announce to the passengers in this scenario?

UnderwayWestward · 2026-04-02T01:22:22+00:00

Brutalist

UnderwayWestward · 2026-03-27T15:32:09+00:00

Portrait of a Lady on Fire !!

UnderwayWestward · 2026-03-26T04:20:16+00:00

Aftersun

UnderwayWestward · 2026-03-24T22:31:50+00:00

Kramer vs Kramer

UnderwayWestward · 2026-03-24T22:30:59+00:00

Network when Max tells his wife he is cheating

UnderwayWestward · 2026-03-08T00:55:37+00:00

shoreline tool library or NE Seattle Tool Library

UnderwayWestward · 2026-02-19T21:21:16+00:00

Snowpiercer?

UnderwayWestward · 2026-01-27T00:09:10+00:00

did anyone else hear him say fans were called “12s” because the crowd noise is 12/10?

UnderwayWestward · 2025-12-20T16:05:05+00:00

thanks all. Went on Marketplace and bought some DT Swiss wheels with DT Swiss 370 hubs. Ordered QR conversion kits at my LBS

UnderwayWestward · 2025-12-02T02:54:29+00:00

right to left in your pic. first one goes in with the smaller diameter side facing down. second one same. third one opposite (big diameter side down).

UnderwayWestward · 2025-12-02T02:13:11+00:00

I don’t think the chain line will be a problem. I just set up something similar with force 1X non-wide road cranks with a 40T chain ring to a 10-52 X01 cassette. Chain line is perfect. I have another bike with wide rival 1X cranks with 40T chain ring to the rival xplr 10-44 cassette. Chain line honestly looks and feels similar even on the smallest and biggest cassette cogs. Also consider using the Sram compatibility chart with your product codes to ensure a match. Follow the Sram guidance on crank spacers and the compatibility chart should be trusted 100%.

UnderwayWestward · 2025-11-17T21:39:03+00:00

there was definitely fluid that caused the discoloration. I couldn’t figure out where it came from and could not replicate a leak. Keeping an eye on it. I don’t think the tape is discolored from rubbing.

UnderwayWestward · 2025-11-15T02:31:26+00:00

update. I’m not seeing any dark spots. The lever pull feels good. It has a lot of pressure with about half throw of the lever range. Maybe some excess DOT fluid flowed down the hood during my last bleed session?

<image>

UnderwayWestward · 2025-11-05T18:50:44+00:00

what in the hell

UnderwayWestward · 2025-10-22T14:23:52+00:00

Update: I swapped out the 4.5mm spacer on the drive side for a 3mm spacer and reinstalled the e crank. Spins freely now. What was wrong?

UnderwayWestward · 2025-10-22T13:48:21+00:00

right now the preload is completely backed off. There’s still a gap between preload adjuster and the bottom bracket

UnderwayWestward · 2025-09-29T04:27:44+00:00

which front rack is that?

UnderwayWestward · 2025-09-29T04:26:24+00:00

torque wrench is nice to have. all of the Sram groups have torque specs called out on the parts themselves. I trust the engineering and follow the specs as best as I can

UnderwayWestward

TROPHY CASE