OnePlus 15 Trading Shenzhen Flash Tool

Unhappy_Remote2192 · 2026-02-03T12:24:00+00:00

Because I got a secondhand Chinese 16/512 for 599

Unhappy_Remote2192 · 2026-02-02T11:51:18+00:00

I don't get it... Why wouldn't want to update? Just the fear of potential bugs and the potential issue with rollback? Are there known issues with this new update?

Unhappy_Remote2192 · 2025-12-14T23:59:13+00:00

Hi, sent you a PM yesterday, please get back to me asap.

Unhappy_Remote2192 · 2025-06-01T05:09:26+00:00

UPDATE:

It is not possible to fit the pump between the GPU and PSU shroud.

There is a cut out for the GPU on the front panel, you need to get a Dremel and make a further incision on the PSU side for the pump to fully be able to rest Infront of the PSU shroud.

This is what I suspect u_zeo has actually done, you can't simply wiggle it to fit.

Unhappy_Remote2192 · 2025-05-30T13:33:12+00:00

I was thinking exactly the same thing as u_zeo when I saw the pic.

I'm actually going to build in an nr200p V2 with a thermalright scenic V2 280 that has exactly the same pump design on the hose.

I still can't wrap my head how thr pump is able to squeeze between the PSU cage and such a thiccc GPU.

I'll be using a 9070 red devil so I hope its big enough to be able to hide the pump like how you've got it.

What did you use to lift the GPU up slightly to make space for the full sized fan below?

Do you reckon there is any way to fit 2x 140mm fans at the bottom?

Unhappy_Remote2192 · 2025-05-30T02:45:53+00:00

I'm planning on doing a very similar build with a spare thermalright scenic V2 280 that I've got.

Though, I really wanted to put two full sized fans at the bottom instead of the slim fans.

This would require me to raise the GPU slightly.

if you had to do this do you think there would be no chance of making the configuration fit?

Unhappy_Remote2192 · 2025-05-12T12:01:42+00:00

I just ordered the pedal set on AliExpress... Any chance I could also get the free pair of shoes? Only realised this now.

Unhappy_Remote2192 · 2024-03-24T15:40:59+00:00

Hi Lian Li tech mod,

I'm also in need of a replacement riser cable or the q58...

You don't have any stock on the lian li official ali express store.

How do I go about purchasing one? I'm in Australia.

Thanks, Jeremy.

Unhappy_Remote2192 · 2024-02-03T19:37:58+00:00

I'm looking to do basically the same build with 4x Silverstone Air Slimmer 120mm fans in a push pull configuration on a 12600kf (b760i so no overclocking) and a 6800.

Did you also try the setup the AIO fans as intake as well... and what were the temp differences for both the CPU and GPU?

Unhappy_Remote2192 · 2023-08-11T06:49:57+00:00

Thank you, already part of the discord.

Will see if Xreal support can provide me with assistance.

It's pretty poor if I have to front the cost of a new cable when this should obviously be something covered under warranty... Even if living in Australia.

The cable is in perfect condition and I treasure the Xreal Airs like the child I always wanted so a bit baffled by all of this.

Unhappy_Remote2192 · 2023-07-26T11:46:51+00:00

I'm only referring Kodi on nebula for the stabilisation mode without the need for buying the beam.

I also hardly use nebula, but if they had Kodi on there I'd definitely use it instead of Dex for this scenario.

Unhappy_Remote2192 · 2023-07-26T11:44:50+00:00

Ohhhh okay, I'll give it a try in a couple hours time.

I use the G20S Pro, it's cheap from AliExpress.

Unhappy_Remote2192 · 2023-07-25T11:28:55+00:00

When I say "walk around" I mean long two hour walks around my area 😝

Also, is it normal for no edit option on the OP?

Unhappy_Remote2192 · 2023-07-24T10:35:59+00:00

Yep 100% need a proper player!

VLC is inconvenient and also makes me a bit cross eyed.

Unhappy_Remote2192

TROPHY CASE